• 한국축산시설환경학회지
• /
• 제15권2호
• /
• pp.99-106
• /
• 2009

방제기 분야에서 전통과 기술력이 인정받고 있는 일본 마루야마사에서 개발한 원거리 고속팬과 비교실험을 하였다. 비교 실험 결과 일본 마루야마사에서 개발한 원거리 팬은 120m 살포를 한 반면 자체 개발한 원거리 방제기 고속팬은 160m 까지 살포가 가능하였다. 지금까지 원거리 방제기는 일본에서 개발된 제품을 수입하여 국내에 보급하였으나 앞으로는 성능, 가격 및 A/S 측면에서 유리한 국산 원거리 방제기가 시장을 점유할 것으로 판단된다. 주요 연구 결과를 살펴보면 다음과 같다. 실험은 시중에서 판매되고 있는 플라스틱컵을 사용하였다. 컵의 배치는 10m 간격으로 종방향 5개, 횡방향 18개 총 90개를 설치한 후 원거리 고속 방제기가 이동하면서 분사한 양을 보고 분포도를 작성하였다. 분무지점에서 분무방향과 수직을 이루는 거리를 5m 간격으로 고정하고, 분무량과 수평을 이루는 지점에 따른 분무량 및 관찰자 4명의 데이터를 이용하여 평균을 구했다. 방제기가 출발하면서 살포한 경우 0m의 경우와 방제기가 정지하면서 살포를 중지한 20m의 경우 살포가 잘 되지 않은 것으로 나타났다. 방제기가 출발하면서 살포한 경우 10m에서 높은 살포량을 나타냈다. 방제기가 15m 이동했을 때 20m 구간에서 가장 높은 살포를 보였다. 실험결과 방제기가 출발하면서 방제한 경우와 방제기가 포착하면서 방제를 정지한 경우를 제외하고 전 구간에서 일본 마루야마사의 방제기 보다 높은 살포량을 보였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1450-1452
• /
• 2009

In this work, a plastic diffuser which has a surface similar to Sinusoidal wave profile for application of LC D backlighting is proposed. This new pattern diffuser is achieved the values of the transmission efficiency an d diffusion efficiency all over 70%, and it also has the value about gain over 1.1. Additionally, this new patter n diffuser has high uniformity when we put it in the LCD backlight module and its thickness is only 2mm. With these foregoing properties, this diffuser film can widely applied to LCD displays systems etc.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.61-66
• /
• 1987

The metals has been used to the electric motor frame and brackets. The purpose of this project is to substitute engineering plastic doter frame for metal because of the demand for small size and environmental reliability. As a result of considering of mechanical strength, heat and injection characteristic of engineering plastics. PBT GF 30 has been selected as the material of electric motor frame including brackets. Design of the frame has been carried out on enough consideration of mechanical strength, heat-resisting and endurance. For the prevention of lower efficiency, the length of airgap between stator and rotor is reduced and for the reduction of vibration, slot combination is changed and the length of stator is increased.

• Archives of Plastic Surgery
• /
• 제47권1호
• /
• pp.70-77
• /
• 2020

Background As the demand for cosmetic surgery continues to rise, plastic surgery programs and the training core curriculum have evolved to reflect these changes. This study aims to evaluate the perceived quality of current cosmetic surgery training in terms of case exposure and educational methods. Methods A 16-question survey was sent to graduates who completed their training at a U.S. plastic surgery training program in 2017. The survey assessed graduates' exposure to cosmetic surgery, teaching modalities employed and their overall perceived competence. Case complexity was characterized by the minimum number of cases needed by the graduate to feel confident in performing the procedure. Results There was a 25% response rate. The majority of respondents were residents (83%, n=92) and the remaining were fellows (17%, n=18). Almost three quarters of respondents were satisfied with their cosmetic training. Respondents rated virtual training as the most effective learning modality and observing attendings' patients/cases as least effective. Perceived competence was more closely aligned with core curriculum status than case complexity, i.e. graduates feel more prepared for core cosmetic procedures despite being more technically difficult than non-core procedures. Conclusions Despite the variability in cosmetic exposure during training, most plastic surgery graduates are satisfied with their aesthetic training. Incorporation of teaching modalities, such as virtual training, can increase case exposure and allow trainees more autonomy. The recommended core curriculum is adequately training plastic surgery graduates for common procedures and more specialized procedures should be consigned to aesthetic fellowship training.

• 한국농공학회지
• /
• 제38권5호
• /
• pp.106-115
• /
• 1996

This study was carried out to provide fundamental data for reuse of resources and prevention of environmental pollution Actual states of environmental pollution by biological production facilities were investigated. Various pollution loads and quantity of wastes from greenhouse and animal housings estimated. In greenhouse contents of investigation were wastes of plastic cover, noise of heater and fan, air pollutant of heater, and wastes of soilless culture system, etc. In animal housings, those were actual state of livestock waste treatment and reuse, pollutant mass unit discharge, noise pollution, and malodorant, etc. The main pollutants discharged from greenhouses were wastes of plastic cover, rockwool, and waste fluid of nutrient solution. Developments of waste disposal methods for plastic cover and rockwool are required. And recycle technique of nutrient solution for soilless culture should be developed and propagated. With the buildup of legal control, pollutant mass discharged from livestock wastes are, on the decrease. The other side, reuse of livestock excreta increased. Most animal housings are located near the dwelling house. Malodorant and noise from animal housings have bad effects on the rural living conditions. So developments of integrated complex for small scale livestock farms are required.

• 농업과학연구
• /
• 제42권4호
• /
• pp.325-333
• /
• 2015

The ventilation systems composed three types of side vent (roll-up) 'SV', side vent+roof vent 'SV+RV', and side vent+roof fan 'SV+RF' with 7.5 m spacing, with specific set point temperatures for ventilation: SV ($35^{\circ}C$ open / $33^{\circ}C$ close), SV+RV or SV+RH ($35^{\circ}C$ open/$33^{\circ}C$ close for root ventilation and $37^{\circ}C$ open / $35^{\circ}C$ close for side vent). In the treatment of SV+RV, although the average daily maximum temperature inside the greenhouse temporarily increased by $38-40^{\circ}C$, thermal stress by high temperature did not occur and the disease incidence (%) of powdery mildew and downy mildew on the oriental melon were 25 - 75% lower than in the conventional SV treatment. In the SV treatment, the disease incidence (%) of powdery mildew and downy mildew were 1.4 - 7.7% and 4.2 - 15.9% for 'Deabakkul', and 20.3 - 22.8% and 2.8 - 11.3%, for 'Ildeungkkul'. The yield for one month was higher in the treatment of SV+RV than those in other treatments, with values of 2,105 kg/10a for 'Deabakkul' and 2,537 kg/10a for 'Ildeungkkul'. The simultaneous treatment with side vent and roof vent resulted in 16.2% higher yield (18.1% higher marketable yield) than that in the SV treatment for 'Deabakkul'.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.325-334
• /
• 2016

Rock salt is a near-perfect material for gas storage repositories due to its excellent ductility and low permeability. Gas storage in rock salt layers during gas injection and gas production causes the stress redistribution surrounding the cavity. The triaxial cyclic loading and unloading tests for rock salt were performed in this paper. The elastic-plastic deformation behaviour of rock salt under cyclic loading was observed. Rock salt experienced strain hardening during the initial loading, and the irreversible deformation was large under low stress station, meanwhile the residual stress became larger along with the increase of deviatoric stress. Confining pressure had a significant effect on the unloading modulus for the variation of mechanical parameters. Based on the theory of elastic-plastic damage mechanics, the evolution of damage during cyclic loading and unloading under various confining pressure was described.

• 한국균학회지
• /
• 제47권4호
• /
• pp.385-392
• /
• 2019

플라스틱 비닐을 이용한 톱밥배지를 기반으로 하는 표고 재배방식은 환경문제를 일으킬 수 있다. 본 연구에서는 비닐 대신 플라스틱 용기를 이용하여 표고의 재배실험을 실시하였다. 참나무 톱밥과 밀기울을 4:1 비율로 혼합하여 함수율을 65%로 맞춘 톱밥배지를 분리가 가능한 플라스틱 용기에 입병하였다. 접종한 배지는 배양일, 명배양 광조건 등을 달리하여 80일 또는 120일간 배양하였다. NIFoS 2464 균주에서는 300 Lux의 광도에서 명배양을 진행하였을 경우 배지의 중량감소율이 더 높았고, 빛의 세기는 배지의 중량감소와 연관이 있는 것으로 나타났다. 버섯 발생시에는 발생실의 공기순환 팬 속도를 달리하였다. NIFoS 2464 균주는 암배양 80일, 명배양 500 Lux에서 40일, 공기순환 팬 속도 30 rpm에서 가장 높은 생산량을 나타내었다. 120일 동안 배양된 병 배지의 경우, 명배양을 40일간 진행한 배지에서 생산량이 더 높았다. 암배양을 80일간 진행한 배지의 경우 배지 상면으로의 반복적인 살수작업 및 배양실 내의 빛 자극으로 인해 자실체가 발생하였다. 첫 수확 후 배지의 수축으로 인해 배지는 병으로부터 분리되었다. 분리된 플라스틱 병은 버섯 재배에 재사용할 수 있으며 이를 이용하면 플라스틱 폐기물의 양을 줄일 수 있을 것으로 기대된다.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.217-222
• /
• 2011

This study was carried out in order to reduce the amount of underground water which is used in the double layered single span plastic greenhouse for retaining heat. For this research, two plastic green houses of the double layered single span plastic greenhouse were installed. There was equipped of internal small tunnel for keeping warm air in the interior of the house. Then the internal small tunnel for keeping warm air was fitted with PVC duct of 50 cm in diameter filled with subsurface water. The surplus solar energy in the greenhouse was stored in the water in the PVC duct. Four FCUs (Fan Coil Unit), which has the capacity of 8,000 kcal per hour, were installed in the middle of the house, and a circulation motor in heat storage water tank was operated from 10:30 a.m. to 16:00 p.m. in order to circulate water between the water tank and the FCUs. Consequently about 5 degrees celsius could be maintained in the interior of the internal small tunnel for keeping warm air with the external temperature of lower than minus 5 degrees celsius. It appeared that the alteration of an internal temperature of the house was flexible depending on the sunlight during daytime. To prevent the water freezing, mixing antifreezing liquid in the water or operating FCU continuously was needed. Also, in order to use the surplus solar thermal energy on plastic green house of water curtain system efficiently, storing the surplus heat during daytime simultaneously finding a method of using water curtain systematic underground water happened to be important. As a result of this research, when the house's interior temperature is below zero the operation of FCU appeared to be impossible. Considering the amount of water used in the house with water-curtain-heating system is 150~200 ton per day, using the system mentioned in this research showed that reducing the underground water more than 80% in order to maintain the internal temperature as the level of 5 degree celsius at the extreme temperature of minus 5 degrees celsius.

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.151-159
• /
• 2001

This study was performed to investigate the effect of time-dependent creep on the deformation. In the analysis, modified Cam-Clay model was adopted to describe the elastic-plastic behavior of clayey soil. In order to consider effect of creep, the secondary coefficient of consolidation $\alpha$ was supplemented to modified Cam-Clay model. To examine the reliability of the program which is developed in this study, the estimated values by this program were compared with the experimental results. The results of the analysis were in good agreement with the observed values in the field.