• 자원리싸이클링
• /
• 제11권1호
• /
• pp.37-42
• /
• 2002

This study was conducted in order to remove Poly vinyl chloride(PVC) from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC and PE(poly ethylene). PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with his grade of 99% or more, using the improved Air Table. The details of the separation condition and results will be discussed in this paper. Dry separation, Waste plastic film, PVC, Air Table. The details of the separation condition and results will be discussed in this paper.

• 한국토양비료학회지
• /
• 제49권2호
• /
• pp.115-124
• /
• 2016

The objectives of this study were to evaluate the soil fertility about plastic film house, upland, and orchard in Gyeongbuk Province, Korea. The surface chemical properties of soil samples were investigated every 4 year from 2000 year at upland, 2001 year at orchard, and 2002 year at plastic film house. During 12 year's monitoring, mean soil pH was increased by 0.7 and 0.8 pH unit from pH 5.7 in upland and orchard, respectively, 0.5 pH unit from pH 6.5 in plastic film house. About 50% of all the field samples occupied within the recommended pH range (pH 6-7). Although soil organic matter (SOM) was gradually increased by about $10g\;kg^{-1}$ for 12 years, 40% of orchard, 49% of plastic film house, and 77% of upland soil samples were still below the 3% SOM. The mean concentration of available phosphate for 12 years in upland, orchard, and plastic film house were 530, 600, and $760mg\;kg^{-1}$, respectively. The relative frequencies exceeding the recommended available phosphate range ($300-550mg\;kg^{-1}$) were 43%, 53%, and 66% at upland, orchard, and plastic film house soils, respectively. $NH_4OAc$ exchangeable $K^+$ of upland, orchard, and plastic film house in the last soil test were 0.8, 0.9, and $1.6cmol_c\;kg^{-1}$, respectively. The relative frequencies above the recommended K level were 56% and 70% of orchard and plastic film house soil samples, respectively. The levels of crop nutrients except exchangeable Ca and Mg in upland soil were tended to increase gradually in the three fields. Exchangeable Mg, EC, available phosphate, organic matter and soil pH could be used as principle components to differentiate the chemical properties of three land fields. This analysis revealed that the soil fertility was affected by cropping method and field management, although additional research is needed to assess the importance of management on soil chemical properties and many fields indicate an opportunity for improvement in fertilizer management.

• 한국토양비료학회지
• /
• 제30권4호
• /
• pp.357-360
• /
• 1997

우리나라의 전국 주요 시설재배지에 있는 비닐하우스 343동을 대상으로 시설내 공기의 아황산($SO_2$)가스 농도를 조사한 결과는 다음과 같다. 1. 하우스내 공기중 아황산($SO_2$)가스 농도는 가온하우스내 농도와 무가온 하우스농도가 유사하나 가온 하우스에서는 0.8ppm이상의 농도가 검출되었다. 2. 아황산가스는 고추재배지에서 화훼류나 오이, 토마토 재배지 보다 농도가 높고 온도가 높은 주간이 야간보다 높은 농도가 검출되었다. 3. 가온하우스의 아황산가스의 유출은 온풍기의 파손 부위와 연돌의 이음쇄 부위이며, 연돌을 통해 외부에 배출된 아황산가스가 공기 흡입으로 재유입되는 경우도 있다. 4. 환기를 하지 않은 하우스는 아황산가스 농도가 0.6ppm이나 동일한 조건에서 환기를 한 것은 0.2ppm으로 낮았다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.134-138
• /
• 2021

스마트폰 등에서 사용되는 고성능 디스플레이에는 다양한 종류의 정밀한 플라스틱 박막 필름(Plastic Thin Film)이 사용되고 있다. 롤투롤(Roll-To-Roll) 공정으로 제조되는 플라스틱 박막 필름은 생산 공정 중에 실시간으로 필름의 두께가 계측되고, 정확하게 관리되어야 한다. 필름 제조 과정에서 필름에 장력이 작용하면서 주름이 발생되고, 이러한 주름 발생은 필름의 두께 방향과 두께 측정기의 광축이 서로 경사지게 한다. 결국 두께 측정기는 필름의 수직 두께가 아닌 경사진 두께를 측정하게 됨으로써 실제 두께보다 더 큰 값으로 측정하게 된다. 본 연구에서는, 플라스틱 필름의 경사로 인하여 발생하게 되는 두께 측정기에서의 계측값 오차를 보정하기 위하여, 필름의 경사 각도를 계측하는 연구가 진행되었다. 플라스틱 필름에 슬릿 빔 레이저를 조사하고, 필름에서 반사되는 슬릿 빔 레이저가 PSD(Position Sensitive Device)에 맺히는 광학 시스템을 구성하였으며, 실험을 통하여 필름의 경사 각도와 PSD 출력값의 관계를 1차 방정식 형태로 구하였다. 이를 이용하여 필름의 경사 각도를 측정하는 장치가 구축되었으며, 250KHz의 속도로 경사 각도의 측정이 가능하였다.

• 한국축산식품학회지
• /
• 제43권6호
• /
• pp.1128-1149
• /
• 2023

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.89-90
• /
• 2000

A new technology realizing interconnection between Plastic Film LCDs panel and a driving circuit was developed under the processing condition of low temperature and pressure with ACFs developed for Plastic Film LCDs. The conduction failure of interconnection of the two resulted from elasticity, low thermal resistance and high thermal expansion of plastic substrates. Conductive particles with elasticity similar to the plastic substrate did not damaged a ITO electrode on plastic substrates, and low temperature and pressure process also did not deform the surface of plastic substrates. As a result highly reliable interconnection with minimum contact resistance was accomplished.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.957-961
• /
• 2004

In order to realize high performance thin film transistor (TFT) on plastic substrate, Si film was deposited on plastic substrate at 170$^{\circ}C$ by using inductivity coupled plasma chemical vapor deposition (ICPCVD). Hydrogen concentration in as-deposited Si film was 3.8% which is much lower than that in film prepared by using conventional plasma enhanced chemical vapor deposition (PECVD). Si film was deposited as micro crystalline phase rather than amorphous phase even at 170$^{\circ}C$ because of high density plasma. By step-by-step Excimer laser annealing, dehydrogenation and recrystallization of Si film were carried out simultaneously. With step-by-step annealing and optimization of underlayer structure, it has succeeded to achieve large grain size of 300nm by using ICPCVD. Base on these results, poly-Si TFT was fabricated on plastic substrate successfully, and it is sufficient to drive pixels of OLEDs, as well as LCDs.

• Journal of Information Display
• /
• 제5권3호
• /
• pp.30-34
• /
• 2004

Fabrications of barrier layer on a polyethersulfon (PES) film and OLED based on a plastic substrate by atomic layer deposition (ALD) have been carried out. Simultaneous deposition of 30 nm of $AlO_x$ film on both sides of PES film gave film MOCON value of 0.0615 g/$m^2$/day (@38$^{\circ}C$, 100 % R.H.). Moreover, the double layer of 200 urn $SiN_x$ film deposited by PECVD and 20 nm of $AlO_x$ film by ALD resulted in the MOCON value lower than the detection limit of MOCON. The OLED encapsulation performance of the double layer have been investigated using the OLED structure of ITO/MTDATA(20 nm)/NPD(40 nm)/AlQ(60 nm)/LiF(1 nm)/Al(75 nm) based on the plastic substrate. Preliminary life time to 91 % of initial luminance (1300 cd/$m^2$) was 260 hours for the OLED encapsulated with 100 nm of PECVD deposited $SiN_x$/30 nm of ALD deposited $AlO_x$.

• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.131-134
• /
• 2006

The closed suction drain is commonly inserted after various surgical procedures. It has an important role to prevent possible hematoma or seroma that can cause postoperative wound problems. But there is still no consensus on managing the insertion site of suction drain after operation. Suture-tie fixation of drain to skin and classical Y shape gauze dressing is a usually accepted method, but it has many limitations. We introduce a new approach to the care for the insertion site of suction drain by using occlusive transparent film dressing, $IV3000^{(R)}$(Smith & Nephew, London, UK). By using transparent film, insertion site of drain can be easily checked without removal of dressing. Because it can reduce the tension of suture-tie fixation, it helps to prevent skin injury. Furthermore, occlusive film dressing can block air leakage from insertion site of drain, and the water-proof character of film allows patients to take a shower without dressing change. This new method is more convenient, more efficient, and less harmful to skin than classic one.

• 한국환경농학회지
• /
• 제33권1호
• /
• pp.17-23
• /
• 2014

시설재배 참외 주산지에서는 농가별로 가용 경지면적이 제한되어 있어 동일 포장을 이용한 장기간 연작이 불가피하므로 토양의 염류집적 문제와 함께 선충 피해가 매우 심각하다. 참외 휴경기에 하우스의 비닐을 제거하고 김장배추를 재배하는 이모작 체계는 다음 작기 참외 재배 시 토양 선충 밀도를 줄이는데 아무런 영향을 미치지 못하였다. 일반 참외 연작 하우스와 비교하여 참외-미나리 이모작 하우스에서는 다음 작기 참외 재배기간 동안 6월까지는 토양의 선충 밀도가 상대적으로 낮았는데, 이는 토양을 3개월 정도의 담수 상태로 유지함으로써 얻을 수 있는 효과로 판단된다. 참외-미나리 이모작 하우스에서 다음 작기 참외 정식 전에 살선충제를 처리한 경우에는 참외 재배 후반기까지 선충 밀도가 피해유발수준 이하로 유지되었다. 농가에서 휴경기에 배추와 미나리를 윤작물로 재배하는데, 이러한 단기윤작은 참외 연작 비닐하우스 토양의 선충을 효과적으로 방제하는 방법이 되지 못한다. 따라서 객토, 토양소독, 윤작물 재배 등의 친환경적인 선충방제 수단을 적극적으로 활용하고 그 효과를 극대화할 수 있는 방안들이 강구되어야 할 것이며, 필요에 따라서 적절한 살선충 약제를 사용함으로써 작물생산에 미치는 선충의 피해를 최소화시킬 수 있을 것으로 판단된다.