• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권1호
• /
• pp.31-39
• /
• 2001

The purpose of this study is to reveal the factors leading to the problem of unilateral condylar fractures and suggest a treatment guideline of treatment for good prognosis in surgical treatment. The factors can be age, sex, fracture site, degree of displacement, posterior occlusion loss, post-operative alteration of condylar head position, post-operative condylar head resorption, and maxillomandibular fixation period. One hundred and eleven patients with unilateral condylar fractures, who were treated by surgical method from 1990 Feb. to 2000 Feb., were studied. Minimum follow-up period was 6 months. The results were as follows ; 1. In the age group of $41{\sim}60$, females had significantly higher complication rate than males, therefore we must be careful about treatment of female in this age group 2. In level I fractures of the mandibular condyle, because there were abundant complications when the patients were treated with fragment removal, conservative treatment is recommended over the surgical approach. 3. There were no differences in the complication rate, in the level II, III fractures. but were severe complications in the cases of patients treated by Dr.Nam's method or fragment removal. Therefore, open reduction and internal fixation is recommended over Dr.Nam's method or fragment removal. 4. In level IV fractures, open reduction and internal fixation is recommended 5. Although there was a higher complication rate depending on the degree of deviation, there was no correlation between the degree of deviation and development of complications in each level of fracture 6. Because the complication rate was higher in cases of condylar resorption, vertical dimension loss, and alteration of condylar head position, we must make an effort to prevent such complications during treatment

• 한국농공학회지
• /
• 제30권4호
• /
• pp.94-108
• /
• 1988

The use of geotextile as reinforcing materials in soil structures has become widespread throughout the world. Geotextile reinforcement has been used in retaining walls, roadbed, embankment stabilization and especially reinforcement of soft foundation, and so on, In the past, however, its design and construction have been performed empirically. In this study, laboratory model tests were carried out in order to investigate the effects of geotextile rein- forcement on vertical and horizontal displacement and other characteristics in soft founda- tions. The experiments were executed in eight treatments ;no geotextile between embank - ment and subsoils, and seven geotextiles with different tensile strength. And such factors as the loading conditions, the tensile strength of geotextiles, the ingredient of geotextiles and the elapsed time were investigate in this study. And the analytical method were executed in order to study the stress and behavior of geotextile - reinforced soil structure by the nonlinear elasto - plastic finite element model. The following conclusions were drawn from this study. 1. Geotextile reinforcement reduced the effects of banking loads on subsoils more effectively with the increase of their tensile strength. 2. As the tensile strength of geotextiles was increase, the rate of the initial vertical disp - lacements of loading plate was reduced inverse proportional to loads, Rowever, the effect of loading was reduced when the loads exceed a certain limits, 3. The effect of reinforcement of nonwoven geotextile was 1.5-4.5 times larger than that of the woven geotextile with equivalent tensile strength. 4. The increased bearing capacity and the reduced settlement are proportioned as the tensile strength of geotextile. 5. The settlement at the long time loading were developed almost all, were completed after 10 days and the additional settlement were not developed since then. 6. The nonlinear elasto - plastic finite element method are accurate to predict the stresses and behayior of geotextile - reinforced soil structures.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.551-561
• /
• 2022

In this paper, the effect of fire conditions according to ISO 834 standard on the behavior of carbon fibre-reinforced plastic (CFRP) reinforced steel beams coated with gypsum-based mortar has been investigated numerically. To study the efficiency of these beams, 3D coupled temperature-displacement finite element analyzes have been conducted. Mechanical and thermal characteristics of three different parts of composite beams, i.e., steel, CFRP plate, and fireproof coating, were considered as a function of temperature. The interaction between steel and CFRP plate has been simulated employing the adhesion model. The effect of temperature, CFRP plate reinforcement, and the fireproof coating thickness on the deformation of the beams have been analyzed. The results showed that within the first 120 min of fire exposure, increasing the thickness of the fireproof coating from 1 mm to 10 mm reduced the maximum temperature of the outer surface of the steel beam from 380℃ to 270℃. This increase in the thickness of the fireproof layer decreased the rate of growth in the temperature of the steel beam by approximately 30%. Besides excellent thermal resistance and gypsum-based mortar, the studied fireproof coating method could provide better fire resistance for steel structures and thus can be applied to building materials.

• Computers and Concrete
• /
• 제7권4호
• /
• pp.365-386
• /
• 2010

This paper presents the physical formulation of a 1D material model suitable for seismic applications. It is written within the framework of thermodynamics with internal variables that is, especially, very efficient for the phenomenological representation of material behaviors at macroscale: those of the representative elementary volume. The model can reproduce the main characteristics observed for concrete, that is nonsymetric loading rate-dependent (viscoelasticity) behavior with appearance of permanent deformations and local hysteresis (continuum plasticity), stiffness degradation (continuum damage), cracking due to displacement localization (discrete plasticity or damage). The parameters have a clear physical meaning and can thus be easily identified. Although this point is not detailed in the paper, this material model is developed to be implemented in a finite element computer program. Therefore, for the benefit of the robustness of the numerical implementation, (i) linear state equations (no local iteration required) are defined whenever possible and (ii) the conditions in which the presented model can enter the generalized standard materials class - whose elements benefit from good global and local stability properties - are clearly established. To illustrate the capabilities of this model - among them for Earthquake Engineering applications - results of some numerical applications are presented.

• 한국전산구조공학회논문집
• /
• 제21권4호
• /
• pp.375-382
• /
• 2008

본 연구는 2차원 및 3차원 동적 탄소성 응력 해석을 위한 특수 적분해 경계요소법의 공식 개발을 제시한다 정적 탄성에 대한 기본식이 일반해를 구하는데 이용되었으며, 전체형상함수 개념을 이용하여, 변위율과 traction rate의 특수 적분해를 구함으로써 지배 방정식의 가속도 부분을 근사화시켰다. 시간 적분을 위하여 Houbolt 시적분 방법을 이용하였으며, Newton-Raphson 알고리즘을 이용하여 수치 연산을 행하였다. 제시된 공식에 따른 예제 해석을 통하여 그 방법의 유효성과 정확성을 설명하였다.

• 한국가스학회지
• /
• 제7권2호
• /
• pp.22-32
• /
• 2003

Al-황동은 기계적 특성 및 열전도성이 우수하고 해수 중에서 표면 보호피막을 형성하므로 부식저항성이 높아 해수를 냉각수로 사용하는 선박용 열교환기의 세관재로 널리 사용되고 있다 Al-황동 세관은 실제 사용 환경에서 굽힘 등에 의한 소성변형된 상태로 사용되는 경우가 많다. 이와 같은 소성변형에 의한 Al-황동 세관의 균열 파손사례는 선박의 오일탱크 내의 가열코일, 각종 열교환기의 세관 등에서 흔히 찾아 볼 수 있다. 또한 세관의 확관에 의한 밀봉 방법에 따라 세관의 변형에 의한 잔류응력 및 어패류 혼입에 의한 해수 유입부의 국부적인 유속증가 등에 기인하여 Al-황동 세관의 균열 및 침식 등의 파손사례가 보고되고있다. 본 연구에서는 $3.5\%$ NaCl. + $0.1\%\;NH_4OH$ 수용액을 시험편 표면에 5 m/s로 액분사하의 가속실험에서 Al-황동 세관의 응력부식균열 거동에 미치는 응력의 영향에 대하여 고찰하였다.

• Earthquakes and Structures
• /
• 제26권1호
• /
• pp.77-86
• /
• 2024

To investigate the seismic performance of steel pipe-aeolian sand recycled concrete columns, this study designed and produced five specimens. Low-cycle repeated load tests were conducted while maintaining a constant axial compression ratio. The experiment aimed to examine the impact of different aeolian sand replacement rates on the seismic performance of these columns. The test results revealed that the mechanical failure modes of the steel pipe-recycled concrete column and the steel pipe-aeolian sand recycled concrete column were similar. Plastic hinges formed and developed at the column foot, and severe local buckling occurred at the bottom of the steel pipe. Interestingly, the bulging height of the damaged steel pipe was reduced for the specimen mixed with an appropriate amount of wind-deposited sand under the same lateral displacement. The hysteresis curves of all five specimens tested were relatively full, with no significant pinching phenomenon observed. Moreover, compared to steel tube-recycled concrete columns, the steel tube-aeolian sand recycled concrete columns exhibited improved seismic energy dissipation capacity and ductility. However, it was noted that as the aeolian sand replacement rate increased, the bearing capacity of the specimen increased first and then decreased. The seismic performance of the specimen was relatively optimal when the aeolian sand replacement rate was 30%. Upon analysis and comparison, the damage analysis model based on stiffness and energy consumption showed good agreement with the test results and proved suitable for evaluating the damage degree of steel pipe-wind-sand recycled concrete structures.

• 한국산학기술학회논문지
• /
• 제19권7호
• /
• pp.305-314
• /
• 2018

강판 콘크리트 합성보는 강판, 콘크리트 및 2가지의 이질 재료를 결합시키는 전단 연결재로 구성되어 있다. 일반적으로 강판은 기존의 합성보에 용접하여 조립된다. 본 연구에서는 전단 연결재를 감소시키고, 작업성을 향상시키기 위해 SPC(Steel Plate Concrete Composite Beam) 보라 불리는 새로운 강판 콘크리트 합성보를 개발했다. SPC 보는 전단 연결재 없이 절곡된 강판과 콘크리트로 구성된다. 절곡된 강판은 용접 대신 고강도 볼트로 조립된다. 또한, 건설 현장에서 작업성을 향상시키기 위해 슬래브와 접합부에 모자 모양의 Cap이 부착된다. 변위 제어 모드에서 2점 가력 실험을 수행하였고, 시편의 휨강도를 계산하기 위해 소성 응력 분포법과 변형률 적합법을 사용하였다. 시험 결과에 따르면 새로운 SPC 보의 휨 강도는 완전 합성보 강도의 76 %의 값이 나왔다. Cap은 스터드와 부속 철물의 역할을 수행한다. 또한, Cap의 간격 제어를 통해 합성율의 증가가 가능하고, SPC 합성보의 합성율을 고려할 경우 변형률 적합법을 통해 SPC 합성보의 휨 성능 평가가 가능하다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권2호
• /
• pp.217-232
• /
• 2000

The author studied on the 128 cases of benign odontogenic tumors which had been diagnosed with biopsy during the period of Jan. 1989 to Dec. 1998 at the Kyungpook National University Hospital, Yeungnam University Medical Center, Keimyung University Dongsan Medical Center, and Taegu Catholic Medical Center. This study contained the clinicostatistical analysis of the frequency in relation to sex, age, locations, chief complaints, duration, radiographic findings, recurrence, teeth, and treatment methods. The results were as follow : 1. Of a total of 128 benign odontogenic tumors, ameloblastomas(57 cases; 44.5%) and odontomas (44 cases ; 34.4%) mostly occupied. The other types of lesions were 8 calcifying odontogenic cysts, 7 benign cementoblastomas, 4 myxomas, 3 adenomatoid odontogenic tumors, 2 calcifying epithelial odontogenic tumors, 2 ameloblastic fibro-odontomas, and 1 odontogenic fibroma. 2. In age and sex distribution, benign odontogenic tumors occured slightly more often in males(53.9%) than females(46.1%) and the majority of cases(79.7%) were found during 2nd, 3rd, and 4th decade. 3. There was a predilection for mandibular lesions(mandible-maxilla ratio, 2.6 : 1). 4. The most common chief complaint was swelling(29.7%) and in respect to duration, the cases less than 1 year(50.0%) mainly appeared. 5. There were 7 cases(13.0%) of recurrence on ameloblastoma and there was no recurrence in the others. 6. In Ameloblastoma It commonly occured during 3rd and 4th decade(59.6%) and mean age was 30.2 years. The majority of cases were occurred in mandible(96.5%) , especially mandibular molar and angle area(71.9%). The most common chief complaint was swelling(47.4%) and in respect to duration, the cases less than 1 year(52.6%) mainly appeared. In relation to teeth, there were resorption of root(52.6%), displacement of teeth(31.6%), and in relation to impacted teeth(43.9%). There was higher recurrence rate in the cases by conservative treatment(14.7%) than radical treatment(10.0%). As regards radiographic findings, conservative treatments were prevalent in the cases of unilocular type(85.7%) as compared with multilocular type(48.5%). and there was higherrecurrence rate in the cases of multilocular type(18.2%) than unilocular type(4.8%). As regards the type of treatment in relation to age, conservative treatments were prevalent in patients younger than 20 years of age. 7. In Odontomas It commonly occured during 2nd decade(50.0%) and in maxillary anterior teeth(40.9%). The most common chief complaint was delayed retention and permanent impaction of teeth(72.7%), and most frequently associated with impacted teeth(79.5%).

• 한국산학기술학회논문지
• /
• 제20권1호
• /
• pp.426-433
• /
• 2019

지진의 2차사고 중 화재 및 가스 폭발에 의한 사고는 아파트형 주거 형태와 대형 복합화 된 건물이 많은 도시 일수록 인명피해의 우려가 커지게 되고, 이를 방지하기 위하여 화재 방호 계통 스프링클러 시스템의 경우 내진 설계가 필수적으로 수행되어야 한다. 하지만 현재 일반적으로 사용하고 있는 화재 방호 계통 스프링클러 시스템 배관은 대부분 스테인리스 계열의 금속 파이프를 사용하고 있고 일부 특수 위치에서 합성수지 계열의 파이프를 사용하고 있어 진동 및 지진 등에 취약한 소재가 적용되고 있다. 이에 본 연구에서는 폴리에틸렌(Polyethylene, 이하 : PE)과 알루미늄(Aluminum, 이하 : Al)의 다층구조 복합관이 보유한 변위 흡수 유연성이 진동 환경과 지진 발생에 대한 내진 성능을 상승 시키는 특성으로 판단하였고, PE-Al-PE 복합관을 기존 스테인리스 관, PE관과 비교하여 내진 성능을 실험 하였다. 내진 특성은 스프링클러 파이프가 전달하는 진동의 양과 범위를 측정하면 진동에 대한 흡수 정도를 알 수 있고 이는 지진에 대하여 대상체가 자체적으로 진동을 감쇠하는 내진 특성 판단의 방법으로 횡 형 진동 측정법으로 발생한 진동의 최초 응답 변위에 대한 대수 감쇠율을 비교하여 파이프의 내진 특성을 확인하였다.