• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 추계산학기술 심포지엄 및 학술대회 발표논문집
• /
• pp.135-138
• /
• 2001

본 연구는 플라스틱 기어의 3차원 모델링과 성형성 해석을 통하여 합리적인 설계방안을 제시하려는 것이다. 사출기어의 복잡한 형상을 효율적으로 모델링하기 위해 3차원 솔리드 모델링 기법이 사용되었고 설계된 기어의 성형성을 해석하기 위해 유동해석 프로그램이 사용되었다. 이러한 방법을 통하여 설계의 납기 단축이 가능하게 되며 아울러 성형성을 고려한 설계를 수행할 수 있다.

• 수산해양기술연구
• /
• 제60권3호
• /
• pp.269-276
• /
• 2024

In response to the global interest and efforts towards reducing plastic use and promoting resource recycling, there is a growing need to establish methods for recycling discarded fishing gear. In Korea, various technologies are being developed to recycle discarded fishing gear, but significant technical and policy challenges still remain. In particular, biodegradable gill nets require a pre-treatment process to separate biodegradable materials from other substances and to remove salt before recycling. Therefore, this study aims to develop a pre-treatment device for recycling biodegradable gill nets and to evaluate the feasibility of recycling them.

• Structural Engineering and Mechanics
• /
• 제31권1호
• /
• pp.39-56
• /
• 2009

Vibration is an undesirable phenomenon in a dynamic system like lightly damped aerospace structures and active vibration control has gradually been employed to suppress vibration. The objective of the current investigation is to introduce an active torsional magneto-rheological (MR) fluid based damper for vibration control of a typical nose landing gear. They offer the adaptability of active control devices without requiring the associated large power sources. A torsional damper is designed and developed based on Bingham plastic shear flow model. The numerical analysis is carried out to estimate the damping coefficient and damping force. The designed damper is fabricated and an experimental setup is also established to characterize the damper and these results are compared with the analytical results. A typical FE model of Nose landing gear is developed to study the effectiveness of the damper. Open loop response analysis has been carried out and response levels are monitored at the piston tip of a nose landing gear for various loading conditions without damper and with MR-damper as semi-active device. The closed-loop full state feedback control scheme by the pole-placement technique is also applied to control the landing gear instability of an aircraft.

• 한국항공우주학회지
• /
• 제34권8호
• /
• pp.87-94
• /
• 2006

본 연구에서는 헬리콥터 스키드형 강착장치에 대한 비선형 충돌해석을 수행하였으며, 실제 운용중인 헬리콥터(SB427)의 강착장치 시스템이 해석에 고려되었다. 재료의 소성 거동특성과 두께변화를 고려한 3차원 유한요소 모델을 구축하였으며, LS-DYNA(Ver.970)를 활용하여 다양한 충돌 조건에 대한 전산충돌해석을 수행하여 특성을 검토하였다. 지면충돌에 기인한 강착장치의 비선형 천이응답이 설계요구조건에 대해 검토되었다. 다양한 충돌조건에 대해 비선형 충돌해석으로 예측한 최대 구조 변형량을 실험결과와 정량적으로 비교하였으며, 마찰의 영향을 고려하는 것이 해석결과의 정확성에 매우 중요함을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.113-114
• /
• 2006

• 한국기계가공학회지
• /
• 제2권1호
• /
• pp.92-99
• /
• 2003

Bevel gears are important mechanical parts to transmit power in transportation system high precision parts like bevel gears might be manufactured by closed die forging process for dimensional accuracy. Closed die forging of bevel gears offers the high quality and good mechanical properties and also leads to considerable cost saving. To determinate the proper closed-die forging process for bevel gear forms, three-dimensional finite element simulation for the progressive forging process was earned out and also the simulation results were compared with experimental results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.147-152
• /
• 2000

The ASF(Automatic Sheets Feeders) part of the printer has many bosses supporting gear-trains. Steel-pin bosses are substituted for plastic mold bosses because of advantages such as cost reduction, convenience of manufacturing and accuracy in dimension, but they have a weak point such as fatigue fracture due to low material strength, which causes a serious problem in the reliability of product. To prevent the fatigue fracture of bosses, we should exactly estimate the life to failure of the various shapes of bosses. We take the linear FEM analysis and the statistical method in this paper to figure out the life to failure of bosses. The maximum stress and life to failure of bosses can be easily estimated by this method. This paper specifies how to figure out the life to failure of bosses.

• 소성∙가공
• /
• 제6권4호
• /
• pp.291-299
• /
• 1997

This paper is concerned with the design of process sequence to form the inner skin of landing gear. The inner skin of landing gear is a part of airplane which is known to be difficult to form its shape. Our study investigates the production method of inner skin and examines the design criteria by three dimensional elastic-plastic finite element method. Based on the results of simulation, design strategy for improving the process sequence is developed using stretch forming process. The final product of inner skin is produced in multi-stage operations with annealing treatment to meet the required capacity of press. The numerical results show that the newly designed process can produce the required part successfully within the design criteria.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.1-5
• /
• 2008

Plastic parts are molded for the purpose of mass production in injection molding. Therefore designer is usually designing molds that has geometrically balanced hot runner lay-out for filling balance at cavities. Although, mold is manufactured with geometrically balanced runner lay-out, there are actually filling imbalances in cavities. These filling imbalances phenomenon are caused by complicated interaction between melt and mold. In this paper, filling imbalances for internal gear based on injection molding in hot-runner mold were investigated by CAE and injection molding experiences.

• 한국융합학회논문지
• /
• 제2권2호
• /
• pp.27-34
• /
• 2011

본 연구는 호빙 가공공정 없이 워엄 휠 기어 형상을 만들기 위한 워엄 휠의 개발을 위한 제품을 만드는 것이다. 호빙 가공 공정이 없기 때문에, 증가된 생산성과 등가의 품질을 가지는 플라스틱 워엄 휠이 결국 만들어지게 된다. 그 결과, 이 제품은 현대 모비스, 만도, TRW, KOYO/NSK/Showa(Japan), Delphai(Amercia)에 판매 될 것이다. 핵심 기술 및 전략은 다음과 같다. 워엄 휠의 성형을 위한 기술 보호는 최근 "헬리컬 기어(No. 10-2008-0105908) 성형"이 특허 공정으로 되어 있다. 나아가, "보스 삽입을 위한 위치 결정을 위한 성형 시스템"을 위한 특허 절차가 준비 중이다. 기어 기계가공 절차 없이 호빙 머신에 기어 성형 절차로서, 무엇보다 먼저, 기어를 만드는 코어 개발 기술이 주된 주제이다. 따라서, 코어 및 성형 기초가 초기 순서로 개발되지 않아서, 현재 개발되는 워엄 휠의 경우, 기어는 이차적으로 호빙 M/C로 기계가공 된다. 최종적으로는, 성형 기초 구조체를 위한 특허가 본 연구결과로 만들어질 예정이다.