• 제목/요약/키워드: Plasma emission

검색결과 1,188건 처리시간 0.024초

황 흡착 알긴산의 Lactobacillus acidophillus 성장에 미치는 영향 및 항 돌연변이 작용 (The Antimutagenic Activity of Sulfated Alginate and Its Effect on the Growth of Lactobacillus acidophillus)

  • 강경금;박난희;김정목
    • 한국식품영양과학회지
    • /
    • 제33권4호
    • /
    • pp.757-761
    • /
    • 2004
  • 톳으로부터 산ㆍ알칼리 (AASA) 방법으로 추출한 알긴산에 인위적으로 sulfate를 흡착시킨 후 ICP-AES를 이용해서 확인한 결과 3% alginate용액에서 1843 ppm 농도의 sulfate가 검출되었다. 배지 자체적으로 황을 함유하고 있는 MRS broth와 황이 없는 peptone water배지 에 S-alginate와 alginate를 0.25, 1, 2% 농도별로 첨가하여 Lactobacillus acidophilus를 접종한 후 배양하면서 유산균의 성장에 대한 영향을 살펴 본 결과 모든 농도에서 이들 배지에 S-alginate를 첨가한 것이 유산균의 성장을 증가시키는 것을 알 수 있었다. S-alginate와 alginate를 0.25% 첨가한 경우 유산균의 성장은 비슷한 값을 나타내었으나 농도가 증가할수록 S-alginate를 첨가한 군이 alginate만 첨가한 군보다는 유산균의 성장을 늘리는 것으로 나타났다. Ames test를 통해서 S-alginate는 돌연변이성을 전혀 나타내지 않았으며 항 돌연변이성는 직접변이원에 대하여 TA98균주는 14∼19%, TA100 균주에 대해서는 12∼17%까지의 억제율을 보였으며 2%의 S-alginate가 가장 높은 억제율을 나타내었다.

키토산을 이용한 유기 발광 소자에 관한 연구 (A Sutdy on Organic Emission Device of Chitosan Used)

  • 정기택;강수정;김남기;노승용
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
    • /
    • pp.1062-1065
    • /
    • 2004
  • The importance of display is becoming increasingly important due to the development of information and industry where it leads to diverse and abundant information in today's society. The demand and application range for FPD(Flat Panel Display), specifically represented by LCD(Liquid Crystal Display) and PDP(Plasma Display Panel), have been rapidly growing for its outstanding performance and convenience amongst many other forms of display. The current focus has been on OLED(Organic Light Emitting Diode) in the mobile form, which has just entered into mass production amid the different types of FPD. Many studies are being conducted in regards to device, vacuum evaporation, encapsulation, and drive circuits with the development of device as a matter of the utmost concern. This study develops a new type of light-emitting materials by synthesizing medical polymer organic chitosan and phosphor material CuS. Chitosan itself satisfies the Pool-Frenkel Effect, an I-V specific curve, with a thin film under $20{mu}m$, and demonstrates production possibility for a living body sensors solely with the thin film. Furthermore, it enables production possibility for EML of organic EL device(Emitting Layer) with liquid Green light emitting and Blue light emitting as a result of synthesis with phosphor material.

  • PDF

A comparative evaluation of $CO_2$ and erbium-doped yttrium aluminium garnet laser therapy in the management of dentin hypersensitivity and assessment of mineral content

  • Belal, Mahmoud Helmy;Yassin, Abdulaziz
    • Journal of Periodontal and Implant Science
    • /
    • 제44권5호
    • /
    • pp.227-234
    • /
    • 2014
  • Purpose: Dentin hypersensitivity is a potential threat to oral health. Laser irradiation may provide reliable and reproducible treatment but remains controversial. The present study aimed to evaluate the effects of $CO_2$ or erbium-doped yttrium aluminium garnet (Er:YAG) laser therapy, and to assess mineral content. Methods: Eighteen human single-rooted teeth affected with advanced periodontitis were obtained. Buccal and lingual surfaces were planed to form 36 specimens. Ethylenediaminetetraacetic acid gel (24%) was applied to remove the smear layer and simulate hypersensitive teeth. The experimental groups were: group 1, control (no irradiation); group 2, $CO_2$ laser (repetitive pulsed mode, 2 W, $2.7J/cm^2$); and group 3, Er:YAG laser (slight contact mode, 40 mJ/pulse and 10 Hz). To evaluate dentinal tubule occlusion, six specimens per group (2-mm thickness) were prepared and observed using scanning electron microscopy (SEM) for calculation of the occlusion percentage. To evaluate the mineral content, six specimens per group (0.6-mm thickness) were used, and then the levels of Ca, K, Mg, Na, and P were measured by inductively coupled plasma-atomic emission spectrometry. In addition, the surface temperature of the specimens during laser irradiation was analyzed by a thermograph. Results: The SEM photomicrographs indicated melted areas around exposed dentinal tubules and a significantly greater percentage of tubular occlusion in the $CO_2$ and Er:YAG laser groups than the control, and in the Er:YAG group than the $CO_2$ laser group. In addition, no significant differences were noted among the experimental groups for the mineral elements analyzed. The $CO_2$ laser group showed an evident thermal effect compared to the Er:YAG group. Conclusions: $CO_2$ and Er:YAG laser are effective in treating dentin hypersensitivity and reducing its symptoms. However, the Er:YAG laser has a more significant effect; thus, it may constitute a useful conditioning item. Furthermore, neither $CO_2$ nor Er:YAG lasers affected the compositional structure of the mineral content.

Biomonitoring of Metal Exposure During Additive Manufacturing (3D Printing)

  • Ljunggren, Stefan A.;Karlsson, Helen;Stahlbom, Bengt;Krapi, Blerim;Fornander, Louise;Karlsson, Lovisa E.;Bergstrom, Bernt;Nordenberg, Eva;Ervik, Torunn K.;Graff, Pal
    • Safety and Health at Work
    • /
    • 제10권4호
    • /
    • pp.518-526
    • /
    • 2019
  • Background: Additive manufacturing (AM) is a rapidly expanding new technology involving challenges to occupational health. Here, metal exposure in an AM facility with large-scale metallic component production was investigated during two consecutive years with preventive actions in between. Methods: Gravimetric analyzes measured airborne particle concentrations, and filters were analyzed for metal content. In addition, concentrations of airborne particles <300 nm were investigated. Particles from recycled powder were characterized. Biomonitoring of urine and dermal contamination among AM operators, office personnel, and welders was performed. Results: Total and inhalable dust levels were almost all below occupational exposure limits, but inductively coupled plasma mass spectrometry showed that AM operators had a significant increase in cobalt exposure compared with welders. Airborne particle concentrations (<300 nm) showed transient peaks in the AM facility but were lower than those of the welding facility. Particle characterization of recycled powder showed fragmentation and condensates enriched in volatile metals. Biomonitoring showed a nonsignificant increase in the level of metals in urine in AM operators. Dermal cobalt and a trend for increasing urine metals during Workweek Year 1, but not in Year 2, indicated reduced exposure after preventive actions. Conclusion: Gravimetric analyses showed low total and inhalable dust exposure in AM operators. However, transient emission of smaller particles constitutes exposure risks. Preventive actions implemented by the company reduced the workers' metal exposure despite unchanged emissions of particles, indicating a need for careful design and regulation of the AM environments. It also emphasizes the need for relevant exposure markers and biomonitoring of health risks.

유구(維鳩)-광천(廣川) 금은광화대지역(金銀鑛化帶地域)에서의 토양(土壤) 및 농작물(農作物)의 중금속오염(重金屬汚染) (Heavy Metal Contamination of Soils and Crop Plants in the Yugu-Kwangcheon Au-Ag Metallogenic Province)

  • 김경웅;백성희;이현구
    • 자원환경지질
    • /
    • 제28권4호
    • /
    • pp.389-394
    • /
    • 1995
  • Yugu-Kwangcheon Au-Ag Province is connected to the southwestern part of the Cheonan Province and includes the Gubong (one of the biggest gold mine in past), Daebong and Samgwang mines. Cadmium concentrations in sphalerite of Yugu-Kwancheon Province is higher than those of other Au-Ag provinces and could be the source of the heavy metal contaminations. Heavy metals are present in rock-soil-plant-human system from natural geological materials, and dietary intake through this system makes a significant contribution to the ingestion of heavy metals by man. In order to examine the degree and extent of heavy metal contaminations in the Gubong, Daebong and Samgwang mine areas of Yugu-Kwangcheon Province, soil, stream water, sediment and crop plant samples were taken and analyzed for Cd, Cu, Pb and Zn by Atomic Absorption Spectrometry (AAS) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). Cadmium and Pb concentrations in paddy/farm soils and stream sediments from the Gubong and Samgwang mine areas are higher than those in uncontaminated soils. Lead concentrations in crop plants cultivated in these soils are high up to $0.38{\mu}g/g$ in rice grain and $4.5{\mu}g/g$ in sesame. In these mine areas, regular consumption of crop plants by the local population would seem to pose a potential health problems from long-term Pb exposure. The biological absorption coefficient in rice grain for heavy metals varies in the order $C_d=Zn>Cu>Pb$ and the relationship between Cd concentrations in soils and crop plants is expressed by the equation $Cd_{plant}=0.11245\;Log\;Cd_{soil}+0.13472$.

  • PDF

Microfabrication of Submicron-size Hole on the Silicon Substrate using ICP etching

  • Lee, J.W.;Kim, J.W.;Jung, M.Y.;Kim, D.W.;Park, S.S.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.79-79
    • /
    • 1999
  • The varous techniques for fabrication of si or metal tip as a field emission electron source have been reported due to great potential capabilities of flat panel display application. In this report, 240nm thermal oxide was initially grown at the p-type (100) (5-25 ohm-cm) 4 inch Si wafer and 310nm Si3N4 thin layer was deposited using low pressure chemical vapor deposition technique(LPCVD). The 2 micron size dot array was photolithographically patterned. The KOH anisotropic etching of the silicon substrate was utilized to provide V-groove formation. After formation of the V-groove shape, dry oxidation at 100$0^{\circ}C$ for 600 minutes was followed. In this procedure, the orientation dependent oxide growth was performed to have a etch-mask for dry etching. The thicknesses of the grown oxides on the (111) surface and on the (100) etch stop surface were found to be ~330nm and ~90nm, respectively. The reactive ion etching by 100 watt, 9 mtorr, 40 sccm Cl2 feed gas using inductively coupled plasma (ICP) system was performed in order to etch ~90nm SiO layer on the bottom of the etch stop and to etch the Si layer on the bottom. The 300 watt RF power was connected to the substrate in order to supply ~(-500)eV. The negative ion energy would enhance the directional anisotropic etching of the Cl2 RIE. After etching, remaining thickness of the oxide on the (111) was measured to be ~130nm by scanning electron microscopy.

  • PDF

유도결합 $Cl_2/CHF_3, Cl_2/CH_4, Cl_2/Ar $플라즈마를 이용한 InGaN 건식 식각 반응 기구 연구

  • 이도행;김현수;염근영;이재원;김태일
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1999년도 제17회 학술발표회 논문개요집
    • /
    • pp.249-249
    • /
    • 1999
  • GaN과 같은 III-nitride 반도체 관한 식각 기술의 연구는 blue-emitting laser diode(LD)를 위한 경면(mirror facet)의 형성뿐만아니라 새로운 display 용도의 light emitting diodes (LED), 고온에서 작동되는 광전소자 제조 등에도 그 중요성이 증대되고 있다. 최근에는 III-nitride 물질의 높은 식각속도와 미려하고 수직한 식각형상을 이루기 위하여 ECR(Electron Cyclotron Resonance)이나 ICP(Inductively Coupled Plasma)와 같은 고밀도 플라즈마 식각과 CAIBE(Chemically assisted ion beam etching)를 이용한 연구가 진행되고 있다. 현재 제조되어 지고 있는 LED 및 LD와 같은 광소자의 구조의 대부분은 p-GaN/AlGaN/InGaN(Q.W)/AlGaN/n-GaN 와 같은 여러 층의 형태로 이루어져 있다. 이중 InGaN는 광소자나 전자소자의 특성에 영향을 주는 가장 중요한 부분으로써 현재까지 보고된 식각연구는 undoped GaN에 대부분 집중되고 있고 이에 비해 소자 특성에 핵심을 이루는 InGaN의 식각특성에 관한 연구는 미흡한 상황이다. 본 연구에서는 고밀도 플라즈마원인 ICP 장비를 이용하여 InGaN를 식각하였고, 식각에는 Cl2/CH4, Cl2/Ar 플라즈마를 사용하였다. InGaN의 식각특성에 영향을 미치는 플라즈마의 특성을 관찰하기 위하여 quadrupole mass spectrometry(QMS)와 optical emission spectroscopy(PES)를 사용하였다. 기판 온도는 5$0^{\circ}C$, 공정 압력은 5,Torr에서 30mTorr로 변화시켰고 inductive power는 200~800watt, bias voltage는 0~-200voltage로 변화시켰으며 식각마스크로는 SiO2를 patterning 하여 사용하였다. n-GaN, p-GaN 층 이외에 광소자 제조시 필수적인 InGaN 층을 100% Cl2로 식각한 경우에 InGaN의 식각속도가 GaN에 비해 매우 낮은 식각속도를 보였다. Cl2 gas에 소량의 CH4나 Ar gas를 첨가하는 경우와 공정압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%Ar 플라즈마에서 공정 압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%CHF3 와 Cl2/10%Ar 플라즈마에서 공정압력을 15mTorr로 감소시키는 경우 InGaN과 GaNrks의 선택적인 식각이 가능하였다. InGaN의 식각속도는 Cl2/Ar 플라즈마의 이온에 의한 Cl2/CHF3(CH4) 플라즈마에서의 CHx radical 형성에 의하여 증가하는 것으로 사료되어 진다.

  • PDF

교통량 과밀 도로주변의 토양과 가로수, 대기중 Pb, Cu, Zn 중금속 농도와 그 상관성에 관한 연구 (Pb, Cu, Zn Contaminants and Their Correlation of Soil, Leave and Bark of Ginkgo. B and Ambient Air Adjacent to a Heavy Traffic Road Side)

  • 박기학
    • 한국환경보건학회지
    • /
    • 제18권2호
    • /
    • pp.19-25
    • /
    • 1992
  • The study was carried out to investigate the correlation between the heavy metals emitted by the motor vehicles with the heavy traffic road side environment (soil, leave, bark, ambient air). The Pb, Cu, Zn contents in road side soil sand leaves, barks from Ginkgo, biloba and ambient air adjacent to the heavy traffic road side from June to August, 1992 Suwon city were analyzed by Atomic absorption spectrometry and Inductively coupled plasma emission spectrophotometry. The results were as follows: 1) The high levels of heavy metals concentration were Pb, at city-terminal in soil (186 $\mu$g/g), Cu, at city-terminal in soil (221 $\mu$g/g), Zn, at city-terminal in ambient air (252 $\mu$g/m$^{3}$). 2) The low leves of heavy metals concentration were Pb, at North-gate in ambient air (1.65$\mu$g/m$^{3}$), Cu, at North-gate in ambient air (4 $\mu$g/m$^{3}$), Zn, at North-gate in ambient air (15.31$\mu$g/m$^{3}$). 3) The regional distribution of Pb, Cu, Zn in road side soils, leaves and barks from Ginkgo, biloba, ambient air show high levels in turn, city4erminal, Guan Sean Dong, South gate, North gate. 4) The concentration of heavy metals (Pb, Cu, Zn) in soils, leaves, barks, ambient air was highly correlated with the traffic volume of the sampling sites (r=0.64~0.96). To conclude that the high levels of Pb, Cu, Zn contaminations were positively related to motor vehicles-borne pollutants and road side soils, trees, ambient air adjacent to a high density building area with low road coverage and heavy traffic volume were reflected strongly by the hazardous pollutants emitted by motor vehicles.

  • PDF

Adrenocorticotropic hormone (ACTH)-producing pheochromocytoma presented as Cushing syndrome and complicated by invasive aspergillosis

  • Cho, Jae Ho;Jeong, Da Eun;Lee, Jae Young;Jang, Jong Geol;Moon, Jun Sung;Kim, Mi Jin;Yoon, Ji Sung;Won, Kyu Chang;Lee, Hyoung Woo
    • Journal of Yeungnam Medical Science
    • /
    • 제32권2호
    • /
    • pp.132-137
    • /
    • 2015
  • Adrenocorticotropic hormone (ACTH)-producing pheochromocytoma has been rarely reported, whereas only a few cases of Cushing syndrome accompanied by opportunistic infections have been reported. We experienced a patient with pheochromocytoma with ectopic Cushing syndrome complicated by invasive aspergillosis. A 35-year-old woman presented with typical Cushingoid features. Her basal plasma cortisol, ACTH, and 24-hour urine free cortisol levels were significantly high, and 24-hour urine metanephrine and catecholamine levels were slightly elevated. The endogeneous cortisol secretion was not suppressed by either low- or high-dose dexamethasone. Abdominal computed tomography (CT) revealed a heterogeneous enhancing mass measuring approximately 2.5 cm in size in the left adrenal gland. No definitive mass lesion was observed on sellar magnetic resonance imaging. On fluorine-18 fluorodeoxyglucose positron emission tomography/CT, a hypermetabolic nodule was observed in the left upper lung. Thus, we performed a percutaneous needle biopsy, which revealed inflammation, not malignancy. Thereafter, we performed a laparoscopic left adrenalectomy, and its pathologic finding was a pheochromocytoma with positive immunohistostaining for ACTH. After surgery, the biochemistry was normalized, but the clinical course was fatal despite intensive care because of the invasive aspergillosis that included the lungs, retina, and central nervous system.

신안침몰선 인양 중국 동전의 화학조성 (CHEMICAL COMPOS IT80N OF AHCIENT CH INESE COINS RICOVIRID FROM THI SHINAN SHIPWRECK)

  • 이창근;강대일
    • 보존과학연구
    • /
    • 통권10호
    • /
    • pp.1-40
    • /
    • 1989
  • Between 1976 and 1984 approximately 26.7 tons of Chinese coins were recovered from a shipwreck which was found at the seabed of the Shin an area in the south-western coast of the Korean peninsula. Elements, Cu, Pb, Sn, Fe, Sb, As, Zn, Ag, Ni, Co and Mn, of 54 pieces of the coins were determined by Inductively Coupled Plasma Atomic Emission Spectroscopy(ICP-AIS). The result shows that Ch, Pb, and Sn were found to be major elements roughly the coins with the ratio of 7 : 2 : 1, respectively. Trace elements were classified into 3 levels according to the avarage concentration : Fe,As and Sb(0.1-0.5%), Ag, Mi, Co and Zn(100-1000ppm) and Mn(10ppm). Some systematic tendencies are observed in the composition change with a function of their minting ages .The Wuzhu coins(오수전) from the Eastern Han dynasty(A.D.25-219 )are much more abundant in Cu than the coins of Tang dynasty(A.D.618-907) and later periods. Major element compositions of the Kai -tong Vuan-Bao(개통원보) coins from the Tang dynasty, were remarkably variable. In general, however, the Tang dynasty coins were much more abundant in Cu than the Song dynasty(A.S.S60-1279) coins. The amount of major elements Cu and Sn decreases while that of Pb in creasesby passage of age from the Bei Song dynasty(A.D.960-1127) to later Nam Song dynasty (A.D.1127-1279 ). It means that the quality of coins mere degraded. The amounts of trace elemends(Fe, As, Co, Hn) increases with the above age. High amounts of trace elements are supposed to be a reflection of immaturity of minting techniques or use of impurity-rich raw materials. The Jin dynasty(A.D.1125-1234) coins are found to be rich in Sn and thus contain Pb as the third component. It is quite different from the coins of the Song dynasty. The Zhi-dai Tong-Bao(지대통보) coins of the Yuan dynasty from A.0.1310 are much more abundant in Cu and Sn than those of the Nam Song dynasty .

  • PDF