• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.62-62
• /
• 2003

고밀도 유도결합 플라즈마(high density inductively coupled plasma) 식각은 GaAs 이종접합 양극성 트랜지스터(HBTs)와 고속전자 이동도 트랜지스터(HEMTs)와 같은 GaAs 기반 반도체의 정교한 패턴을 형성하는데 더욱 많이 이용되고 있다 본 연구는 고밀도 플라즈마 소스(source)인 평판형(planar) 고밀도 유도결합 플라즈마 식각장치를 이용하여 $BCl_3$ 와 $BCl_3/Ar$ 가스에 따른 GaAs 식각결과를 비교 분석하였다. 공정변수는 ICP 소스 파워를 0-500W, RIE 척(chuck) 파워를 0-150W, 공정압력을 0-15 mTorr 이었다. 그리고 가스 유량은 20sccm(standard cubic centimeter per minute)으로 고정시킨 상태에서 Ar 첨가 비율에 따른 GaAs의 식각결과를 관찰하였다. 공정 결과는 식각률(etch rate), GaAs 대 PR의 선택도(selectivity), 표면 거칠기(roughness)와 식각후 표면에 남아 있는 잔류 가스등을 분석하였다. 20 $BCl_3$ 플라즈마를 이용한 GaAs 식각률 보다 Ar이 첨가된 (20-x) $BC1_3/x Ar$ 플라즈마의 식각률이 더 우수하다는 것을 알 수 있었다. 식각률 증가는 Ar 가스의 첨가로 인한 GaAs 반도체와 Ar 플라즈마의 충돌로 나타난 결과로 예측된다. $BCl_3$ 와 $BC1_3/Ar$ 플라즈마에 노출된 GaAs 반도체 모두 표면이 평탄하였고 수직 측벽도 또한 우수하였다. 그리고 표면에 잔류하는 성분은 Ga와 As 이외에 $Cl_2$ 계열의 불순물이 거의 발견되지 않아 매우 깨끗함을 확인하였다. 이번 발표에서는 $BCl_3$ 와 $BCl_3/Ar$ 플라즈마를 이용한 GaAs의 건식식각 비교에 대해 상세하게 보고 할 것이다.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.169-175
• /
• 1998

The plasma etching of polysilicon was performed with the HBr/$Cl_2/He-O_2$ gas mixture. The residual layers after photoresist strip were investigated using x-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The etch residue was identified as silicon oxide deposited on the top of the patterned polysilicon. In order to clarify the formation mechanism of the etch residue, the effects of various gas mixtures such as $Cl_2/He-O_2$and HBr/$Cl_2$were investigated. We found that the etch residue is well formed in the presence of oxygen, suggesting that the etch residue is caused by the reaction of oxvgen and non-volatile silicon halide compounds. Wet cleaning and dry etch cleaning processes were applied to remove the polysilicon etch residue, which can affect the electrical characteristics and further device processes. XPS results show that the wet cleaning is suitable for the removal of the etch residue.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.16.1-16.1
• /
• 2011

$TiO_2$ is a promising material for gas sensors. To achieve high sensitivities, the material should exhibit a large surface-to-volume ratio and possess the high accessibility of the gas molecules to the surface. Accordingly, a wide variety of porous $TiO_2$ nanomaterials synthesized by wet-chemical methods have been reported for gas sensor applications. Nonetheless, achieving the large-area uniformity and comparability with well-established semiconductor production processes of the methods is still challenging. An alternative method is soft-templating which utilizes nanostructured inorganic or organic materials as sacrificial templates for the preparation of porous materials. Fabrication of macroporous $TiO_2$ films and hollow $TiO_2$ tubes by soft-templating and their gas sensing applications have been reported recently. In these porous materials composed of assemblies of individual micro/nanostructures, the form of links or necks between individual micro/nanostructures is a critical factor to determine gas sensing properties of the material. However, a systematic study to clarify the role of links between individual micro/nanostructures in gas sensing properties of a porous metal oxide matrix is thoroughly lacking. In this work, we have demonstrated a fabrication method to prepare highly-ordered, embossed $TiO_2$ films composed of anatase $TiO_2$ hollow hemispheres via soft-templating using polystyrene beads. The form of links between hollow hemispheres could be controlled by $O_2$ plasma etching on the bead templates. This approach reveals the strong correlation of gas sensitivity with the form of the links. Our experimental results highlight that not only the surface-to-volume ratio of an ensemble material composed of individual micro/nanostructures but also the links between individual micro/nanostructures play a critical role in evaluating the sensing properties of the material. In addition to this general finding, the facileness, large-scale productivity, and compatability with semiconductor production process of the proposed fabrication method promise applications of the embossed $TiO_2$ films to high-quality sensors.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.54-59
• /
• 2006

Biophotonic sensors based on polymer waveguide with Bragg reflection grating are demonstrated in this work. Waveguide Bragg reflectors were designed by using the effective index method and the transmission matrix method. The grating pattern was formed by exposing the laser interference pattern on a photoresist. On top of the inverted rib waveguide, the Bragg reflection grating was inscribed by the O2 plasma etching. In order to perform the bio-molecule detection experiment, a calixarene molecule was self-assembled on top of thin Au film deposited on the waveguide Bragg reflector. To measure the response of the sensor, several PBS solutions with different concentrations of potassium ion from 1 pM to $100\;{\mu}M$ were dropped on the sensor surface. The shift of Bragg reflection wavelength was observed from the fabricated sensor device, which was proportional to the concentration of potassium ion ranging from 1 pM to 108 pM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.249-249
• /
• 1999

GaN과 같은 III-nitride 반도체 관한 식각 기술의 연구는 blue-emitting laser diode(LD)를 위한 경면(mirror facet)의 형성뿐만아니라 새로운 display 용도의 light emitting diodes (LED), 고온에서 작동되는 광전소자 제조 등에도 그 중요성이 증대되고 있다. 최근에는 III-nitride 물질의 높은 식각속도와 미려하고 수직한 식각형상을 이루기 위하여 ECR(Electron Cyclotron Resonance)이나 ICP(Inductively Coupled Plasma)와 같은 고밀도 플라즈마 식각과 CAIBE(Chemically assisted ion beam etching)를 이용한 연구가 진행되고 있다. 현재 제조되어 지고 있는 LED 및 LD와 같은 광소자의 구조의 대부분은 p-GaN/AlGaN/InGaN(Q.W)/AlGaN/n-GaN 와 같은 여러 층의 형태로 이루어져 있다. 이중 InGaN는 광소자나 전자소자의 특성에 영향을 주는 가장 중요한 부분으로써 현재까지 보고된 식각연구는 undoped GaN에 대부분 집중되고 있고 이에 비해 소자 특성에 핵심을 이루는 InGaN의 식각특성에 관한 연구는 미흡한 상황이다. 본 연구에서는 고밀도 플라즈마원인 ICP 장비를 이용하여 InGaN를 식각하였고, 식각에는 Cl2/CH4, Cl2/Ar 플라즈마를 사용하였다. InGaN의 식각특성에 영향을 미치는 플라즈마의 특성을 관찰하기 위하여 quadrupole mass spectrometry(QMS)와 optical emission spectroscopy(PES)를 사용하였다. 기판 온도는 5$0^{\circ}C$, 공정 압력은 5,Torr에서 30mTorr로 변화시켰고 inductive power는 200~800watt, bias voltage는 0~-200voltage로 변화시켰으며 식각마스크로는 SiO2를 patterning 하여 사용하였다. n-GaN, p-GaN 층 이외에 광소자 제조시 필수적인 InGaN 층을 100% Cl2로 식각한 경우에 InGaN의 식각속도가 GaN에 비해 매우 낮은 식각속도를 보였다. Cl2 gas에 소량의 CH4나 Ar gas를 첨가하는 경우와 공정압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%Ar 플라즈마에서 공정 압력을 감소시키는 경우 식각속도는 증가하였고, Cl2/10%CHF3 와 Cl2/10%Ar 플라즈마에서 공정압력을 15mTorr로 감소시키는 경우 InGaN과 GaNrks의 선택적인 식각이 가능하였다. InGaN의 식각속도는 Cl2/Ar 플라즈마의 이온에 의한 Cl2/CHF3(CH4) 플라즈마에서의 CHx radical 형성에 의하여 증가하는 것으로 사료되어 진다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.7-7
• /
• 2009

Lead telluride (PbTe) is a very promising thermoelectric material due to its narrow band gap (0.31 eV at 300 K), face-centered cubic structure and large average excitonic Bohr radius (46 nm) allowing for strong quantum confinement within a large range of size. In this work, we present the thermoelectric properties of individual single-crystalline PbTe nanowires grown by a vapor transport method. A combination of electron beam lithography and a lift-off process was utilized to fabricate inner micron-scaled Cr (5 nm)/Au (130 nm) electrodes of Rn (resistance of a near electrode), Rf (resistance of a far electrode) and a microheater connecting a PbTe nanowire on the grid of points. A plasma etching system was used to remove an oxide layer from the outer surface of the nanowires before the deposition of inner electrodes. The carrier concentration of the nanowire was estimated to be as high as $3.5{\times}10^{19}\;cm^{-3}$. The Seebeck coefficient of an individual PbTe nanowire with a radius of 68 nm was measured to be $S=-72{\mu}V/K$ at room temperature, which is about three times that of bulk PbTe at the same carrier concentration. Our results suggest that PbTe nanowires can be used for high-efficiency thermoelectric devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.97-97
• /
• 2010

많은 플라즈마 공정 중에 건식 식각은 복잡하고 표면반응이 잘 알려지지 않은 등의 이유로 가장 어려운 분야 중의 하나이다. 이러한 이유로 식각 장치 디자인뿐만 아니라 플라즈마를 이용한 건식 식각의 공정 조건은 수많은 시행착오를 통해 시도되어 왔다. 이런 문제들을 극복하기 위해 많은 연구자들에 의해서 다양한 방법과 tool을 이용해 모델링이 시도되고 있다. 본 연구에서는 $CF_4$ 가스를 이용한 유도결합 플라즈마에 의해 Si와 $SiO_2$를 식각하는 것을 상용 프로그램인 전산모사 유체역학 시뮬레이터인 CFD-ACE+를 이용하여 모델링했다. 150 mm 직경의 웨이퍼에 대한 모델은 식각 속도 실험결과와 비교 하였다. Ar의 경우 20 mTorr에서 13.56 MHz, 500 W인가 시 2.0 eV의 전자온도와 $7.3{\times}10^{11}\;cm^{-3}$의 전자밀도가 계산결과와 상당히 일치하게 측정되었고, $CF_4$를 이용한 $SiO_2$ 식각에서도 식각 속도가 평균 190 nm/min로 일치했고 식각 균일도는 3% 였다. 450 mm 웨이퍼 공정용 장치의 모델 계산 결과에서는 안테나와 기판의 거리, 챔버의 단면적, 기판 지지대와 배기구와의 높이 등 기하학적인 구조와 각 안테나 턴의 위치 및 전류비가 플라즈마 균일도에 많은 영향을 주었으며, 안쪽부터 4 turn이 있는 경우 2번째, 4번째 turn에만 1:4의 전류비를 인가했을 때, 수십%의 전자밀도의 불균일도를 4.7%까지 낮출 수 있었다. 또한, Si 식각에서는 식각 속도의 분포가 F radical의 분포와 같은 경향을 보임을 확인했고, $SiO_2$ 식각에서는 전자 밀도의 분포와 일치함을 확인함으로써 균일한 식각을 위해서 두 물질의 식각 공정에서는 다른 접근의 시도가 필요함을 확인했다. 플라즈마의 준중성 조건을 이용해서 Poisson 방정식을 풀지 않고 sheath를 해석적 모델로 처리하는 방법과, Poisson 식으로 정전기장을 푸는 방법을 통해서 입사 이온의 에너지 분포를 비교하였다. 에너지 범위는 80~120 eV로 같지만, 실험에서는 IED가 낮은 에너지 쪽이 더 높게 측정됐고, 계산 결과에서는 높은 에너지 쪽이 높았다.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.863-866
• /
• 1999

(Ba,Sr)$TiO_3$ thin films have attracted groat interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2$/Ar plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage = 600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2, the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is 480$\AA/min$ at 10 % $BCl_3$ adding to $Cl_2$/Ar. The characteristics of the plasmas were estimated using optical emission spectroscopy (OES). The change of Cl, B radical density measured by OES as a function of $BCl_3$ percentage in $Cl_2$/Ar. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2$/Ar. To study on the surface reaction of (Ba,Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion enhancement etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and Tic14 is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about $65\;{\sim}\;70$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.147-147
• /
• 2011

High crystalline nonpolar a-plane (11-20) nitride light emitting diodes (LEDs) have been fabricated on r-plane (1-102) sapphire substrates by metalorganic chemical-vapor deposition (MOCVD). The multi-quantum wells (MQWs) active region is consists of 4 periods the nonpolar a-plane InGaN/GaN(a-InGaN/GaN) on a high quality a-plane GaN (a-GaN) template grown by using the multibuffer layer technique. The full widths at half maximum (FWHMs) of x-ray rocking curve (XRC) obtained from phiscan of the specimen that was grown up to nonpolar a-plane GaN LED layers with double crystal x-ray diffraction. The FWHM values were decreased down to 477 arc sec for $0^{\circ}$ and 505 arc sec for $-90^{\circ}$, respectively. After fabricating a conventional lateral LED chip which size was $300{\times}600{\mu}m^2$, we measured the optical output power by on-wafer measurements. N-electrode was made with Cr/Au contact, and ITO on p-GaN was formed with Ohmic contact using Ni/Au followed by inductively coupled plasma etching for mesa isolation. The optical output power of 1.08 mW was obtained at drive current of 20 mA with the peak emission wavelength of 502 nm.

• Korean Journal of Optics and Photonics
• /
• v.22 no.5
• /
• pp.219-222
• /
• 2011

Integrated optical waveguide polarization converters are among the essential components for constructing various functional optical integrated circuits. The RM materials have been widely used in liquid crystal displays for fabricating waveplates. In this work, the polarization converters are fabricated by using a solution of Reactive Mesogen(RM) dissolved in liquid crystal(LC). In the middle of the polymer waveguide, a groove is defined by an oxygen plasma etching in a direction perpendicular to the optical waveguide. The solution of RM-LC is inserted to fill up the groove, and then liquid crystal is aligned in a certain direction by applying an electric field. After the alignment, RM materal is crosslinked by UV light so as to form a permanent waveplate. The phase retardation of the waveplate is determined by the width of the groove, and by the birefringence and the degree of alignment of the LC. Polarization conversion efficiency of 90% is obtained for the wavelength of 1550 nm.