• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.424-424
• /
• 2013

Ce3+, Sm3+, Eu3+, Tb3+ 등 희토류를 도핑한 여러 종류의 형광체는 백색 LED (white light-emitting diode), 전계방출표시소자(field emission display), 플라즈마디스플레이패널(plasma display panel), 약물 운송(drug delivery) 등 다양한 분야에서 응용되고 있다. 최근에는 졸-겔 방법(sol-gel method)을 이용하여Y2SiO5, Y3-XGdxAl5O12, SrAl2O4 등 여러 종류의 호스트 물질을 합성하여 형광체의 특성을 분석하는 연구가 활발히 진행되고 있다. 이러한 졸-겔 방법은 비교적 낮은 온도에서 간단한 공정으로 좋은 균질성과 높은 생산성을 갖도록 형광체를 제작할 수 있는 장점을 가지고 있다. 이에 본 연구에서는 졸-겔 방법을 이용하여 BaGd2TiO13구조를 제작하였고, 이러한 구조적, 광학적 특성을 분석하기 위하여 열분석기(thermal analyzer), 전계방출형주사전자현미경(field emission scanning electron microscopy), 투과전자현미경(field emission transmission electron microscopy)을 이용하였다. 이러한 졸-겔 방법을 이용하여 제작한 BaGd2TiO13 구조의 형광체 적용 연구를 통한 디스플레이 및 백색 LED 응용에 유용할 것으로 기대된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.320-323
• /
• 2007

The vacuum sealing method is adopted to minimize the residual impurity gas by enhancing a base vacuum level, and the resultant changes in the reset, address, and sustain discharge characteristics, such as a firing voltage, IR emission, and ICCD image, were examined in comparison with the conventional sealing method in the 42-in. AC-PDP. In the PDP cells fabricated by the vacuum sealing method, the ICCD observation illustrates that the discharge is initiated and extinguished very fast and its IR emission intensity is high.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.878-885
• /
• 2012

A new sustainer with primary-side integration of DC/DC converters and energy recovery(SPIDER) circuits is proposed. The proposed circuit operates as a DC-DC converter during address period and energy recovery circuit during sustain period. Therefore, the conventional three electronic circuits composed of the power supply, X-driver, and Y-driver can be reduced to one circuit. As a result, it has desirable advantages such as a simple structure, less mass, fewer devices and cost reduction. Moreover, since the Zero Voltage Switching (ZVS) of all power switches can be guaranteed, a switching loss can be considerably decreased. To confirm the operation, validity, and features of the proposed circuit, experimental results from a prototype for 42-inch PDP are presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.95-98
• /
• 2003

Tin doped indium oxide(ITO) films, which is widely used as a transparent conductor in optoelectronic devices such as solar cell, liquid crystal display, plasma display panel, thermal heater, and other sensors, were prepared by using the capacitively coupled DC magnetron sputtering method. The influence of the substrate temperature, working gas pressure and deposition time on the electrical, optical and morphological properties were investigated experimentally. ITO films with the optimum growth conditions showed resistivity of $2.36{\times}10^{-4}(\Omega}-cm$ and transmittance of 86.28% for a film 680nm thick in the wavelength range of the visible spectrum.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.267-269
• /
• 1994

Various types of plasma display panels(PDPs) have been developed to realize the flat panel display device. But, many of its characteristics must be improved before it can be commercialized. In order to investigate tile characteristics of micro discharge in a PDP ceil, we have constructed a micro-gap discharge system whose electrode gap can be adjustable between $100-1000{\mu}m$ within $0.1{\mu}m$ accuracy. We measured the minimum sustain voltage, current, delay time of discharge while changing parameters(electrode gap distance, electrode surface area, pressure) which influence discharge characteristics.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.482-489
• /
• 1999

AC PDP(P1asma Display Pane1)s use the mixture of inert gases to generate a discharge inside the display pixels. Impurities such as CO, $CO_2$ and OH inside discharge region may deteriorate the characteristics of PDP operation during long life time of PDP. Electro-negative gas such as CO can cause the sustain pulse amplitude to rise by attaching electrons which will play an important role in the earlier stage of the discharge. MgO film is used to protect the dielectric layer in AC PDP, and is in contact with the free space of display pixel where it is filled with the inert gas mixture. So, MgO film can be a main source of impurities. In this experiment, we observed the change of impurity generation of various MgO films which were deposited by different methods, by using QMS. (quadropole mass spectrometer) The main impurites were $H_2$, CO and $CO_2$. And with the comparison of the TPD (temperature programmed desorption) result, it can be understood that impurity gases are generated by sputtering of MgO surface not by outgassing. Deposition method had effects on the characteristics of the impurity generation. The MgO film manufactured by e-beam evaporation generated more amount of impurity gases than the MgO films manufactured by sputtering or ion-plating. And also heat treatment of MgO film after deposition decreased the magnitude of impurity gas generation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.823-827
• /
• 2005

Barrier ribs in the plasma display panel (PDP) function to maintain the discharge space between the glass plates as well as to prevent optical crosstalk. Patterning of barrier ribs is one of unique processes for making PDP. Barrier ribs could be formed by screen-printing, sand blasting, etching, and photolithographic process. In this work photosensitive barrier rib pastes were prepared by incorporating binder polymer, solvent, functional monomers photoinitiator, and barrier rib powder of which surface was treated with fumed silica particles. Studies on the function of materials for the barrier rib paste were undertaken. After optimization of paste formulation and photolithographic process, it was applied to the photosensitive barrier rib green sheet and was found that photolithographic patterning of barrier ribs could be formed with good resolution up to $110{\mu}m$ height and $60{\mu}m$ width after sintering.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.243-250
• /
• 2012

In this study, we attempted to reduce firing voltage of AC-PDP by alloying MgO protective Layer with CaO. Also, spray coating of single crystal MgO powder has been used to improving Exo-electron emission characteristics and reducing the statistical discharge delay in plasma displays. The properties of discharge depending upon the single crystal MgO powder are investigated. Plasma display having powder coated MgCaO Protective Layer shows lower driving voltage and higher efficacy than of uncoated, conventional panel.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.755-760
• /
• 2003

A novel current-fed energy-recovery sustaining driver (CFERSD) for a PDP is proposed in this paper. Its main idea is to recover the energy stored in the PDP or to inject the input source energy to the PDP by using the current source built-up in the energy recovery inductor. This method provides zero-voltage-switching (ZVS) of all main power switches, the reduction of EMI, and more improved operational voltage margins with the aid of the discharge current compensation. In addition, since the current flowing through the energy recovery inductor can compensate the plasma discharge current flowing through the conducting power switches, the current stress through all main power switches can be considerably reduced. Furthermore, it features a low conduction loss and fast transient time. Operations, features and design considerations are presented and verified experimentally on a 1020X106mm sized PDP, 50kHz-switching frequency, and sustaining voltage 140V based prototype.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.541-544
• /
• 2002

The reflective liquid crystal(LC) imager in one panel Liquid Crystal on Silicon(LCoS) System must have the properties such as fast response time, high contrast ratio(C/R) and voltage holding ratio(VHR) which are more related to the lifetime of imager than the others. As the high-output light including a short wavelength from UHP lamp is exposed to LCoS imager, the indium metal impurities, which decrease the C/R and VHR, are diffused from ITO thin film on glass. To ensure the high reliable LCoS imager for HD projection TV, we have studied the effects of the plasma treatment on ITO film to reduce impurities in imager.