• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.333-336
• /
• 2012

In modern Construction Industry, as accumulation of capital and improvement of technology skills, buildings are becoming higher and more enormous, also the portion of steel works has been increasing. In addition, it is necessary to predict the optimum level of construction cost in a reasonable way. The composition of construction is direct construction cost, indirect construction cost and so on. However, it is not enough to study about indirect construction cost rather than direct construction cost. In this study, the state of productivity and indirect construction cost are analyzed in the steel production. As a result, the productivity and ratio of indirect cost in steel plant by inserted per 1ton are suggested.

• 한국건설관리학회논문집
• /
• 제20권5호
• /
• pp.125-136
• /
• 2019

본 연구는 국내 대형 건설 기업이 수행한 124건의 해외사업에 대해 입찰 전 예측 리스크, 수주 후 실제 리스크, 예비비 반영률, 원가 상승률 등을 조사하였다. 이를 기반으로 플랜트, 건축, 토목 공종별 예측 리스크 수준, 실제 리스크 수준, 입찰 전 예측 리스크와 예비비 간 관계, 실제 리스크와 원가 상승률의 상관성을 분석하여 다음과 같은 결론을 얻었다. 첫째, 플랜트와 토목 사업은 건축 사업에 비해 예측 리스크와 실제 리스크 수준이 높았다. 특히, 플랜트와 토목 사업에서는 국가 리스크가 가장 높았으나 건축사업에서는 프로젝트 리스크가 가장 높았던 것으로 나타났다. 둘째, 플랜트와 토목 사업이 건축 사업보다 예비비를 많이 설정하였으나 입찰 전 예측 리스크 수준과는 상관성이 없었다. 이는 우리 기업의 예비비 산정에 문제가 있음을 내포하고 있다. 셋째, 세 개 공종 모두 실제 리스크 발생 수준과 원가 상승률 사이에 유의미한 상관성이 존재하는 것으로 나타났다. 이는 리스크 관리가 실행원가 관리에 중요한 요소임을 보여준다. 본 연구에서 도출된 결과는 국내 기업들의 공종별로 차별화된 보다 실전적인 리스크 관리를 지원할 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.294-295
• /
• 2018

Nowadays, the construction industry utilizes 3D models in the designing process, on which research is being conducted to establish an automated system for project cost estimation in connection with information related to construction such as material unit costs and wages, beyond the level of design interference review and construction quantity estimation. In this process, the project cost is estimated in connection with unit price data after takeoff the quantity based on the 3D model attributes and data types. A way to reduce cost and risk would be first developing prototypes of some of essential buildings and works, comparing and validating the outcomes, and then extending to the whole scope, because estimates differ on the basis of the scope and level of 3D design models as well as the data accuracy. This study analyzes case studies of project cost estimation by computing the quantity on the basis of 3D model in the construction industry and explores methodologies and management measures applicable for estimating nuclear power plant construction project costs.

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.603-608
• /
• 2009

Activated sludge sewage treatment processes are difficult to be controlled because of their complex and nonlinear behaviour, however, the control of the dissolved oxygen level in the reactors plays an important role in the operation of the facility. For this reason, this study is designed to present a system which accurately measures DO, MLSS, pH and ORP in the aeration tank to alleviate situations above and provide the automatization of a sewage treatment plant (STP) using new DO control system. The automatic control systems must be guaranteed the accuracy. Therefore, the proposed automatic DO control system in this study could be commercial applications in the aeration tanks by means of operating cost analysis and user-friendly for operation and maintenance. We could get accurate data from the lab tank which has water quality checker because there was no vortex and air bubble during the measurement process. Improvement of confidence in the lab tank enabled effective and automatic operation of sewage treatment plants so that operation costs and manpower could be saved. If this result is put in place in every sewage treatment plant nationwide for practical purposes, it is estimated to cost 18.5 million dollars in installing the lab tank and to save 9.8 million dollars in management cost a year, except for cost saved by automation.

• 플랜트 저널
• /
• 제8권4호
• /
• pp.45-54
• /
• 2012

석탄화력발전소의 건설사업비를 국내 500 MW급 석탄화력발전소를 대상으로 확률적 모의실험 방법인 몬테카를로 시뮬레이션을 통해 추정하였다. 물가상승률을 적용한 실적 건설사업비에 확률적 모의실험 이론을 적용하였고, 전산 모사 소프트웨어를 통하여 건설사업비를 추정하였다. 확률적 모의실험을 통한 국내 500 MW급 석탄화력발전소의 총 건설사업비는 2011년 12월 불변가 기준, 신뢰수준 95%에서 인접발전소가 없는 경우 약 1조 8,700억 원에서 2조 3,300억 원이며 토목공사의 비중과 민감도가 높은 것으로 나타났고, 인접발전소가 있는 경우 약 1조 2,400억 원에서 1조 5,900억 원이며 기자재비의 비중과 민감도가 높으며, 건설사업비 추정시 물가상승률을 적용해야 적합한 결과가 도출되는 것으로 나타났다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.197-197
• /
• 1999

• 자원ㆍ환경경제연구
• /
• 제23권3호
• /
• pp.497-513
• /
• 2014

비용을 보상하는 원가규제 방식으로 알려진 투자보수율 규제 또는 총괄원가주의 규제의 경우 피규제자는 비용을 부풀리려는 유인을 갖게 마련이다. 그런데 생산공장별 원가를 규제자가 파악하고 이들 간의 경쟁을 유도하는 경우에는 단기적으로 '수인의 딜레마' 상황이 나타나 원가 과대보고와는 방향이 다른 원가 과소보고 방향으로의 비용왜곡 요인이 발생할 수 있다. 변동비 반영 전력시장의 경우 발전기의 운전시간이 늘어날수록 실제변동비와 등록변동비 간의 차이는 점점 커지게 되지만 복합화력 발전사들은 가동률과 발전량을 높게 유지하기 위해 등록변동비를 유지시키려는 전략적 선택을 할 수 있다. 그 결과 궁극적으로 수익성이 악화되고 신규설비에 대한 투자를 유도하지 못하며 설비예비율은 적정 이하로 떨어지는 '수인의 딜레마' 상황이 나타날 수 있다. 이에 따라 발전사들의 자기변동비가 실제 효율과 유사하도록 관련 규정을 개정할 필요가 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.871-878
• /
• 2000

Exergetic and thermoeconomic analysis were performed for a 500-MW combined cycle plant and a 137-MW steam power plant without decomposition of exergy stream of matter into thermal and mechanical exergies. The calculated costs of electricity are almost same within 0.5% as those obtained by the thermoeconomic method with decomposition of exergy into thermal and mechanical exergies of the combined cycle plant. However for the gas-turbine cogeneration plant having different kinds of products. the difference in the unit costs of products, obtained from the two methodologies is about 2%. Such outcome indicates that the level at which the cost balances are formulated does not affect the result of thermoeconomic analysis, that is somewhat contradictory to that concluded previously.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.382-392
• /
• 2021

In recent years, floating offshore wind turbines have attracted more attention as a new renewable energy resource while bottom-fixed offshore wind turbines reach their limit of water depth. Various projects have been proposed with the rapid increase in installed floating wind power capacity, but the economic aspect remains as a biggest issue. To figure out sensible approaches for saving costs, a comparison analysis of the levelized cost of electricity (LCOE) between floating and bottom-fixed offshore wind turbines was carried out. The LCOE was reviewed from a social perspective and a cost breakdown and a literature review analysis were used to itemize the costs into its various components in each level of power plant and system integration. The results show that the highest proportion in capital expenditure of a floating offshore wind turbine results in the substructure part, which is the main difference from a bottom-fixed wind turbine. A floating offshore wind turbine was found to have several advantages over a bottom-fixed wind turbine. Although a similarity in operation and maintenance cost structure is revealed, a floating wind turbine still has the benefit of being able to be maintained at a seaport. After emphasizing the cost-reduction advantages of a floating wind turbine, its LCOE outlook is provided to give a brief overview in the following years. Finally, some estimated cost drivers, such as economics of scale, wind turbine rating, a floater with mooring system, and grid connection cost, are outlined as proposals for floating wind LCOE reduction.

• 플랜트 저널
• /
• 제7권3호
• /
• pp.48-64
• /
• 2011

In this work, risks in EPC project for overseas power plant projects are analyzed and risk management methods are suggested to reduce cost and to shorten time. 79% of risks occurred in the engineering phase for S project located in South-East Asia. The impact scales of risks on major project objectives which are cost, time, scope, and quality are analyzed as 3.5, 3.8, 2.7, and 3.7, respectively. The level of impact scales is very similar to each other except the impact scale of scope. The risk management methods suggested in this study have to be applied at the appropriate time to manage risks effectively. After that, risks are managed continuously by monitoring.