• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.333-333
• /
• 2011

We have investigated the breakdown properties in liquids by high voltage pulse system. High voltage pulse power system is consisted of the Marx-generator with two capacitors (0.5 ${\mu}F$, withstanding voltage is 40 kV), to which the charging voltage can be applied to maximum 30 kV DC, spark gap switch and charging resistor of 20 $M{\Omega}$. We have made use of tungsten pin electrodes of anode-cathode (A-K), which are immersed into the liquids. The breakdown voltage and current signals are measured by high voltage probe (Tektronix P6015A) and current monitor (IPC CM-1.S). Especially the high speed breakdown or plasma propagation characteristics in the pulsed A-K gap have been investigated by using the high speed ICCD camera. We have measured the electron temperature through the Boltzmann plot method from the breakdown spectrums. Here the A-K gap has been changed by 1 mm, 2 mm, and 3 mm. The used liquids are distilled water and solution of salt (0.9 %). The output voltage and current signals at breakdown in distilled water are shown to be bigger than those in saline solution. The breakdown voltage and current characteristics in liquids will be discussed in accordance with A-K gap distances. It is also found that the electron temperatures and plasma densities in liquids are decreased in conformity with A-K gap.

• Journal of Astronomy and Space Sciences
• /
• 제37권2호
• /
• pp.85-94
• /
• 2020

Equatorial noise, also known magnetosonic waves (MSWs), are one of the frequently observed plasma waves in Earth's inner magnetosphere. Observations have shown that wave amplitudes maximize at the magnetic equator with a narrow extent in their latitudinal distribution. It has been understood that waves are generated from an equatorial source region and confined within a few degrees magnetic latitude. The present study investigates whether the MSW instability and saturation amplitudes maximize at the equator, given an energetic proton ring-like distribution derived from an observed wave event, and using linear instability analysis and particle-in-cell simulations with the plasma conditions at different latitudes along the dipole magnetic field line. The results show that waves initially grow fastest (i.e., with the largest growth rate) at high latitude (20°-25°), but consistent with observations, their saturation amplitudes maximize within ±10° latitude. On the other hand, the slope of the saturation amplitudes versus latitude revealed in the present study is not as steep as what the previous statistical observation results suggest. This may be indicative of some other factors not considered in the present analyses at play, such as background magnetic field and plasma inhomogeneities and the propagation effect.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.593-602
• /
• 1999

This paper presents combustion characteristics of LPG-air mixture ignited by the plasma jet in a cylindrical vessel with constant volume, in which our focus is placed on the multi-hole plug configuration. Four types of the plug configuration depending on the number of orifice and the arranged angle are considered, along with two cases of conventional spark ignition for comparison. Not only the flame propagation is photographed at intervals, but the pressure in the combustion chamber is also recorded through the entire combustion process. The results show that the plasma jet ignition enhances the overall combustion rate remarkably in comparison to the spark ignition by generating irregular flame front and penetrating through the unburned mixture. The combustion enhancement rate agrees favorably with the available data, which supports the validity of our experiment. Synthetically estimating, the two-hole sixty-degree plug appears to be the most desirable, in that the maximum pressure as well as the combustion duration is less affected by the sub-energy level than the others. It is also deduced that there may exist an optimal plug configuration capable of rapid combustion for a specific combustion chamber.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.560-566
• /
• 2015

The self-consistent simulation based on the drift-diffusion approximation with anisotropic transport coefficients was performed. The RHCP-wave propagation was observed in MICP and this wave was refracted toward the high-density region. The calculated impedance seen from the antenna terminal shows that resistance component of MICP is a higher than that of ordinary ICP. Because of a higher resistance, the power transfer efficiency was improved to 95%. This property is practically important for large-size, low-pressure plasma sources because high resistance corresponds to high power-transfer efficiency and stable impedance matching characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3279-3281
• /
• 1999

This paper describes a method of direct wafer bonding using surfaces activated by a radio-frequency hydrogen plasma. The hydrogen plasma cleaning of silicon in the RIE mode was investigated as a pretreatment for silicon direct bonding. The cleaned silicon surface was successfully terminated by hydrogen, The hydrogen-terminated surfaces were rendered hydrophilic, which could be wetted by Dl water rinse. Two wafers of silicon and silicon dioxide were contacted to each other at room temperature and postannealed at $300{\sim}1100^{\circ}C$ in an $N_2$ atmosphere for 2 h. From the AFM results, it was revealed that the surface became rougher with the increased plasma exposure time and power. The effect of the plasma treatment on the surface chemistry was investigated by the AES analysis. It was shown that the carbon contamination at the surface could be reduced below 5 at %. The interfacial energy measured by the crack propagation method was 122 $mJ/m^2$ and 384 $mJ/m^2$ for RCA cleaning and hydrogen plasm, respectively.

• Journal of Astronomy and Space Sciences
• /
• 제39권2호
• /
• pp.35-42
• /
• 2022

During their respective missions, the spacecraft Voyager and Cassini measured several Saturn magnetosphere parameters at different radial distances. As a result of information gathered throughout the journey, Voyager 1 discovered hot and cold electron distribution components, number density, and energy in the 6-18 Rs range. Observations made by Voyager of intensity fluctuations in the 20-30 keV range show electrons are situated in the resonance spectrum's high energy tail. Plasma waves in the magnetosphere can be used to locate Saturn's inner magnetosphere's plasma clusters, which are controlled by Saturn's spin. Electromagnetic electron cyclotron (EMEC) wave ring distribution function has been investigated. Kinetic and linear approaches have been used to study electromagnetic cyclotron (EMEC) wave propagation. EMEC waves' stability can be assessed by analyzing the dispersion relation's effect on the ring distribution function. The primary goal of this study is to determine the impact of the magnetosphere parameters which is observed by Cassini. The magnetosphere of Saturn has also been observed. When the plasma parameters are increased as the distribution index, the growth/damping rate increases until the magnetic field model affects the magnetic field at equator, as can be seen in the graphs. We discuss the outputs of our model in the context of measurements made in situ by the Cassini spacecraft.

• Composites Research
• /
• 제16권4호
• /
• pp.74-79
• /
• 2003

Micromechanical 시험법과 음향방출을 이용하여 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면물성과 미세파괴메카니즘을 고찰하여 상호 비교하였다. 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면전단강도와 접착일은 극성 작용기의 도입으로 향상 시킬 수 있었다. 임계표면장력과 총 표면자유에너지 중 극성 표면자유에너지는 플라즈마 처리된 Kevlar 섬유에서 가장 컸으며. 미처리된 PBO의 섬유의 경우에서 가장 작았다. Microfibril 파단 형상은 산소 플라즈마 처리된 Keviar 섬유의 경우에서는 명확하게 관찰 되었으며. 미처리와 비교차여 microfibril 파단이 대각선 방향으로 연속적해서 일어나 가장 많은 섬유 파단 신호가 감지되었다 비파괴 음향방출법을 이용하여 얻은 섬유파단 감지 결과는 microdroplet과 두 섬유강화 복합재료 시험법에서 광학현미경을 이용하여 관찰한 미세파단 형상과 상호 일치하였다.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.63-69
• /
• 2018

This work demonstrates attenuation effects of plasma on waves propagating in the 26.5-40 GHz range. The effect is investigated via experiments measuring the transmission between two Ka-band horn antennas set 30 cm apart. A dielectric-barrier-discharge (DBD) plasma generator with a size of $200mm{\times}100mm{\times}70mm$ and consisting of 20 layers of electrodes is placed between the two antennas. The DBD generator is placed in a $400mm{\times}300mm{\times}400mm$ acrylic chamber so that the experiments can be performed for plasma generated under various conditions of gas and pressure, for instance, in air, Ar, and He environments at 0.001, 0.05, and 1 atm of pressure. Attenuation is calculated by the difference in the transmission level, with and without plasma, which is generated with a bias voltage of 20 kV in the 0.1-1.4 kHz range. Results show that the attenuation varies from 0.05 dB/m to 9.0 dB/m depending on the environment. Noble gas environments show higher levels of attenuation than air, and He is lossier than Ar. In all gas environments, attenuation increases as pressure increases. Finally, electromagnetic models of plasmas generated in various conditions are provided.

• 한국전자파학회논문지
• /
• 제20권3호
• /
• pp.303-312
• /
• 2009

본 연구에서는 초고주파를 사용하여 플라즈마 가시광을 발생시키기 위한 전계 집속형 도파관 시스템을 제안하였다. 이 시스템은 초고주파 전력 공급기인 마그네트론, 전력 전송을 위한 도파관부 및 메쉬형 공동으로 이루어진 반응기로 구성된다. 소량의 황 분말과 버퍼 가스인 Ar이 봉입된 석영 벌브를 반응기 내에 위치시키고, 강한 전계를 집속시킴으로써 황 플라즈마가 생성 및 여기되도록 하였다. 즉, 도파관과 반응기의 내벽에 각각 도체팁을 장착시키고, 그 사이에 플라즈마 벌브를 위치시킴으로써 벌브에 강한 전계가 집중되도록 하였다. 또한 플라즈마 생성 과도기에서, 플라즈마의 전기적 도전성 변화에 따른 정합 특성의 열화를 최소화할 수 있는 도파관부를 설계하여 안정적으로 동작되도록 하였다. 최종적으로 2.45 GHz 알루미늄 도파관 시스템을 제작하고, 400W급 마그네트론을 사용한 가시광 방출 실험을 통해 설계된 시스템의 타당성을 검증하였다.

• 한국진공학회지
• /
• 제20권2호
• /
• pp.114-126
• /
• 2011

냉음극 형광램프의 길이 방향의 발광에 의한 광의 전파를 관측하였다. 직류 및 교류 전압을 인가하여 램프 길이의 일정한 간격으로 광 신호를 측정하였다. 직류 전원을 맥류로 변조한 전압을 인가하여 광 신호를 관측한 결과 교류 전원의 광 신호와 마찬가지로 램프 길이 방향으로 발광의 전파가 분명히 나타난다. 이들 광 신호로부터 램프의 발광이 고전압부에서 접지부로 전파한다는 것을 보여준다. 광 신호의 전파는 타운젠드 방전 전후로 두 가지의 형태로 나타난다. 저 전류 영역에서는 광 신호가 감쇄하여 전파되며, 전파 속도는 약 $10^4{\sim}10^5m/s$이다. 정상 글로우 방전에서는 광 신호의 감쇄 없이 전파 속도는 약 $10^5{\sim}10^6m/s$이다.