• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.5
• /
• pp.295-300
• /
• 2016

Submucosal infiltration and the topical application of epinephrine as a vasoconstrictor produce excellent hemostasis during surgery. The hemodynamic effects of epinephrine have been documented in numerous studies. However, its metabolic effects (especially during surgery) have been seldom recognized clinically. We report two cases of significant metabolic effects (including lactic acidosis and hyperglycemia) as well as hemodynamic effects in healthy patients undergoing orthognathic surgery with general anesthesia. Epinephrine can induce glycolysis and pyruvate generation, which result in lactic acidosis, via ${\beta}2$-adrenergic receptors. Therefore, careful perioperative observation for changes in plasma lactate and glucose levels along with intensive monitoring of vital signs should be carried out when epinephrine is excessively used as a vasoconstrictor during surgery.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.6
• /
• pp.595-601
• /
• 2000

The seven trace metals contents of agricultural products in Kwang-ju were investigated to provide the basic data for its residual limits. Ten kinds of agricultural products (onion, welsh onion, garlic, lettuce, cabbage, pepper, spinach, radish, pear, peach) collected within from Kwang-ju in 1999 were analyzed by Mercury Analyzer for mercury. Inductively Coupled Plasma spectrometer and Atomic Absorption spectrophotometer equipped with Vapor Generation Accessory for Cu, Cd, Mn, Pb, Zn and As. Hg contents were not detected in all samples and As content were detected N.D. ∼0.005 ppm. Cd and Pb contents were detected N.D ∼0.088 ppm and N.D.∼0.096 ppm, respectively, Cu, Mn and Zn contents were 0.109∼1.072 ppm. 0.829∼6.195 ppd and 0.731∼6.176 ppm, respectively. The trace metal concentrations of the agricultural products in Kwang-ju called clean area were within the background level which growth is facilitated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.124-124
• /
• 2010

Currently, extreme ultraviolet lithography (EUVL) is being investigated for next generation lithography. EUVL is one of competitive lithographic technologies for sub-22nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance due to the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore, new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.

• Applied Science and Convergence Technology
• /
• v.27 no.3
• /
• pp.47-51
• /
• 2018

We fabricated an anode-type ion beam source and studied its driving characteristics of the initial extraction of ions using two driving mechanisms: a diffusion phenomenon and a charge repulsion phenomenon. For specimen exposed to the ion beam in two methods, the surface impurity element was investigated by using X-ray photoelectron spectroscopy. Upon Ar gas injection for plasma generation the ion beam source was operated for 48 hours. We found a Fe 2p peak 5.4 at. % in the initial ions by the diffusion mechanism while no indication of Fe in the ions released in the charge repulsion mechanism. As for a long operation of 200 min, the temperature of ion beam sources was measured to increase at the rate of ${\sim}0.1^{\circ}C/min$ and kept at the initial value of $27^{\circ}C$ for driving by diffusion and charge repulsion mechanism, respectively. In this study, we confirmed that the ion beam source driven by the charge repulsion mechanism was very efficient for a long operation as proved by little electrode damage and thermal stability.

• Korean Journal of Animal Reproduction
• /
• v.26 no.4
• /
• pp.321-328
• /
• 2002

The hormone resistin is associated with type II diabetes mellitus in rodent model. Resistin impairs glucose tolerance and insulin action. A new class of anti-diabetic drugs were called thiazolidinediones (TZDs) downreguates a resistin. Resistin gene expression is induced during adipocyte differentiation and resistin polypeptide is secreted by adipocytes. But, the correlation between increased adiposity and resistin remains unknown. The objectives of this study was to clone a mouse resistin CDNA and to generate transgenic mice overexpressing mouse resistin gene. The pCMV-mus/resistin gene was prepared from previous recombinant pTargeT$^{TM}$-mus/resistin by digestion of Bgl II, and has used for microin- jection into pronuclei of one cell embryos. Mouse resistin expression was detected in transgenic F$_1$mice by RT-PCR. The transgenic mouse with resistin gene expression has heavier body weight which was measured higher level of plasma glucose than that of normal mouse. And in diet-induced experiments, in fasting group, resistin expression was higher than that of re-feeding group. This result demonstrates that the resistin gene overexpressing mice may be became to obesity and be useful as an animal disease model to be diabetes caused by insulin resistance of resistin.n.

• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.138-144
• /
• 2016

The discharge characteristics of pulse-driven coplanar micro barrier discharges for an ultraviolet (UV) light source using Ne-Xe mixture have been investigated using a two-dimensional fluid simulation at near-atmospheric pressure. The densities of electrons, the radiative excited states, the metastable excited states, and the power loss are investigated with the variations of gas pressure and the gap distance. With a fixed gap distance, the number of the radiative states $Xe^*(^3P_1)$ increases with the increasing driving voltage, but this number shows weak dependency on the gas when that pressure is over 400 Torr. However, the number of the radiative states increases with the increase of the gap distance at a fixed voltage, while the power loss decreases. Therefore, a long gap discharge has higher efficiency for UV generation than does a short gap discharge. A slight change in the electrode tilt angle enhances the number of radiative species 2 or 3 times with the same operation conditions. Therefore, the intensity and efficiency of the UV light source can be controlled independently by changing the gap distance and the electrode structure.

• Journal of Integrative Natural Science
• /
• v.9 no.3
• /
• pp.190-198
• /
• 2016

Xanthine Oxidase is an enzyme, which oxidizes hypoxanthine to xanthine, and xanthine to uric acid. It is widely distributed throughout various organsincluding the liver, gut, lung, kidney, heart, brain and plasma. It is involved in gout pathogenesis. In this study, we have performed Comparative Molecular Field Analysis (CoMSIA) on a series of 2-(indol-5-yl) thiazole derivatives as xanthine oxidase (XO) inhibitors to identify the structural variations with their inhibitory activities. Ligand based CoMSIA models were generated based on atom-by-atom matching alignment. In atom-by-atom matching, the bioactive conformation of highly active molecule 11 was generated using systematic search. Compounds were aligned using the bioactive conformation and it is used for model generation. Different CoMSIA models were generated using different alignments and the best model yielded across-validated $q^2$ of 0.698 with five components and non-cross-validated correlation coefficient ($r^2$) of 0.992 with Fisher value as 236.431, and an estimated standard error of 0.068. The predictive ability of the best CoMSIA models was found to be $r{^2}_{pred}$ 0.653. The study revealed the important structural features required for the biological activity of the inhibitors and could provide useful for the designing of novel and potent drugs for the inhibition of Xanthine oxidase.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.48-52
• /
• 2009

Micro-hole targets are studied to generate energetic protons from laser-thin foil targets by using 2-dimensional particle-in-cell simulations. By using a small hole, the maximum energy of the accelerated proton is increased to 4 times higher than that from a simple planar target. The main proton acceleration mechanism of the hole-targets is the electrostatic field created between the fast electrons accelerated by the laser pulse ponderomotive force combined with the vacuum heating and the target rear surface. But in this case, the proton angular distribution shows double-peak shape, which means poor collimation and low current density. By using a small cone-shaped hole, the maximum proton energy is increased 3 times higher than that from a simple planar target. Furthermore, the angular distribution of the accelerated protons shows good collimation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2076-2082
• /
• 2011

The goal of this paper is to find an operating conditions of the single direct ethanol fuel cell such as the cell temperature, and flow rates of ethanol and oxygen. To investigate the output characteristics, the electrical current increased from 0[A] with interval of 0.001[A] every 2[s], and the cell voltage was increased until the voltage became 0.05[V]. Related to the effect of the cell temperature, the output characteristics both voltage and power were increased upto 80[$^{\circ}C$] according to the increase of the current density, but those were decreased over that temperature. In addition, the optimal flow rate of ethanol in anode was identified as of 2[mL/min] due to the dependence of generation rate such as the hydrogen ion and electron. And the flow rate of oxygen in cathode was desirable to about 300[sccm/min], it might be affected by the chemical reaction rate of the water formation among hydrogen ion, electron, and oxygen. Consequently, the fundamental conditions were identified in this work, and it will be carried out to find the best conditions of membrane by the effect of the plasma surface treatment, and the effect of other catalysts except for a platinum.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.25-28
• /
• 2008

본연구는 부스트형 대기압 플라즈마 전원장치에 대한 연구로서 부스트형 전원장치는 플라즈마의 발생을 원활하게 하기위해 커패시터로 모델링되는 부하단에 인가되는 전압을 직접 제어하는 방식을 의미한다. 기존의 정현파 공진형 전원장치는 PWM기법을 이용하여 펄스의 폭을 증감하는 방식으로 전압의 크기를 제어하지만 이 방식은 별도의 공진회로를 이용하여 공진을 일으킨 다음 이를 부하에 인가하는 방식으로 구성되기 때문에 속응성이 떨어지고 균일한 플라즈마를 발생시키기 어렵다. 부스트형 전원장치는 별도의 부스트 컨버터로 직류전압을 제어하여 부하단에 입력되는 전압을 직접 제어하므로 매우 균일한 플라즈마를 발생시킬 수 있는 이점이 있으나 별도의 부스트용 스위치가 필요하고 이로 인한 효율의 감소 및 사이즈의 증가가 되는 문제점이 생긴다. 본 연구에서는 커패시터로 모델링되는 부하를 이용하여 직접 공진을 일으키고 공진된 부하 전압을 직접 부스트 스위치에 인가시키는 방식으로 부스트용 스위치의 소프트 스위칭이 가능한 새로운 방식을 개발하였다. 개발된 방식에서는 부스트용 스위치가 ZCS형태로 켜지고 ZVS형태로 꺼지는 특성을 갖게 되므로 별도의 추가 회로 없이도 획기적인 효율 증가와 방열판 사이즈의 감소로 인한 제품의 경량화가 가능한 장점이 있다. 또한, DC링크 커패시터의 최소화로 인하여 부하단의 아크 문제가 자동적으로 해결되는 장점도 있다. 제안된 제어 방식은 시뮬레이션과 실험으로 그 타당성을 입증하였다.