• 한국조경학회지
• /
• 제29권2호
• /
• pp.61-67
• /
• 2001

The purpose of this thesis was to provide the basic data for landscape architecture of apartment constructions and to minimize the users´ and builder´ loss in terms of finance and landscape due to defects in planting. After a review of literature related to defects of planting work, the researcher investigated the defects in planting of landscape plants on the basis of data from the drawing and defect-repair construction of 50 civil apartment complexes in Daegu and Kyongbook are from 1994 to 1998. The defect-ratio was analysed in terms of the species, shapes, and sizes of trees. It provides matters for consideration in terms of the design of the landscape planting on the apartment unit. It also provided the future directions for landscape architecture in apartment constructions with regard to the selection of the planting trees, etc., given statistics on defect occurrence. The causes of defect of the landscape planting trees were not studied accurately in this study due to the board range of researched area, the differences of the planting ground environment, the management ability, and the parameters of judging planting defects. It is recommended that those areas should be researched in the future.

• 한국조경학회지
• /
• 제21권4호
• /
• pp.69-82
• /
• 1994

The purpose of this study is to estimate the probable period of the planting work in consideration of weather factors. The impact degree of weather factors on the control of planting schedule was measured by the possible working days on the basis of weather condition. To establish the weather standard, the researcher analyzed the questionnaires on the manager of planting work and also the meteorological data for 10 years(1983-1992) in Seoul. The results are as follows; $\circled1$ The possible period of the planting work is from March 17 to May 18 Spring and from September 26 to December 15 in Autumn during a year. $\circled2$ The problem working days of the planting work(106-130) days per year) are less than the building construction days(174 days per year), because of handling the living material of plants, specially in summer and winter.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.125-132
• /
• 2020

The objective of this study was to analyze the axle load of a rice transplanter when planting rice seedlings at different working load conditions to select a suitable gear stage and a constant planting depth for rice seedlings. In this study, there are four levels of planting distances (26, 35, 43, and 80 cm) and three planting depths (low, medium, and high) with two gear stages (1.3 and 1.7 m/s). Axle loads and required planting pressures were analyzed statistically. It was observed that axle torques were increased with increasing planting depths for both gear stages, meaning that axle torques were directly proportional to planting depths for both gear stages. It was also observed that required planting pressures had a significant difference between planting distances. Planting pressures also showed significant difference according to gear stage and planting depth. These results indicate that planting pressures were directly proportional to both gear stage and planting depth. Results revealed that the automatic depth control system of a rice transplanter could not guarantee a constant planting depth as supplied pressures were variable. This indicates that a control algorithm is needed to ensure a constant planting depth. In the future, a control algorithm will be developed for an automatic depth control system of a rice transplanter to improve its comprehensive performance and efficiency.

• 인간식물환경학회지
• /
• 제22권5호
• /
• pp.467-480
• /
• 2019

Standard estimates are the numerical data of a unit quantity required for construction work such as the amount of materials, manpower, and the use of equipment required and are also a basis to calculate construction costs. Unfortunately, standard estimates for construction have also been used for garden construction these days as no standard estimates for garden construction have been developed or documented until now. As a result, many problems have arisen at garden construction sites since landscape construction and garden construction differ in terms of scope, size, design and construction methods. The purpose of this study was to develop standard estimates for garden construction for proper calculation of the cost of garden construction and to ensure gardens are created following appropriate construction processes. In order to develop standard estimates for garden construction, a preliminary survey was conducted on experts to understand current issues at first. After that, a questionnaire survey was done to examine problems of construction processes and ways of improvement, and on-site inspections were conducted utilizing CCTVs at construction sites to identify the actual amount of manpower required on site. Based on the results of the surveys and on-site inspections, a draft version of standard estimates for 5 types of planting work for garden construction was developed. Developing standard estimates for garden construction will serve as a stepping stone for the transparent and proper compensation for garden construction work, which will not only contribute to addressing issues between consumers and construction companies, but also to the stabilization of market economy and job creation.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.910-915
• /
• 2009

The ecohydrologic characteristics according to planting in riparian zone for the riparian restoration are analyzed in this research. The ecohydrologic components due to land use change in riparian zone from existing land cover to planted area such as pasture and wildrye are simulated in the test basin with the integrated SWAT-MODFLOW model. After analysis of change of the hydrologic properties such as surface flow, lateral flow, transpiration and soil water in riparian zone, it is revealed that soil water is one of the key factors and planting of wildrye can increase soil water in riparian zone. The simulation performance of the SWAT-MODFLOW model is validated in this study and it is expected that this model can be used to evaluate various riparian restoration scenarios.

• 한국환경복원기술학회지
• /
• 제10권5호
• /
• pp.31-39
• /
• 2007

This study was carried out to evaluation the recycled waste soils from construction site for planting soil. For this purpose, the concentrations of polluted materials and the physico-chemical properties were measured at recycled soil samples of an industrial waste treating company in the Metropolitan landfill area. The concentrations of polluted materials did not exceed to the standard critical levels of soil pollution in all analyzed items. The measures of the samples soil texture (loamy sand), bulk density (1.09~1.32g/$cm^3$), saturated hydraulic conductivity ($1.6{\times}10^{-3}{\sim}1.8{\times}10^{-3}$cm/sec), solid phase distribution (0.4~0.5$m^3/m^3$), porosity (0.5~0.6$m^3/m^3$), Ex. $K^+$ (1.0~1.2cmol/kg), Ex. $Mg^{2+}$ (0.2~0.6cmol/kg) were identified as not worse than those of conventional planting soil. But the sample soils have serious problems for planting soil such as high levels of pH (9.6~11.5), EC (0.78~1.84ds/m) and Ex. $Ca^{2+}$ (25.6~34.5cmol/kg), low level of organic matter (0.2~0.3%). It is required to improve pH, EC and Ex. $Ca^{2+}$ of sample soils. Consequently, the results suggested a high potential of recycling of the wastes soils for planting soil.

• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.16-23
• /
• 2002

우리나라의 건설공사 현장에서는 해마다 수백만톤의 콘크리트 폐기물이 배출되고 있다. 이를 효율적으로 재활용할 경우는 환경파괴를 방지할 뿐만 아니라 경제적으로도 큰 효과를 기대할 수 있다. 하지만 기존의 콘크리트 폐기물에 관한 재활용 방법으로는 성토, 잡석다짐, 매립 등의 일부용도에만 사용될 뿐 폭넓게 활용하기에는 한계가 있었다. 따라서 본 연구에서는 골재로 재활용할 수 있는 다양한 종류의 건축폐기물을 환경친화적인 식재용 콘크리트에 이용하여 강도, 내구성 등의 물리적 특성을 검토하였다. 연구결과, 재생골재를 이용한 식재용 콘크리트의 물성은 부순돌에 비하여 압축강도, 동결융해 저항성면에서는 다소 불량하게 나타났지만, 흡수율과 열전도율면에서는 우수한 효과도 입증되었고, 특히 콘크리트 폐기물의 효율적인 재활용 측면을 고려한다면 식재용 콘크리트로의 활용가치는 충분이 있는 것으로 사료된다.

• 인간식물환경학회지
• /
• 제23권3호
• /
• pp.347-362
• /
• 2020

Background and objective: It is difficult to conclusively determine the exact cause of tree defects since multiple causes are involved such as climate change, plantation, tree quality and planting time, construction, planting base, drainage, sunshine conditions, maintenance, and microclimate. The data related to landscaping construction defects are scattered or fragmented by companies and years, but not managed systematically by the defect information management system. Most of the earlier studies associated with tree defects in apartment complexes suggested defect rates after examining tree defects in the completed construction site and proposed fragmentary and subjective conclusions about the causes of defects observed in trees with high defect rates. It is proposed to continue to conduct studies on the establishment and analysis of systematic databases to identify the exact causes of tree defects and measures to improve, and the need to accumulate systematic data in the construction process where many defects arises. This study was conducted to reduce the defects of trees planted in apartment complexes. Methods: Main factors related to tree defects were subdivided based on the results of literature review and a defect investigation at the completion site, and tree history management items were selected and subdivided during the construction stage. Results: The criteria for the preparation of subdivided items were obtained, and the tree history management checklist was written for the site under actual construction and a systematic database was established. Items that are categorized based to the causes of defects include the location of nurseries, date, tree quality, site conditions, planting techniques, microclimates, and maintenance. Conclusion: This study suggested tree history management items based on the tree defects that can be identified at the construction stage and applied them to the selected study site, which differentiates this study from earlier studies. It will be necessary to conduct a comprehensive and objective time series analysis on tree defects that occur over time by continuously monitoring and collecting data after construction.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.

• 한국조경학회지
• /
• 제43권6호
• /
• pp.150-159
• /
• 2015

본 연구는 우리나라의 대표적 아파트단지 조성 공공기관인 'J'공사를 대상으로 조경 식재 및 시설물 공종별 공사비 산정 비율 및 그들의 경년변화 특성 분석을 통해 향후 보다 합리적인 조경공사비 산정을 위한 기초 자료 제시를 목적으로 수행하였다. 연구의 대상 및 자료는 2004년부터 2012년까지 수행한 수도권 아파트단지 37개 현장의 조경식재 및 시설물 공사비를 대상으로 하였다. 경년변화 특성 분석을 위해 기술분석, 상관분석 등 통계분석 방법을 사용하였으며 다음과 같은 결론이 도출되었다. 첫째, 2004년부터 2012년까지 9년간 시행된 조경공사 비용 중 식재공사비와 시설물공사비의 평균 비율은 56.1% 대 43.9%인 것으로 나타났다. 둘째, 식재공사와 시설물공사 모두 약 ${\pm}3%$의 변동 폭에 국한되고 있어 물가상승률 등을 감안하며 거의 상대적 변화가 없는 특징을 보이고 있었다. 셋째, 조경공사 공종별 공사비 투입에서는 최소 ${\pm}1%$에서 최대 ${\pm}5%$의 변동폭(變動幅)을 보임으로써 조경공사비에서는 시설물공사비가 경년별 변화의 폭이 상대적으로 높은 특징을 보이는 것으로 나타났다. 넷째, 이상과 같이 경년별, 조경공종별 조경공사비의 비율이 일괄적으로 나타나는 것은 아파트단지의 지역적 특성과 입지여건 등의 조건을 반영하지 못하는 한계가 있었음을 알 수 있었다. 다섯째, 조경공종별 조경 요소별 상관관계가 높게 나타남으로써 전체적인 공사비 틀 안에서 공사비간의 부분적 조정을 통해 전체 조경공사비를 통제하고 있는 것으로 나타났다. 이상의 결과는 조경공사비가 이용자들의 만족이나, 아파트단지의 여건 등의 환경적 특성과 상관없이 획일적으로 책정되고 있다는 문제점을 제시하고 있었다.