• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2453-2459
• /
• 2014

Five novel cyanine dyes containing julolidine and indole moieties were synthesized. Several color compensating films for plasma display panels (PDP) were prepared using these dyes. The spectroscopic and physicochemical properties of the synthesized dyes in both solution and film state were evaluated. For each color compensating film, the optimum ratio of dye to binder was determined on the basis of transmittance, half band width, and photo-stability of the color compensating film. The five synthesized dyes showed sharp absorption peaks near 590 nm (orange light) and had molar extinction coefficients above $1{\times}10^5M^{-1}cm^{-1}$. The melting point of the dyes was above $200^{\circ}C$ and photo-stability of the color compensating films was improved by introducing substituents at the 5th position on the indole derivatives.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.949-952
• /
• 2006

We have measured the excited Xe atoms density in the $1s_5$ metastable states by laser absorption spectroscopy in accordance with various barrier ribs. In this experiment, the average density of one cell in the panel with stripe barrier rib has been measured to be $1.8{\times}10^{12}cm^{-3}$. The panel with close type barrier rib has been measured to be $5.1{\times}10^{12}cm^{-3}$.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.878-885
• /
• 2008

최근에 많은 수요와 각광을 받고 있는 디스플레이 장치에서 CRT는 곡면이며 무겁고 큰 부피 때문에 LCD, PDP, OLED와 같은 평판디스플레이(FPD)로 대체되고 있다. FPD는 $0.6\sim0.8mm$ 두께의 대면적 글래스에 여러 공정을 거친 후에 최종 제품 규격으로 절단하여 제작하기 때문에 글래스의 면적이 크면 클수록 FPD의 생산성이 높다는 밀접한 관계를 갖는다. 따라서 FPD 제조 업계에서는 글래스 면적을 증가시키기 위하여 노력하고 있으며, 예를 들면, 현재 8세대 LCD인 경우 약 $2,200mm\times2,600mm$의 면적을 가진다. 이러한 글래스를 이송하는 대표적인 장치로서 공기부상 컨베어시스템은 압축공기를 이용해서 FPD용 대면적 글래스 등을 약 $0.3\sim0.5mm$ 정도 부상시켜 비접촉으로 이송할 수 있는 장치이다. 이 때 글래스와 다공질판 표면 사이의 공기 유동이 모델링되고 해석되며, 이것으로부터 글래스의 공기부양 조건이 예측될 수 있다. 글래스를 이송시 전기공급 중단에 의하여 압축공기가 공급되지 않아 부상판과 접촉이 발생하였을 때, 자기윤활 특성을 가진 다공질판 위의 글래스는 1mm 홀을 많이 가진 사각덕트 부상판 위의 글래스와 조사, 비교된다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.552-554
• /
• 2004

Barrier ribs of plasma display panel (PDP) are glass matrix composite reinforced with alumina particles. Mechanical properties of the ribs are very crucial for the improvement in reliability of the panel as the ribs might fracture during transportation and service. In this study, therefore, the effects of filler type and content on the mechanical properties of the ribs were investigated. The fillers used include $Al_2O_3$, $TiO_2$, $ZrO_2$ and fused silica. The content of the filler was changed from 0 to 40 vol.%. The mechanical properties of the ribs measured were hardness, Young's modulus, fracture toughness, and 3-point bending modulus. The fracture toughness evaluated by micro-Vicker's indentation of the composites, in general, was measured to increase with the content of the filler until the sintered density does not decrease significantly. The improvement, however, was dependent on the type of filler employed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.675-678
• /
• 2006

We developed a Flat Fluorescent Lamp(FFL) with a high luminance by using the same discharge mode as PDP. Our FFL has the simple and unique structure where the glass substrates are used as dielectric layers. The panel has a striped line shape of 7 inch diagonal size. The Xe-Ne-He mixture gas was used to generate the plasma, and the gas discharge characteristics under both total gas pressure and partial gas pressure were investigated. The panel showed a maximum high luminance $7,270cd/m^2$ under bias of 20KHz pulse of 3KV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.101-104
• /
• 2003

The real test panel with the $200{\mu}m$ discharge gap in a coplanar AC plasma display panel was investigated. The auxiliary electrode was placed between two sustain electrodes and used for providing wall charges and prime particle during sustain period. The luminous efficiency had the maximum value when the voltage of the auxiliary pulses was 20 ${\sim}$ 100[V]. The luminous efficiency of coplanar long-gap discharge with auxiliary electrode was 2.6 times as much as that of the conventional structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.381-384
• /
• 2003

Photosensitive electordes(Ag and Black) are widely used in the patterning of both address and bus electrodes on the rear and front panel of plasma display panel (PDP). As the need for high resolution(>XGA) and large area(>60 inches) PDP is increased, basic understanding of each component of formulation on the photolithographic process of patterning electrodes are required in order to increase the yield in the production of PDP. In this work, the materials and amount of necessary components of photosensitive electrode paste and their effect on the photolithographic process of patterning electrodes were studied.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.136-136
• /
• 2010

일반적인 플라즈마의 밀도측정에는 랑뮤어(Langmuir)탐침법이 보편적으로 사용되고 있다. 그러나 LCD(Liquid Crystal Display)나 PDP(Plasma Display Panel) 등 미세 방전 플라즈마는 이러한 방법으로는 측정이 너무 어려워서 잘 사용되지 않고 있다. 그래서 이러한 경우 간접측정 방법이 사용되고 있다. 본 연구에서는 알려진 간접 측정방법과는 다른 방식인 spectrum analyzer를 사용하여 측정해 보았다. LCD에서 사용되는 BLU(Back Light Unit)lamp와 PDP panel을 각각 측정하여 기존의 간접측정 방법의 결과와 비교해 보았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.187-190
• /
• 2002

Plasma Display Panel(PDP) has been recognized as one of the most competitive display panel. Hence, the importance of PDP driving circuit is getting higher and higher. At the same time, it is strongly required for the driving circuit to be high efficiency, high stability, and cost effective one. In this work, a stable PDP driving circuit is developed by improving the circuit configuration. And the reliability and the productivity of the driving circuit are improved by using the Intelligent Power Module(IPM) technology. Finally operating characteristics of the developed IPM driving circuit are verified by using signal source board developed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.251-254
• /
• 2005

A new driving waveform was proposed to reduce the cost in PDP-TV based on Vt close curve by eliminating the common (X) board under the conventional 42-inch panel structure. Due to the serious misfiring problem during a sustain-period when applying the new driving waveform, the wall voltage was measured and analyzed after the reset-period using Vt close curve. As a result of adopting the proposed driving waveform designed using Vt close curve analysis, the cost of PDP module could reduce compared with the conventional PDP module without any misfiring discharge.