• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.170-173
• /
• 2017

In this study, we fabricate amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) with three different gate electrode materials of Al, Mo and Pt on plastic substrates and investigate their electrical characteristics. Compared to an a-IGZO TFT with Al gate electrode, the threshold voltage of an a-IGZO TFT with a Pt electrode decreases from -4.2 to -0.3 V. and the filed-effect mobility is improved from 15.8 to $22.1cm^2/V{\cdot}s$. The threshold voltage shift of the TFT is affected by the difference between the work function of the gate electrode and the Fermi energy of the channel layer. Moreover, the Pt gate electrode is considered to be the suitable material in terms of the electrical characteristics of the TFT. In addition, an description on an a-IGZO TFT with a Mo electrode will be given here.

• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.31-44
• /
• 2002

This study was intended to inquire into Check Pattern. The purpose of this study attempted to make a systematic investigation of the characteristic of the Check Pattern, the checker using vertical and horizontal lines which was the universal plastic element and inquire into it in terms of era, designers and combined work. By doing so, this study attempted to Investigate the phase of the Check Pattern in world fashion and further forecast the future of checker design applicable to the 21th century fashion. The result can be summarized as follows : 1. Mondrim's neo-plasticism has not only had a great influence on Op Art and Minimalism work but is deeply related to fashion and textile design. Mondrian used vertical and horizontal line ad the dualistic element. 2. The checker is estimated to have been used since the Etruian times, though uncertain. and largely divided into the Madras check and Scotland Check. Though the origin of the tartan representation of the Scotland check can not be accurately found out, it began to emerge in around the 13th century. 3. Check Pattern has began to be widely used with the development of the textile industry since 1826 and been used in every typical Sihoutto appearing in each era up to the present. And Check Pattern is used most designer in the world, who represent their own personality in their works. This study could find out that the checker is the element of Infinite applicability in the future. It is expected that the sophisticated and beautiful design using the chocker will be presented by many korean designer though the overall and systematic study of the checker.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.11
• /
• pp.1228-1235
• /
• 2012

A refrigerator has many components which are made from diverse materials such as metal, polymer, plastic, and rubber. So, it generally requires much time and efforts to build up an analysis model in finite element analysis. In this work, to reduce the computational time and efforts a simplified modeling method was proposed for the analysis of a refrigerator. Occasionally, a stick-slip noise occurs in a refrigerator due to relative slip between shelf and inner-case. When we solve the problem by a FE analysis, we should model the structures with detail for considering the contact conditions; by this reason, too many efforts are consumed in the conventional analysis method. Through this work, we shows the concept of simplifying approach and a good agreement with the results of a real model analysis. And also, the evaluation of the proposed method and the application of contact analysis using the simplified model are discussed.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.29-36
• /
• 2011

In this study, a series of the isotropic compression-expansion tests and the drained triaxial tests were performed on Pocheon granite soil with various the dry densities of $16.67kN/m^3$, $17.26kN/m^3$ and $17.65kN/m^3$. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. The soil parameters such as kur and n related to elastic behavior, m and ${\eta}_1$ related to failure criterion, c and p related to hardening function and ${\psi}_2$ and ${\mu}$ related to plastic potential show in a positive linear relationship with the dry density. Since the soil parameters h and representing yield function do not change much to relative density and also are closely related to failure criterion, they can be replaced by failure criterion. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data.

• Composites Research
• /
• v.17 no.5
• /
• pp.54-60
• /
• 2004

A new three-dimensional model for predicting the relationship between the prestrain of the composite and the amount of phase transformation of shape memory alloy inducing shape memory effect has been proposed by using Eshelby's equivalent inclusion method with Mori-Tanaka's mean field theory. The model composite is aluminum matrix reinforced with short TiNi fiber shape memory alloy, where the matrix is work-hardening material of power-law type. The analytical results predicted by the current model show that most of the prestrain is induced by the plastic deformation of the matrix, except the small prestrain region. The strengthening mechanism of the composite by the shape memory effect should be explained by excluding its increase of yield stress due to the work-hardening effect of the matrix.

• Korean Journal of Community Nutrition
• /
• v.14 no.5
• /
• pp.576-589
• /
• 2009

The purpose of this study was to analyze the status of school foodservice facilities, utilities and equipment & sanitary education in provinces, This study was carried out from September 2008 until December 2008 and is targeted towards schools' dietitians that work at schools with school foodservice. 1,623 schools participated in this research and Kangwondo, Choongchungdo including the metropolitan area with frequent occurrence of food bone disease were the targets of this research. The regional distribution of this research is as follows; 377 schools in Seoul, 648 schools in Gyeonggido, 160 schools in Kangwondo, 438 schools in Choongchungdo equaling 1,623 schools in total. And out of the total 1,623 schools, 815 (50.2%) were elementary schools and 808 (48.8%) were middle and high schools (p < 0.001). Most of the elementary schools, excluding 4 schools, were self-operated. In the case with middle and high schools, 81.5% (513 schools) were self-operated and 18.4% (295 schools) were contracted. When dealing with the sanitation management of school foodservice in Kangwondo and Seoul, elementary schools were less equipped with equipment and facilities than middle and high schools which proved that they were in need of improvements (p < 0.01). Schools with self-operated foodservice, in particular, were in need of preparation zone improvements. 52.3%~88.0% of stainless equipment such as utensils, spoons/chopsticks, subsidiary food tray, and food trays were sterilized by dryers. Work tables, vegetable slicers, and mincers were chemically sterilized and plastic materials were sterilized by ultraviolet rays. Data from newspapers, Internet and TV are collected beforehand and then an annual hygiene educations plan for employees are put together. Hygiene education for employees are carried out monthly through oral method.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.221-230
• /
• 2017

Objectives: This study was conducted to investigate general characteristics, job characteristics, characteristics of hospitals, and hospital coordinators, and to investigate the factors affecting the job satisfaction of medical workers. Methods: The data was collected through a self-reported questionnaire among 435 workers in plastic surgery and dermatology clinics in metropolitan city G. We investigated general characteristics, job-related characteristics, characteristics of medical institutions and hospital coordinators, job performance of hospital coordinators, and job satisfaction of medical workers. T-tests, ANOVA, correlation, and multiple regression analyses were conducted to investigate the factors related with job satisfaction. Results: The job satisfaction of the medical workers and the perceived job performance of hospital coordinators were $3.55{\pm}0.40$ and $3.74{\pm}0.43$, respectively. In multiple regression analysis, drinking frequency, number of night shifts, number of work days, and hospital coordinator introduction years were associated with the job satisfaction of medical workers. The more the overall job performance of hospital coordinators increased, the higher was job satisfaction(B=0.458, p<0.001). In detail, the more job roles(B=0.218, p<0.001), core competency(B=0.145, p=0.005), and leadership(B=0.099, p=0.037) increased, the higher was the job satisfaction of medical workers. Conclusions: The job satisfaction of the medical institution workers was associated with the perceived job performance of the hospital coordinator. In order to increase the job satisfaction of medical institution workers, a hospital coordinator with specialized job performance will be able to improve job satisfaction by carrying out efficient work in the medical institution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1C
• /
• pp.11-17
• /
• 2011

This study was performed a series of the isotropic compression-expansion tests and the drained triaxial tests with various the relative densities 25%, 50%, 80% and 100% for Baekma river sand. Using the tests results the characteristic of the parameters of Lade's single hardening constitutive model were investigated. The soil parameters Kur and n representing elastic behavior are not much affected by the change of the relative density. The other parameters such as failure criterion (m, ${\eta}_1$), hardening function (C, p) and plastic potential (${\Psi}_2$, ${\mu}$) are in a positive linear relationship with the relative density. Since the soil parameters h and $\alpha$ representing yield function do not change much to the change of relative density and also closely related to failure criterion, they can be replaced by failure criterion ${\eta}_1$. We also observed that predicted values from the Lade's single hardening constitutive model were well consistent with the observed data.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.172-184
• /
• 2017

The hardness and mechanical properties of the minerals in the Daejeon granite according to depths were investigated by indentation test, load-unload test, and cycle test of dynamic ultra-micro hardness. As a result of the tests, it was possible to classify into three mineral groups (Group-1, -2, -3). The Martens hardness was not significantly different between 41 m and 223 m depths in three mode tests. Nevertheless, they showed in the order of a cycle test < load-unload test < indentation test. Considering the average Martens hardness, elastic modulus, and indentation work for each mineral group, their boundaries were relatively clear. In conclusion, A relatively accurate hardness of minerals can be obtained by three mode tests of dynamic ultra-micro hardness. In addtion, it was possible to characterize the elastic modulus and the elastic-plastic properties of the minerals from the load-unload and cycle tests.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.30-36
• /
• 2019

The tribological properties of paper-based friction materials are crucial to the performance of a wet clutch system. In this work, the friction and wear characteristics of a paper-based friction material in boundary lubrication state was experimentally investigated using a pin-on-reciprocating tribotester under various normal forces and temperatures. It was found that the wear rate of the friction material increased from $5.8{\times}10^{-6}mm^3/N/cycle$ to $5.5{\times}10^{-5}mm^3/N/cycle$ after 1,700 cycles of testing at $80^{\circ}C$ as normal force increased from 2 N to 7 N. The friction coefficient was also found to increase from 0.135 to 0.155 with increasing normal force from 2 N to 7 N. The increase in contact pressure with increasing normal force may be responsible for these results. In addition, as temperature increased from $20^{\circ}C$ to $80^{\circ}C$, the wear rate of the friction materials increased from $2.0{\times}10^{-5}mm^3/N/cycle$ to $3.6{\times}10^{-5}mm^3/N/cycle$ while the friction coefficient decreased from 0.163 to 0.146. This result may be associated with the decrease in the hardness of friction materials with increasing temperature. Furthermore, plastic deformation on the friction materials was mainly observed after the test. The outcome of this work may be useful to gain a better understanding of the tribological properties of friction materials, and therefore can contribute to the development of friction materials with enhanced performance for wet clutch systems.