• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.334.2-334.2
• /
• 2016

Silicon nitride (SiNx:H) films are generally used as passivation layer on solar cell and they are usually made by plasma enhanced chemical vapor deposition (PECVD). In this study, we investigated the properties of silicon nitride (SiNx:H) films made by PECVD. Effects of mixture ratio of process gases with silane (SiH4) and ammonia (NH3) on the passivation qualities of silicon nitride film are evaluated. Passivation properties of SiNx:H are focused by making antireflection properties identical with thickness and refractive index controlled. The absorption coefficient of each film was evaluated by spectrometric ellipsometery and the minority carrier lifetimes were evaluated by quasi-steady-state photo-conductance (QSSPC) measurement. The optical properties were obtained by UV-visible spectrophotometer. The interface properties were measured by capacitance-voltage (C-V) measurement and the film components were identified by Fourier transform infrared spectroscopy (FT-IR) and Rutherford backscattering spectroscopy detection (RBS) - elastic recoil detection (ERD).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.799-802
• /
• 2002

For purer images in plasma display panel, a new dielectric compositions containing neodymium oxide were studied. In the present study, Pb-based compositions were used as mother glasses (PbO-$B_2O_3-SiO_2Nd_2O_3$) and thermal, dielectric, and optical properties were measured. As a result the new dielectric with a rare-earth oxide made selectively visible light penetrated and showed especially noticeable absorption properties at 585 nm that is surely related to the erroneous gas from Ne discharge. Thus, this light purple colored glass composition will help PDP to come true to get better imaging process.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.2
• /
• pp.93-98
• /
• 1989

The study was performed to compare the dissolution, diffusion and absorption characteristics using Sartorius dissolution and absorption simulator and in vivo bioavailability of commercially available rifampicin capsules. Both brands C and F showed similar dissolution patterns and absorption properties through artificial gastric barrier in Sartorius simulator. Diffusion rate constants through the membrane of brands C and F were $3.04\;{\times}40^{-3}$ and $2.88\;{\times}\;10^{-3}cm/min$, respectively. Rifampicin capsules were administered orally to six fasted healthy volunteers according to cross-over design. The pharmacokinetic parameters between brands C and F, maximum plasma drug concentration$(C_{max})$, the time to reach $C_{max}$, absorption rate constant and area under the curve $(AUC_{0-24hr})$, elimination rate constant, and amount of drug excreted in urine were 6.11 and $7.27\;{\mu}g/ml$, 2.71 and 1.52 hr, 0.6371 and $1.6456 hr^{-1}$, 57.84 and $57.28\;{\mu}g\;{\cdot}\;hr/ml$, 0.1891 and $0.1734 hr^{-l}$, 119.98 and 119.93 mg, respectively. On the basis of experimental results, it was concluded that the bioavailability of brand C rifampicin capsules was almost the same as that of brand F rifampicin capsules.

• Journal of fish pathology
• /
• v.21 no.2
• /
• pp.107-117
• /
• 2008

The pharmacokinetic properties of oxytetracycline (OTC) were studied after dipping and oral administration to cultured olive flounder, Paralichthys olivaceus (600 g). Plasma concentrations of OTC were determined after oral dosage (50, 100 and 200 mg/kg body weight) and dipping (50, 100 and 200 ppm, 1 h) in olive flounder (average 600 g, 23±1℃). Plasma samples were taken at 3, 5, 10, 15, 24, 32, 48, 72, 120, 168 and 240 h post-dose. In oral dosage of 50, 100 and 200 mg/kg, the peak plasma concentrations of OTC, which attained at 3 h post-dose, were 0.34, 0.44 and 1.18 ㎍/㎖, respectively. In dipping of 50, 100 and 200 ppm, those of OTC which also observed at 5 h post-dose, were 0.43, 0.38 and 0.64 ㎍/㎖, respectively. Plasma concentrations of OTC were not measurable at 240 h post-dose in all experiments. The kinetic profile of absorption, distribution and elimination of OTC in plasma were analyzed fitting to a one-compartment model by WinNonlin program. The following parameters were calculated for a single dosage of 50, 100 and 200 mg/kg body weight, respectively: AUC (the area under the concentration-time curve)=31.40, 28.07 and 32.97 ㎍∙h/㎖; T1/2 (half-life)􀆫0.89, 1.12 and 0.43 h; Tmax (time for maximum concentration)= 5.25, 3.70 and 7.30 h, Cmax (maximum concentration)=0.25, 0.38 and 0.61 ㎕/㎖. Following dipping at 50, 100 and 200 ppm, these parameters were AUC􀆫15.51, 14.63 and 19.72 ㎍∙h/㎖; T1/2= 0.75, 0.41 and 0.74 h; Tmax=4.90, 7.08 and 4.68 h, Cmax=0.40, 0.32 and 0.46 ㎕/㎖.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.149-164
• /
• 2024

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blend^TM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC^TM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT^TM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.475-480
• /
• 2003

Nanocomposite of Au doped ZrO$_2$ films was prepared, which could be used as non-linear optic materials, selective absorption and transmission films. After heat treatment of prepared thin film by dip-coating method, the characteristics were investigated by X-ray diffraction, UV-VIS Spectrometer, Atomic Force Microscopy (AFM) and Scanning Electron Microscope (SEM). Film thickness was about 150 nm, the Au particle size was 15~35 nm. The thin film had a smooth surface roughness about 1.06 nm. Nonlinearity optics was found that films showed absorption peak at 600~650 nm visible region by plasma resonance of Au metal particles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.47-52
• /
• 2009

We studied the electrical characteristics of low-k SiOCH interlayer dielectric(ILD) films fabricated by plasma enhanced chemical vapor deposition (PECVD). BTMSM precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1 sccm step with the constant flow rate of 60 sccm $O_2$ in process chamber. The vibrational groups of SiOCH thin films were analyzed by FT!IR absorption lines, and the dielectric constant of the low-k SiOCH thin films were obtained by measuring C-V characteristic curves. The heat treatment on SiOCH thin films reduced the FTIR absorption intensity of the Si-O-$CH_3$ bonding group and Si-$CH_3$ bonding group but increased the intensity of Si-O-Si(C) bonding group. The SiOCH ILD films could have low dielectric constant $k\;{\simeq}\;2$ and also be reduced further by decreasing the $CH_3$ group density and increasing Si-O-Si(C) group density through annealing process.

• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.189-194
• /
• 2023

Recently, various studies on flexible electronic devices have been performed. In this study, the potential of Ag nanowires was evaluated as a material to replace the ITO transparent conductive film. Ag nanomaterials were formed on the glass by a novel brush coating method and an argon plasma evaporation method based on atmospheric pressure plasma. First, the Ag solution is coated on the glass with a brush, and the remaining solvent is removed with atmospheric plasma. During this process of solvent evaporation, a sound is generated by the reaction between the atmospheric plasma and the solvent. Therefore, the remaining amount of the solvent can be confirmed. In order to observe optical properties and electrical results such as reflectance, transmittance, and absorbance according to the number of coatings of the film, the results were analyzed by coating up to 5 times. For the purpose of investigating the interaction of light with Ag nanowires, reflectance and transmittance were measured while changing the wavelength of light from 200 nm to 800 nm. In the case of absorbance, the trend of increasing light absorption of the Ag nanowires according to the coating was clearly confirmed. The electrical properties showed a great change from the time of coating more than 4 times, and in particular, the resistance value was lower than kΩ/cm2 when the coating was applied 5 times. Based on these optical and electrical results, we plan to verify the possibility of a transparent conductive film by applying it to electronic devices in the future.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.191-196
• /
• 1999

The standard cooking method of Soondae, a famous traditional sausage type food in Korea, was proposed and the applicability of porcine plasma and egg white as the substitute of the porcine blood was investigated for the improvement of off-flavor, rancidity, and acceptability of Soondae. Sensory evaluation suggested Soondae prepared with 15% porcine blood most preferred. The cooking yields, water absorption capacity and hardness of plasma and egg white added Soondae were decreased compared with those of original porcine blood Soondae. The overall results of sensory evaluation suggested the possibility of using porcine plasma or egg white as a substitute for the porcine blood in Soondae.

• Toxicological Research
• /
• v.35 no.4
• /
• pp.295-301
• /
• 2019

In this review, we describe the absorption rates (Caco-2 cell permeability) and hepatic/plasma pharmacokinetics of 53 diverse chemicals estimated by modeling virtual oral administration in rats. To ensure that a broad range of chemical structures is present among the selected substances, the properties described by 196 chemical descriptors in a chemoinformatics tool were calculated for 50,000 randomly selected molecules in the original chemical space. To allow visualization, the resulting chemical space was projected onto a two-dimensional plane using generative topographic mapping. The calculated absorbance rates of the chemicals based on cell permeability studies were found to be inversely correlated to the no-observed-effect levels for hepatoxicity after oral administration, as obtained from the Hazard Evaluation Support System Integrated Platform in Japan (r = -0.88, p < 0.01, n = 27). The maximum plasma concentrations and the areas under the concentration-time curves (AUC) of a varied selection of chemicals were estimated using two different methods: simple one-compartment models (i.e., high-throughput toxicokinetic models) and simplified physiologically based pharmacokinetic (PBPK) modeling consisting of chemical receptor (gut), metabolizing (liver), and central (main) compartments. The results obtained from the two methods were consistent. Although the maximum concentrations and AUC values of the 53 chemicals roughly correlated in the liver and plasma, inconsistencies were apparent between empirically measured concentrations and the PBPK-modeled levels. The lowest-observed-effect levels and the virtual hepatic AUC values obtained using PBPK models were inversely correlated (r = -0.78, p < 0.05, n = 7). The present simplified PBPK models could estimate the relationships between hepatic/plasma concentrations and oral doses of general chemicals using both forward and reverse dosimetry. These methods are therefore valuable for estimating hepatotoxicity.