• 한국수산과학회지
• /
• 제36권2호
• /
• pp.157-162
• /
• 2003

Ultrastructure of germ cell during gametogenesis of surf clam, Spisula sachalinensis were investigated by electron microscopic observations. Oogonia are oval in shape and 5-6 ${\mu}m$ in diameter. They contain a large nucleus and have several mitochondria in the cytoplasm. Vitellogenic oocytes grew attached by a stalk to the germinal epithelium in the ovarian sac and their cytoplasm contained many yolk granules, lipid granules and mitochondria. Mature oocytes measuring 50-60 ${\mu}m$ in diameter have a nucleus containing an electron dense nucleolus, and a lots of yolk granules, lipid granules, mitochondria, rough endoplasmic reticulum and cortical granules were present in the cytoplasm. The surface of the plasma membrane in mature oocytes was formed of microvilli approximately 1.5 ${\mu}m$ long and enveloped in the vitelline layer. Spematogonia are oval in shape and about 5 ${\mu}m$ in diameter. Sprmatogonia develop into spermatocyte, spermatid and spermatozoon. The spermatozoon consisted of the head, midpiece and tail. The sperm head with diameter of about 1.5 ${\mu}m$ was ovoid, and contained the nucleus which consisted of acrosome. The four mitochondria encircled the centrosome in midpiece. The flagellum measuring about 40 ${\mu}m$ long had the classical 9+2 axoneme structure.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.88-96
• /
• 1996

The characteristic analysis of fly ash generated from a fired power plant using bunker-C oil has been investigated. Ash size distribution by an optical microscopy with image processing technique, morphological shape by a scanning electron microscope(SEM) and microscope, chemical composition by the inductively coupled plasma emission spectrometry(ICP), and resistivity measurement as a function of temperature and moisture content by the resistivity meter are performed. A study of physical, chemical and electrical characteristics of bunker-C fly ash plays an important role of improving the performance of an electrostatic precipitator and protecting air pollution. The samples of bunker-C fly ash for analysis were collected from the electrostatic precipitator hopper of Ulsan Power Plant Unit 1 and Pusan Power Plant Unit 1. Mass median diameter(MMD) of bunker-C fly ash was measured 12.7${\mu}{\textrm}{m}$, while MMD of fly ash generated from the mixture of bunker-C oil(40%) and domestic anthracitic coal(60%) was 25.7${\mu}{\textrm}{m}$. The morphological structure of bunker-C fly ash consisted of fine particles of non-spherical shape. The primary chemical components of bunker-C fly ash were composed of SiO2(2.36%), Al2O3(4.91%), Fe2O3(14.33%) and C(11.84%). Resistivity of bunker-C fly ash was found to be increased with increasing temperature at the range of 100~15$0^{\circ}C$ and was measured 103~104 ohm-cm.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.105-110
• /
• 2020

Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.356-356
• /
• 2007

Plasma immersion ion beam deposition (PIIBD) technique is a cost-effective process for the deposition of diamond like carbon thin film, the possible solid lubricant on large surface and a complex shape. We used PIIB process for the preparation of DLC thin film on $Al_2O_3$ with deposition conditions of deposition temperature range $200^{\circ}C$, working gas pressure of 1.310-1Pa. DLC thin films were coated by $C_2H_2$ ion beam deposition on $Al_2O_3$ after the ion bombardment of SiH4 as the bonding layer. Energetic bombardment of $C_2H_2$ ions during the DLC deposition to ceramic materials generated mixed layers at the DLC-Si interface which enhanced the interface to be highly bonded. Wear test showed that the low coefficient of friction of around 0.05 with normal load 2.9N and proved the advantage of the low energy ion bombardment in PIIBD process which improved the tribological properties of DLC thin film coated alumina ceramic. Furthermore, PIIBD was recognized as a useful surface modification technique for the deposition of DLC thin film on the irregular shape components, such as molds, and for the improvement of wear and adhesion problems of the DLC thin film, high temperature solid lubricant.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.612-619
• /
• 2002

The dynamic behavior of Al-Mg alloys plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser irradiation. The keyhole fluctuated both in size and shape and its fluctuation period was about 440 ${\mu}{\textrm}{m}$. This instability has been estimated to be caused by the evaporation phenomena of metals with different boiling point and latent heats of vaporization. Therefore, the authors have conducted the spectroscopic diagnostics of plasma induced in the pulsed YAG laser welding of Al-Mg alloys in air and argon atmospheres. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg line, as well as strong molecular spectrum of AlO, MgO and AIH. It was confirmed that the resonant lines of Al and Mg were strongly self-absorbed, in particular in the vicinity of pool surface. The self-absorption of atomic Mg line was more eminent in alloys containing higher Mg. These facts showed that the laser-induced plasma was relatively a low temperature and high density metallic vapor. The intensities of molecular spectra of AlO and MgO were different each other depending on the power density of laser beam. Under the low power density irradiation condition, the MgO band spectra were predominant in intensity, while the AlO spectra became much stronger in higher power density. In argon atmosphere the band spectra of MgO and AlO completely vanished, but AlH molecular spectra was detected clearly. The hydrogen source was presumably the hydrogen solved in the base Metal, absorbed water on the surface oxide layer or H$_2$ and $H_2O$ in the shielding gas. The temporal change in spectral line intensities was quite similar to the fluctuation of keyhole. The time average plasma temperature at 1 mm high above the surface of A5083 alloy was determined by the Boltzmann plot method of atomic Cr lines of different excitation energy. The obtained electron temperature was 3, 280$\pm$150 K which was about 500 K higher than the boiling point of pure aluminum. The electron number density was determined by measuring the relative intensities of the spectra1lines of atomic and singly ionized Magnesium, and the obtained value was 1.85 x 1019 1/㎥.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.250-258
• /
• 2014

Due to recent industrial growth and development, there has been a high demand for light and highly durable materials. Therefore, a variety of new materials has been developed. These new materials include carbon fiber reinforced plastic (CFRP or CRP), which is a wear-, fatigue-, heat-, and corrosion-resistant material. Because of its advantageous properties, CFRP is widely used in diverse fields including sporting goods, electronic parts, and medical supplies, as well as aerospace, automobile, and ship materials. However, this new material has several problems, such as delamination around the inlet and outlet holes at drilling, fiber separation, and tearing on the drilled surface. Moreover, drill chips having a fine particulate shape are harmful to the work environment and engineers' health. In fact, they deeply penetrate into machine tools, causing the reduction of lifespan and performance degradation. In this study, CFRP woven and unidirectional prepregs were formed at $45^{\circ}$ and $90^{\circ}$, respectively, in terms of orientation angle. Using a high-speed steel drill and a TiAIN-coated drill, the two materials were tested in three categories: cutting force with respect to RPM and feed speed; shape changes around the input and outlet holes; and the shape of drill chips.

• Applied Microscopy
• /
• 제15권2호
• /
• pp.10-18
• /
• 1985

The posterior hypothalamus of the hibernating greater horseshoe bats (Rhinolophus ferrumequinum korai Kuroda) were observed with an electron microscope. The posterior hypothalamus is known to be closely related to the reflex responses activated by cold, and the following observations were obtained in the cellular type of nerve cells: there are three types of neurons in the posterior hypothalamus. 1. The first type of neuron was the largest, ovoid or conical in shape, the nucleus was elliptic and the nuclear envelope had many deep invaginations. The cell organelles were well developed, in particular there was an abundance of variously shaped mitochondria, and the Golgi complex and the polysomes were observed in the cytoplasm. 2. The second type of neuron was moderate in size, ovoid or elliptic in shape, the nucleus was located nearer to the plasma membrane and the nuclear envelope had. a few invaginations. The cytoplasm was rich in amount compared with that of the third type of neuron, and the cell organelles, especially the rough endoplasmic reticulum were well developed. Also lipofuscin pigments were observed. 3. The third type of neuron was the smallest in size and round in shape. The nucleus and the nucleolus were observed in the central portion of the cell body and the nuclear envelope had a few invaginations. The cytoplasm was small compared with those of the first and second types, but the rough endoplasmic reticulum, the mitechondria and the polysomes were relatively well developed. The cytoplasm was characterized by the presence of membrane-bound small bodies with a single membrane containing a fine particular substance around the rough endoplasmic reticulum and the Golgi complexes.

• 유기물자원화
• /
• 제32권1호
• /
• pp.31-38
• /
• 2024

본 연구에서는 환경오염의 원인인 폐비닐을 전기방사를 통해 재활용하여 에너지 저장매체에 쓰이는 분리막으로 응용하고자 하였다. 상세히는, 폐비닐은 고분자 용액으로 만들어 전기방사 하여 비닐 폐기물 기반 분리막(VWS)를 얻은 후, 플라즈마 처리를 통해 분리막의 젖음성을 향상시켰다. FE-SEM 분석을 통해 비닐 폐기물의 농도에 따른 VWS의 형상과 두께가 달라지는 것을 확인하였다. 또한, 플라즈마 세기를 80-120W 범위로 처리하여 VWS의 젖음성을 향상시켰다. 상세히는, 플라즈마 세기를 100W로 인가하였을 때 가장 낮은 접촉각이 관찰되었으며, 전기화학 성능은 57.9F g^-1로 가장 높은 비용량을 보인다. 이는 전기방사로 달성한 높은 기공도 뿐만 아니라 산소 플라즈마 처리로 도입된 친수성 작용기에 기인한다. 결론적으로, 환경오염을 유발하는 폐비닐을 전기방사와 상압 산소 플라즈마 처리를 통해 에너지 저장매체의 분리막 소재로 활용할 수 있는 가능성을 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.453-458
• /
• 2001

Analysis of radiation heating system for producing 60" size PDP panels was carried out using $RADCAD^{TM}$ software. Optimum arrangement of infrared heating elements was found to obtain uniform temperature distribution in PDP panel during heating. Heating capacity of each heater was determined to obtain an appropriate maximum panel temperature. Parametric study to find the effect of design parameters such as the thermophysical and optical properties of glass and cooling system was carried out. As a reference system, about 35 kW heating capacity was chosen to obtain about 800 K maximum panel temperature after 30 minute heating. The maximum temperature difference in panel was below 20 K. The maximum/minimum and its difference in the panel were very sensitive to the variation of the emissivity of glass and cooling block.

• 한국대기환경학회지
• /
• 제19권3호
• /
• pp.315-323
• /
• 2003

The goal of this study if the optimization of discharge electrode for pulsed corona discharge reactor located in thermal power plant. For this purpose, we have performed experiments of NO$_{x}$ removal rate by exchange of discharge electrode diameter and arrangement of discharge electrode in the non -thermal plasma reaction facility using a ethylene as additive. If the diameter and numbers of discharge electrode were larger, the NO$_{x}$ removal rate was higher. From these results, if we optimized the shape and installed numbers of discharge electrode at the pilot plant, we could increase the NO$_{x}$ removal rate with less amount of additive than current amount.mount.