• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1136-1141
• /
• 2003

Among various methods to manufacture the PDP barrier ribs, the pressing and the roll forming methods are simple and economical because they form the ribs by utilizing the plastic flow of the green tape in a relatively short time without generating air-polluting dusts. In the present study, the roll forming method was investigated by experiments as well as numerical analyses and in result the groove roll and the preform were designed. The effect of draft angle, comer radius, and initial thickness of the green tape on the plastic flow was examined by a series of parametric studies. The preform was recommended to ease the plastic flow into the grooves and to avoid the occurrence of crack during rolling and sintering processes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2082-2088
• /
• 2002

Among various methods to manufacture the PDP barrier ribs, the pressing and the roll forming methods are simple and economical because they form the ribs by utilizing the plastic flow of the green tape in a relatively short time without generating air-polluting dusts. In the present study, the roll forming method was investigated by experiments as well as numerical analyses and in result the groove roll and the preform were designed. The effect of draft angle, corner radius, and initial thickness of the green tape on the plastic flow was examined by a series of parametric studies. The preform was recommended to ease the plastic flow into the grooves and to avoid the occurrence of cracks during rolling and sintering processes.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.96-99
• /
• 2008

Purpose: A meningoencephalocele is a congenital malformation involving herniation of the meninges and cerebral tissue through a defect in the skull. For the patient with frontoethmoidal meningoencephalocele with hypertelorism, the removal of the meningoencephalocele without correction of the combined hypertelorism is not enough for getting a good cosmetic appearance. Correction of the hypertelorism is needed for cosmetic problem. We experienced a case of simultaneous correction of frontoethmoidal meningoencephalocele with hypertelorism. Methods: The meningoencephalocele was removed and the hypertelorism was corrected by central segment technique. The bone defects were filled with autogenous bone dusts. And the nose was reconstructed by a calvarial bone graft. Results: The patient had a good cosmetic appearance without any neurological complications without serious complications. Conclusion: We experienced a case of simultaneous correction of frontoethmoidal meningoencephalocele with hypertelorism. And a brief review of related literatures is given.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.367-373
• /
• 2016

Many of plastic powders handled in industry are combustible and have the hazard of dust fire and explosion accidents. However poor information about the safe handling has been presented in the production works. The aim of this research is investigated experimentally on explosive characteristics of various plastic powders used in industry and to provide additional data with safety informations. The explosibility parameters investigated using standard dust explosibility test equipment of Siwek 20-L explosion chamber. As the results, the dust explosion index ($K_{st}$) of ABS ($209.8{\mu}m$), PE ($81.8{\mu}m$), PBT ($21.3{\mu}m$), MBS ($26.7{\mu}m$) and PMMA ($14.3{\mu}m$) are 62.4, 59.4, 70.3, 303 and 203.6[$bar{\cdot}m/s$], respectively. And flame propagation velocity during plastic dust explosions for prediction of explosive damage was estimated using a flame propagation model based on the time to peak pressure and flame arrival time in dust explosion pressure assuming the constant burning velocity.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.479-488
• /
• 2018

The issue of waste and its recycling is perceived as a worldwide environmental problem, and the plastic waste is perceived as the biggest social problem threatening the lives of mankind. The vertical protective net, manufactured by using the plastic resin is vertically installed on the outside in case of formwork at the construction site, in order to prevent the fallen objects and scattered dusts. The objective of this study is to understand the actual use status of vertical protective net in the construction site, to examine the changes in the environment-related regulations recently strengthened in the construction site, and also to improve the field technicians' perception of it. And based on it, this study aims to suggest the measures for using the rational and environment-friendly materials and also for promoting the recycling of vertical protective net as the vertical protective nets made of plastic resin are thoughtlessly used in the construction site.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.27-38
• /
• 1993

In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.