• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.36-45
• /
• 2000

Automated production system is composed of many complicated techniques and it become a very difficult task to control, monitor and diagnose this compound system. Moreover, it is required to develop an effective diagnosing technique and reduce the diagnosing time while operating the system in parallel under many faults occurring concurrently. This study develops a Modular Artificial Neural Network(MANN) which can perform a diagnosing function of multiple faults with the following steps: 1) Modularizing a complicated system into subsystems. 2) Formulating a hierarchical structure by dividing the subsystem into many detailed elements. 3) Planting an artificial neural network into hierarchical module. The system developed is implemented on workstation platform with $X-Windows^{(r)}$ which provides multi-process, multi-tasking and IPC facilities for visualization of transaction, by applying the software written in $ANSI-C^{(r)}$ together with $MOTIF^{(r)}$ on the fault diagnosis of PI feedback controller reactor. It can be used as a simple stepping stone towards a perfect multiple diagnosing system covering with various industrial applications, and further provides an economical approach to prevent a disastrous failure of huge complicated systems.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.13-21
• /
• 2003

China is the largest rice producer in the world, with about 28 million hectares rice-planting area. Most of the rice is consumed domestically as daily staple food, with a small proportion consumed as feed and deep-processed products. The low elastic elasticity and low profit of rice production which hampers the development of the industry, is due to the low quality of rice grain, low processing level and undeveloped rice processing technique. Promotion of high-quality species, effective quality control, adoption of modem Processing techniques, My use of low-quality indica rice, and utilization of specialty rice are considered as priorities in rice industry.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.92-95
• /
• 2011

The initial investment of rice cultivation by mechanical technique was high. This was only due to the cost of planting machine. We analysed the overall cost (without machine cost) and benefits of the two methods, it manifested that the mechanical method is very much beneficial over traditional rice cultivation technique. We observed that the requirement of soil, irrigation water, number of seeds etc. decreased in mechanical cultivation technique while net income increase by 13.07% with 80% government subsidy. Furthermore, the initial rooting was quicker, growth and development of pot raised seedlings was better than the traditional technique. Hence, this technique can give better return to the farmers with the help of government subsidy.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.148-151
• /
• 2011

본 연구의 목적은 농촌진흥청 국립원예특작과학원 감귤시험장에서 개발된 감귤 다공질 필름 멀칭재배법의 기술가치를 평가하는 것이다. 이는 농업 R&D사업의 효율성과 실용성 제고를 위하여 이용될 수 있을 것이다. 분석결과에 따르면, 감귤다공질 필름 멀칭 재배법 개발에 따른 기술가치평가액은 할인율 수준에 따라 최소 421.64억 원(할인율 10%)에서 최대 550.18억 원(할인율 6%), 평균 480.34억 원(할인율 8%)으로 추정되고, 내부수익율 IRR의 값은 가정했던 할인율(6%~10%)보다 훨씬 크고, 순현재가치(NPV)는 영보다 훨씬 크며, B/C 비율도 20 이상으로 나타나 감귤 다공질 필름 멀칭 재배법 개발사업의 경제적 타당성은 있는 것으로 판단된다.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.9-18
• /
• 2023

Harvest forecasting is the great demand of multiple aspects like temperature, rain, environment, and their relations. The existing study investigates the climate conditions and aids the cultivators to know the harvest yields before planting in farms. The proposed study uses federated learning. In addition, the additional widespread techniques such as bagging classifier, extra tees classifier, linear discriminant analysis classifier, quadratic discriminant analysis classifier, stochastic gradient boosting classifier, blending models, random forest regressor, and AdaBoost are utilized together. These presented nine algorithms achieved exemplary satisfactory accuracies. The powerful contributions of proposed algorithms can create exact harvest forecasting. Ultimately, we intend to compare our study with the earlier research's results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.4
• /
• pp.92-104
• /
• 2002

This study investigates, analyzes, and summarizes Dansplantation techniques and methods through practical methodology centering on fieldwork in order to present effective planting methods for large trees that have important significance. The conclusions are as follows : 1. The transplantation process of a large tree generally consists of the stages of digging up a tree, manufacturing a carrier frame, loading the tee on a vehicle, transporting, transplanting the tree, installing a strut and maintaining and managing the new transplant. In addition, planting a tree on a mounted place includes the primary procedures of trimming out the root, and preparing for transplanting the tree on a mounted place, as well as the secondary work of trimming out the root, transplanting a tree on a mounted place, maintenance and management. 2. In order to decide on a transplantation method for a large-sized tree, a structure calculation has to be performed first. That is, one must calculate the weight of the tree and the allowable stress of the strut (H-beam, etc.) fhst and then decide on the upper method through computer modeling based upon this structural calculation. 3. As a result of the analysis of a transplanted tree using the life soil method, it was confirmed that large quantities of feeder roots had developed around the root within a short time after the transplantation. The life soil method has proven to be very effective for transplantation of large-sized trees. 4. As for the production method of an H-beam strut frame, it was found that the manufacturing process and disassembly process were simple and proper; therefore, the H-beam frame is an appropriate structure to be used in the transplantation of large trees. 5. The concavo-convex method, which consists of filling the life soil in the concavo-convex area around the root, was found to be a method that promotes the growth of feeder roots within a short period of time and saves the supply of water at the same time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.86-92
• /
• 1992

Green buckwheat seedlings have been used as a pollution free vegetable and medicinal crop for a long time. Some of the reasons are the rapid growth rate, the high protein and rutincontent, and a more favorable ratio of leaf to stem than mature plants. Off-crop season cultivation techniques were developed for growing the young and green buckwheat vegetable of higher quality and yield, and for its increased value-added income. The effects of planting season, seeding rate, seed bed soil fertility and type, and seedling growth period on yield and rutin content were determined for vegetable and medicinal use. The young vegetable yields. in the off season culture ranged from 2.62t/ha to 22.7t /ha. The highest vegetable yield was 22.7t /ha for 25 days old seedlings grown in the polyethylene film tunnel from March 30 to April 25, 1991 where seedling rate was 360kg /ha. Buckwheat vegetable quality and income were dependent upon planting season, seeding rate, growing duration and temperature, and facilities of raising seedlings. Protein content of buck-wheat seedlings was from 21.5% to 17.2%. Rutin content of the vegetable was 53.9～31.7mg /100g for the whole plant in average. The protein and rutin content was significantly varied due to the different environmental conditions including fertility and type of seed bed soil, growing duration, temperature of the green house, and polyethylene film house and tunnel.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.56-71
• /
• 2003

Waste landfills have been the center of environmental problems and they must be restored due to environmental pollution, disgusting landscape, and cost of management. It is suggested that they be recycled urban space as cities expand. Specially, nonsanitary waste landfills which have no pollution prevention facilities cause serious problems. Restoring the landfills as parks and golf courses, so on makes more benefits because of cheap use land, closeness to urban area, flat topography applicable to parks and golf courses, and high land values after restoration and the changes to local recreation sites. Restoration of waste landfills is a complex, costly, and interdisciplinary work. But, the waste landfill is a manmade ecosystem. Control, restoration and postmanagement of waste landfills are very important problems. The role of vegetation prevents soil erosion, reduces soil water storage, and obstructs leachate seepage. Early restoration makes derelict lands into man park artificially geared to soil, vegetation, landforms and hydrology. But, Ideal restoration is to make stable ecosystem nature-friendly and compatible with surrounding landscape without more management. Landscape is structured hierarchically with patches and stands as small components and forms forest as large components. Therefore, landscape formation of the waste landfills needs much restoration process. There are many ecological restoration techniques for the waste landfills. Those are divided into artificial and natural methods. The artificial method is anthropogenic plantings while the natural method is to trigger and use succession processes. The most important thing in the restoration of waste landfills is to consider the final restoration objectives of each waste landfill. According to these objectives, the depth of covering layer, planting degree, and structural design should be determined. The effective restoration methods should be selected of artificial and natural options.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.200-204
• /
• 1999

Ligusticum chuanxiong has been an important oriental crude drug and cultivated for a long time in Korea. Ligusticum chuanxiong has been vegetatively propagating crop without seed due to its sterility and would be an allodiploid derived from the hybridization of two allied species. Generally, vegetative propagation is more costly per unit propagule than sexual(seedling) propagation. This study was conducted to find out the techniques of mass propagation by stem cutting for reduced seedling cost. When cutted on August 30 with 1st to 2nd internode, its highest rooting percentage was 81 percent. Rhizome yield of plants cutted in 50 percent on September 1 decreased to 9 percent less than control (rhizome propagation). Rooting percentage of rooted cutting plants after field planting on October 25 was the highest being 87 percent. Rhizome yield with planting appeared 127 and 120kg/10a on September 25 and October 25, respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1999.11a
• /
• pp.80-101
• /
• 1999

Self-sufficiency ratio of food crops in Korea is estimated under $20{\%}$ in 2010 because total food consumption including feed will be increased. but food grain production will be decreased. It is necessary to maintain the optimum level of food self-sufficiency rate to secure national food demand/supply balance and non-trade and multiple function of agriculture in Korea. It will be possible to produce more food grains having the acceptable quality if the appropriate policy and cropping techniques are developed and practised in future. Breeding for high yielding varieties should be the first target to raise the production potential of food crops . Number of varieties developed during last 30 years is counted as 353 in food crops. New varieties developed in 1990s showed the higher yield potential and the improved agronomic characteristics compared with 1970s and 1980s varieties. But number of varieties planted on the farmer's field over $5{\%}$ of national planting area is less than one third of total varieties developed Breeding efforts to maintain planting area of main food crops should be focussed on consumer's demand and farmer's need. They are the best quality variety in each field of crop utilization, the newly designed variety adapting to changes of natural, rural and cropping environment, and the higher yielding variety. It is also needed to develop new quality crop varieties for inducing more consumption of crop grain produced in Korea for direct food or processing. Development of barley varieties for animal feed. high income soybean varieties, high quality wheat variety. and super yielding rice and barley varieties are also needed to keep or maximize national food production potential. In order to establish the appropriate cropping technique for domestic food security, the strong and continuous interest and financial support on crop breeding are required, and the inter-disciplinary and inter-institutionary researches should be strengthened for successful crop breeding.