• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.3
• /
• pp.42-55
• /
• 1985

The study is concerned with the investigation of curved line folding of developable surface from flat sheets of metal. General geometric relations among folding line, folded surface, folded angle are derived. From the derived geometric relations, the required plastic work and punch force are derived for the first approximation. Five methods of forming are suggested and the experiment is carried out using two chosen methods for the prismatic developable surfaces of which cross-sections have 103.deg.arc, 180.deg.arc, sinusoidal shape. In the die design for the tolding of prismatic developable surfaces, a stack of sheets were used to form shapes of the dies by which acceptable folded surfaces were obtained. The computed plastic work and punch force turned out to be in reasonable agreement with the experimental result.

• Journal of Welding and Joining
• /
• v.21 no.4
• /
• pp.75-79
• /
• 2003

The welding distortion of a hull structure in the shipbuilding industry is inevitable at each assembly stage. This geometric inaccuracy caused by the welding distortion tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding distortion. The validity of the prediction method must be also clarified through experiments. For the purpose of reducing the weld-induced bending deflection, this paper proposes the plastic counter-deforming method (PCDM) using the line heating as the optimum distortion control method. The validity of this method has been substantiated by a number of numerical simulations and actual measurements.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.206-213
• /
• 2001

Dynamic deformation of metallic materials mostly accompanies substantial amounts of deformation heat. Since the flow stress of deformation is sensitive to temperature, implication of heat due to plastic work is essential to the evaluation of constitutive relations. In this study, a series of compression tests were conducted for SAF 2507 super duplex stainless steel at various temperatures and strain rates. The accumulation of plastic work was calculated through numerical integration and converted into the elevation of temperature. Subsequent logarithmic interpolation deduced isothermal flow surfaces, which were primary input data of finite element analysis. Simple closed die forging process was analyzed and optimized with commercial FEM code applying both raw and calibrated material database. The effect of accounting deformation heat was more noticeable in high-speed forming process.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.68-74
• /
• 1998

In this work, we have been concerned with developing an intelligent mold design system for plastic injection molding on the AutoCAD. We have concentrated on building a viable environment, including a mold parts database and a menu-driven user interface. This provides a more interactive and interface for selection of optimal mold-base and mold parts in mold design system. This work presents a method which allows the designer to select the mold parts and mold-base directly within an AutoCAD environment. It can also automatically generate detailed 3D drawings of the mold parts and mold-base. The system shows its potential capability for future enhancement. Since the system is independent of the data, it could easily be extended to other mold-bases and mold parts. In addition, it can be linked to the molding analysis system by creating subtracted 3-D models.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.156-160
• /
• 1996

In this study of made Unloader is moving linear transfer system for mainly plastic working or forming of small electronic unit and other at press line. This machine for lading and unloading a workpiece has been installed in a press in order to load and unload a workpiece form a press die. Control method be used PLC. it took data of input from each sensor and send signal of output to actuator today we have a lot of problem at work of press line. most of press work be operated by human so they often hurted terreble accident by press machine. Because press working system in automotive factories are now changing over to a transfer press working system this Unloader will give more easily and speedy production and manpower saving less of pruduction cost high perfomance

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.618-623
• /
• 2000

In order to increase the porductivity of electrical parts, manufacturing processes using progressive dies have been widely used in the industry. Motor cores have been fabricated using progressive stacking die with the lamination procedure for better electro-magnetic property. for the proper design of a process, a prediction of the process is required to obtain many design parameters. In this work, rigid-plastic finite element analysis is carried out in order to simulate the lamination this work, rigid-plastic finite element analysis is carried out in order to simulate the lamination process of the motor core. The effects of the embossing depth and the amount of deviation are investigated and compared with experiments. The forming process can then be predicted successfully from the results of analyses, which enables to design appropriately the die and the process.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.13-22
• /
• 2005

In order to convey exactly what a work is intended to project, it is necessary to select appropriate materials, those whose features are suitable for the work to be accomplished. Among the recent trends in dyeing involve the use of the designers' own techniques and a variety of materials, as well as the designers' efforts at promoting the value of plastic art. According I choose splendid butterfly patterns that diversity in shape and color, among nature patterns offer unlimited imaginative power. I designed the fabric pattern, using tie dyeing, cone dyeing, transfer dyeing and rub dyeing that can best express my intentions. Therefore a total of four works were designed with aesthetically appealing revised shapes of a butterfly, using materials developed using the same method, to suggest the possibility of creating a new design while maintaining the original beauty of plastic art.

• Archives of Plastic Surgery
• /
• v.43 no.2
• /
• pp.145-152
• /
• 2016

Background Innovation has molded the current landscape of plastic surgery. However, documentation of this process only exists scattered throughout the literature as individual articles. The few attempts made to profile innovation in plastic surgery have been narrative, and therefore qualitative and inherently biased. Through the implementation of a novel innovation metric, this work aims to identify and characterise the most prevalent innovations in plastic surgery over the last 50 years. Methods Patents and publications related to plastic surgery (1960 to 2010) were retrieved from patent and MEDLINE databases, respectively. The most active patent codes were identified and grouped into technology areas, which were subsequently plotted graphically against publication data. Expert-derived technologies outside of the top performing patents areas were additionally explored. Results Between 1960 and 2010, 4,651 patents and 43,118 publications related to plastic surgery were identified. The most active patent codes were grouped under reconstructive prostheses, implants, instruments, non-invasive techniques, and tissue engineering. Of these areas and other expert-derived technologies, those currently undergoing growth include surgical instruments, implants, non-invasive practices, transplantation and breast surgery. Innovations related to microvascular surgery, liposuction, tissue engineering, lasers and prostheses have all plateaued. Conclusions The application of a novel metric for evaluating innovation quantitatively outlines the natural history of technologies fundamental to the evolution of plastic surgery. Analysis of current innovation trends provides some insight into which technology domains are the most active.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.4
• /
• pp.266-278
• /
• 1995

The high strain-rate dynamic plastic behavior of Fe-X%Mn alloys was investigated. The strain rate did not have an effect when tested under quasi-static strain rates($2{\times}10^{-3}/sec$ and $2{\times}10^{-1}/sec$). However, the true stress increased at all strain levels when the strain rate increased to $6{\times}10^3/sec$. Based on the experimental results, an constitution equation to calculate the dynamic strength for strain rates over $10^4/sec$ was determined. The Fe-5%Mn alloy containing athermal ${\alpha}^{\prime}$ martensite initially did not show work hardening. The work hardening increased with Mn content showing a maximum at 20% Mn. The high work hardening of Fe-20%Mn and Fe-30%Mn alloys appears to be closely related not only to the initial amounts of ${\varepsilon}$ martensite but to the strain induced transformation (${\gamma}{\rightarrow}{\varepsilon}$ and ${\varepsilon}{\rightarrow}{\alpha}^{\prime}$) occurring during each stages of deformation.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.289-295
• /
• 2022

Background Massive weight loss (MWL) is a very common presentation that you may face as a plastic surgeon. Each patient has his own individual criteria, so, you should work according to a well-organized plan, especially when such cases have concerns about their gluteal area contour that were neglected before by many surgeons. A decision-making strategy was used to give a personalized treatment for targeting gluteal region reshaping of MWL patients. Methods This study considered all patients with MWL subjected to buttock reshaping. There was no randomization in treatment; there was a case-by-case assessment. We analyzed the features of the buttocks, the type of surgery performed, the outcomes, and the complications. Results Fifty two patients were included (41 females and 11 males), ages ranged between 21 and 66 years. Demographic data, preoperative body mass index (BMI), duration of surgery, type of surgery, and postoperative complications were collected. Statistically significant improvements were observed in gluteal ptosis and patient satisfaction grades. Conclusion Aesthetic improvement of the buttocks involves either augmentation or contouring that may be obtained by liposculpture, surgical lifting, or combination. Patients with MWL have high expectations and are often treated with multiple procedures. Thus, an easy strategic approach personalized on each patient to treat multiple adjacent areas in one operation is necessary. Adipose tissue distribution, gluteal skin status, and BMI were the main factors that can forcefully affect our plan to guarantee reduction of unpleasant results and complications and improve patient satisfaction.