• 한국항공우주학회지
• /
• 제31권3호
• /
• pp.15-22
• /
• 2003

피로균열성장모델을 유도하고 지연모델을 제안하였다. 피로균열성장모델은 피로균열선단의 소성변형으로 인하여 균열표면에 발생하는 잔류소성스트레치를 고려하고 있다. 균열 성장률은 균열선단 재료요소의 소성변형에너지와 누적피로손상으로부터 계산된다. 유도한 균열성장모델로부터 계산한 균열성장률은 AL6061-T651과 17-4PH 주강의 시험결과와 잘 일치하고 있다. 피로균열성장지연모델은 인장과대하중으로부터 생성된 잔류소성스트레치를 근거로 하고 있으며, 인장과대하중은 다음 하중 사이클의 소성변형률을 감소시킨다. Strip-yield모델을 이용하여 균열선단의 소성역을 계산하였다. 새로 제안된 지연모델은 인장과대하중하의 피로균열선장특성 및 지체지연 현상을 잘 기술하고 있다.

• 한국지반공학회논문집
• /
• 제21권7호
• /
• pp.81-89
• /
• 2005

지오텍스타일을 포함하지 않은 토목섬유 경계면의 동적마찰저항과 전단변위속도, 그리고 여타 마찰특성의 상관성에 대한 실험적 연구를 수행하였다 변위속도 조절이 가능한, 진동대를 이용한 진동식 실험장치를 제작하여 사용하였다. 다양한 변위속도를 포함한 실험을 수행한 결과, 지오텍스타일을 포함하지 않은 토목섬유 경계면은 지오텍스타일을 포함한 토목섬유 경계면의 전단특성과 확연히 구별되는 거동을 보였다. 지오텍스타일을 포함한 토목섬유 경계면과 달리 지오텍스타일을 포함하지 않은 토목섬유 경계면의 전단 거동은 전단 변위 속도에 민감하지 않으며 강-완전소성에 근사하다는 결론을 얻었다.

• Archives of Plastic Surgery
• /
• 제41권5호
• /
• pp.493-499
• /
• 2014

Background Maintaining stability and restoring the aesthetic appearance are the fundamental goals when managing zygomatic fractures. We aimed to evaluate the stability and anthropometric outcomes of zygomatic fracture patients who underwent two-point fixation involving the infraorbital rim and zygomaticomaxillary buttress via the transconjunctival and gingivobuccal approaches without any skin incisions. Methods We examined 15 zygomatic fracture patients who underwent two-point fixation during a 3-year period. Stability was evaluated using three-dimensional facial bone computed tomography. Superoinferior and anteroposterior displacement of the zygoma was quantified. The aesthetic appearance of the periorbital region was evaluated using indirect anthropometry with standardized clinical photographs. The ratios between the eye fissure height and width, and lower iris coverage ratio were used to evaluate aesthetical changes. The bony displacement and aesthetic ratios were analyzed using Wilcoxon or Friedman tests. The correlation between the preoperative zygoma position and anthropometric values was analyzed. Results The positions of the zygoma were similar to those on the contralateral side at the long-term follow-up. The preoperative anthropometric measurements on the fractured side differed from those on the contralateral side, although these values were close to the normal values at the long-term follow-up. Furthermore, we noted that the anteroposterior displacement strongly positively correlated with the lower iris coverage rate (Spearman's coefficient=0.678, P=0.005). Conclusions Two-point fixation of zygomatic fractures achieved stable outcomes on long-term follow-up, and also appeared to be reliable in restoring the aesthetic appearance of the periorbital region.

• Journal of Welding and Joining
• /
• 제7권1호
• /
• pp.42-50
• /
• 1989

The application of fracture mechanics is being increased gradually to assess the safety of welded structures containing crack. Fatigue crack propagation behavior and elastic-plastic fracture toughness J$_{IC}$ of home made flux cored wire(1.22mm) CO$_{2}$ weldments was discussed. Especially fatigue crack propagation test was carried out by .DELTA.K control instead of load control and elastic-plastic fracture toughness J$_{IC}$ was obtained by ASTM-R curve method on C.T.specimen in transverse direction of weldments. The results obtained are as follows; (1) Weld metal presented an almost complete similarity to base metal on fatigue crack propagation rate in transverse direction. (2) Weld metal was more than base metal on J$_{IC}$ value in transverse direction. (3) F.C.W. CO$_{2}$ weldments had an excellent characteristic of fatigue crack propagation rate and J$_{IC}$ in less than 50kg/mm$^{2}$ steel grade, this would result from that weld metal had good static strength.trength.

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.29-50
• /
• 2015

With a quasi-three point bending apparatus, ratcheting deformation is studied experimentally on a pressurized austenitic stainless steel Z2CND18.12N pipe under bending load and vertical displacement control, respectively. The characteristic of ratcheting behavior of straight pipe under both control methods is achieved and compared. The cyclic bending loading and internal pressure influence ratcheting behavior of pressurized straight pipe significantly under loading control and the ratcheting characteristics are also highly associated with the cyclic displacement and internal pressure under displacement control. They all affect not only the saturation of the ratcheting strain but the ratcheting strain rate. In addition, ratcheting simulation is performed by elastic-plastic finite element analysis with ANSYS in which the bilinear model, Chaboche model, Ohno-Wang model and modified Ohno-Wang model are applied. By comparison with the experimental data, it is found that the CJK model gives reasonable simulation. Ratcheting boundaries under two control modes are almost same.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.940-950
• /
• 2010

In case of uneven surcharge like backfill or embankment after constructing caisson applied on the deep soft marine deposits, lateral deformation of soft soils would happen due to plastic deformation of soil particles by increase of excess pore water pressure. Lateral deformation of soil will result in the caisson displacement which affects soft soil-caisson structure safety. Soft soil was improved by soil compaction pile method, and then gravity caisson was installed. Soil deformations were monitored and analyzed with step by step backfill and embankment behind the caisson. Amount and speed of lateral deformation after the installation of caissons were closely related with the time of backfill and embankment. The relationship between maximum lateral displacement($\Delta_y$) in front of caisson and settlement($\Delta_s$) can be expressed as $\Delta_y=(0.0871)\Delta_s+122.95$. Soft soil depth did not affect the lateral displacement of caisson in this study, which can be explained the soft soil improvement under the caisson by S.C.P. method. Substantially the amount and speed of the lateral deformation of caisson were closely related with the uneven surcharging rate behind caisson.

• Archives of Plastic Surgery
• /
• 제34권6호
• /
• pp.785-791
• /
• 2007

Purpose: Paraffin has been used to augment depressed nasal contour for many years by illegally. Reported complications of nasal paraffinoma were skin thinning, displacement of nasal profile, redness, chronic inflammation and malignant change to skin cancer. The current authors report results of the secondary rhinoplasty after excision of nasal paraffinoma. Methods: Through the open rhinoplasty incision, paraffinoma was removed under direct vision. Saline irrigation and meticulous hemostasis were performed. Simultaneously, the secondary depressed nasal deformity was corrected with autogenous dermofat graft harvested from inferior gluteal fold. The dermofat was fixed to the nasofrontal area with bolster suture, and the interdormal area of the tip. Results: A total of 13 patients underwent secondary augmentation with autogenous dermofat graft after removal of paraffinoma from 2000 to 2004. The mean follow-up period was 15 months. There were no postoperative complications. All patients were satisfied with their surgical results. However, there were 10 to 20 percent resorption of the grafted dermofat. Conclusion: It is suggest that autogenous dermofat be one of good materials for the correction of the secondary deformity after removal of nasal paraffinoma. In addition, autogenous dermofat graft presented easy harvesting and manipulation for transfer, high survival rate by firm fixation to the recipient site and stable surgical results.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.178-188
• /
• 1999

충격하중을 받는 시험편 높이의 1/4 길이의 notch를 가진 3점 굽힘시험편들의 기계적 거동에 관한 컴퓨터 시뮬레이션을 하고 이 시뮬레이션에 대한 실험적 검증도 하여 그 타당성을 입증하였다. 시험편들의 양쪽 가장자리(지지점)에서 작용되어지는 여러 가지의 하중속도에 대한 경우들과 탄소성 von Mises 재질인 모델들을 시뮬레이션에 포함시켰으며 이들에 대한 결과들을 간극 개구 변위, 반력, 크랙선단 개구 변위 및 변형률등이 속도에 의존되는 재질(점소성 재질)에 대한 시뮬레이션 결과와 비교하였다. 또한 여러가지의 동적 하중을 받는 상황하에서의 안정성이 본 연구의 시뮬레이션을 통하여 비교되었으며 그 차이점들이 규명되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.366-369
• /
• 1999

관골 골절을 분류할 때 주위의 해부학적인 구조물과 연관해서 기능적인 면에 중점을 두어야 하므로 복시나 내안증같은 합병증이 나타날 수 있는 안와골절을 포함하는 분류를 해야한다. 관골 골절의 변위에 따라 나타나는 합병증의 양상이 매우 다양하므로 진단에 도움이 될 수 있도록 지속적인 연구가 필요할 것으로 사료되며, 초창기에 이러한 임상적인 합병증이 나타나지 않더라도 추후에 발생할 가능성이 있기 때문에 이를 간과해서는 안될 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.519-527
• /
• 1997

AISI 316 steel has been used extensively for heater and boiler tube of the structural plants such as power, chemical and petroleum plants under severe operating conditions. Usually, material degradation due to microcrack or precipitation of carbides and segregation of impurity elements, is occured by damage accumulated for long-term service at high temperature in this material. In this study, the effect of aging time on fracture toughness was investigated to evaluate the measurement of material degradation. The elastic-plastic fracture toughness behaviour of AISI 316 steel pipe aged at $550^{\circ}C$for 1h-10000h (the aged material) was characterized using the single specimen J-R curve technique and eletric potential drop method at normal loading rate(load-line displacement speed of 0.2mm/min) in room temperature and air environment. The fracture toughness data from above experiments is compared with the $J_{in}$ obtained from predicted values of crack initiation point using potential drop method.