Browse > Article

A Case Study of Innovative Engineering Education System by Idea Factory (Development of Temperature-Humidity Control Device for Fiber Storage on Composites)  

Park, Soo-Jeong (Department of Mechanical Engineering, Korea Maritime and Ocean University)
Kim, Yun-Hae (Department of Mechanical Engineering, Korea Maritime and Ocean University)
Publication Information
Journal of Engineering Education Research / v.20, no.1, 2017 , pp. 63-68 More about this Journal
Abstract
This research is as a case study of innovative engineering education system through idea factory of korea maritime and ocean university and deals with development of temperature-humidity control device (THCD) for fiber storage on composites in viewpoint of problem solving method. Fiber reinforced plastic (FRP) includes many variables on the composite manufacturing process. Above all, the interfacial adhesion between the fiber and the matrix acts as an important thing that decided mechanical property of the FRP, and also it is profoundly linked to external temperature and relative humidity. High void fraction leads to a result in interlaminar fracture. Therefore, in this research, to establish correlation between fiber reinforcement and fiber storage conditions of temperature and relative humidity we developed a THCD for fiber reinforcement. To evaluate performance of the THCD, glass fiber reinforced plastic (GFRP) is made under the extreme conditions each temperature $34^{\circ}C$, relative humidity 98 % and it can be said that there are the change of mechanical properties according to fiber storage conditions. As a result, the THCD showed sufficient possible application for understanding and applied research of composites field in material engineering. Also, we could check that the necessity of introduction of innovative system such as idea factory existed.
Keywords
Case Study; Innovative Engineering Education System; Composites; Idea Factory; Temperature-Humidity Control Device (THCD);
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 김동규 외(1994). 탄소섬유 및 탄소복합재의 물리적/기계적 특성에 대한 고온열처리의 영향 연구, 한국재료학회, 4(3), pp. 287-294
2 김연직(2009). 평직유리섬유강화 에폭시 적층판의 기계적 특성 이방성, 한국자동차공학회, 17(3), pp. 15-21
3 김종운, 김형근, 이대길(2004). 압착에 따른 탄소직물 페놀 복합재의 두께방향 열팽창계수와 기공분율, 대한기계학회, pp. 192-197
4 문창권 외(1990). 섬유의 표면처리가 탄소섬유강화 복합재료의 기계적 특성에 미치는 영향. 2. 계면강도에 미치는 표면처리의 효과, 한국고분자학회, 14(6), pp. 630-637
5 송민규 외(2010). 고온습도 및 저온 환경이 복합재 접착 체결부 강도에 미치는 영향 연구, 한국항공우주학회, 38(2), pp. 119-128   DOI
6 이강(2009). LEGO MINDSTORM NXT를 이용한 공학설계입문 운영사례, 한국공학교육학회, 12(2), pp. 83-88
7 이종수 외(2008). 체험학습기반의 기초 창의공학설계 교육 및 운영, 한국공학교육학회, 11(2), pp. 32-41
8 장윤정, 이장호, 강기원(2012). 구조시험 및 유한요소해석을 통한 소형풍력발전용 복합재 블레이드의 구조 안전성 평가, 대한기계학회논문집A, 36(9), pp. 1087-1094   DOI
9 Grunenfelder, L.K. & Nutt, S.R.(2010). Void formation in composite prepregs - effect of dissolved moisture. Composites Science and Technology, 70, pp. 2304-2309.   DOI
10 Kay, J. et al.(2011). Effect of process conditions on porosity in out-of-autoclave prepreg laminates. Proceedings of ICCM-18 Conference, Jeju Island, Korea.
11 김윤해, 박세호, 사토 야스다, 쿠보타 슈스케(2011), 창의성 공학, 문운당(2011년 우수학술도서 선정)