• 한국약용작물학회지
• /
• 제20권3호
• /
• pp.184-189
• /
• 2012

This study was carried out to have the basic and applied informations relating to increase the productivity and quality of ginseng. 2 years-old ginseng was cultivated under hydroponic culture with the controlled environment conditions in a greenhouse. Major growth characters and yields were investigated with two different temperatures and several growth stages. The plant height and stem diameter were higher at low temperature than those at high temperature. They were not clearly different with six different growth stages. The root length was not clearly different between two temperatures; however it was continuously grown from June until August. The root diameter was higher at low temperature than that at high temperature. It was rapidly increased from June until August. The length, width, and area of leaf were higher at low temperature than those at high temperature. The fresh and dry weights of different plant tissues were also heavier at low temperature than those at high temperature. The moisture content of ginseng root was continuously decreased from June until August. The yield of ginseng was higher at low temperature compared to that at high temperature. The cultivating conditions in hydroponic culture of ginseng, especially temperature, would be an important factor to have better growth and production.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2006-2011
• /
• 2010

The superheater in the thermal power plant makes the wet steam into the dry steam with high temperature and high pressure by using the boiler heat. The dry steam pressure rotates the turbine-generator system. The efficiency and life time of the boiler heavily depends on the steam temperature regulation. The steam temperature can be deviated from the reference by the MW demand of the power plant. It is therefore required that the PI(proportional-integral) controller should be robust against the disturbance such as the MW demand. In this paper, the PI controller with the integral state predictor is proposed and applied to regulate the steam temperature of the superheater, and it is compared with the conventional PI controller operated in the thermal power plant in view of control performance.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2000년도 추계 학술발표회
• /
• pp.15.1-15
• /
• 2000

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2022-2027
• /
• 2009

An supercritical once through boiler system has been used in the korea standard-type thermal power plant. It is critical in boiler operation that superheater temperature should be controlled within the specified limit. In this paper, control logic scheme is suggested for superheater temperature in once through boiler. Finally the simulation result using process model based simulator shows the validity of suggested control logic.

• Journal of Biosystems Engineering
• /
• 제31권5호
• /
• pp.449-453
• /
• 2006

Effect of light quality on plant temperatures at joining parts of grafted watermelon seedlings was investigated using a thermal imaging system in this study. Plant temperatures at joining parts lowered than those at stem region during graft-taking. However, difference in plant temperatures at joining parts and at stem region decreased by days after graft-taking. Plant temperatures of grafted seedlings graft-taken under white, blue, red, and blue + red fluorescent lamps repeatedly fluctuated high at photoperiod and low at dark period. Considering the variation of plant temperatures at joining pa퍼5, the illumination of blue and red light as well as white light will be effective for grafting of grafted watermelon seedlings. It is recommended that air temperature around grafted seedlings should be maintained at 27 to $29^{\circ}C$ for enhancing the physiological reaction of callus and for the smooth joining of scion and rootstock.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.837-841
• /
• 2001

Almost all power plant boiler has temperature distribution nonuniformity problem in heat transfer tube flow path. It can cause hot spot damage of superheated or reheated heat transfer section and reduce maintenance schedule when nonuniformity is severe. There are two solutions for improvement temperature nonuniformity. one is change of gas flow distribution of gas path and the other is contorl steam flow in tube bank. Of course, first method is very difficulty to apply but second method is'nt. In this paper, control steam flow is used to solve temperature nonuniformity of power plant boiler.

• 한국자원식물학회지
• /
• 제25권3호
• /
• pp.323-328
• /
• 2012

This paper describes the potential use of deep sea water to stimulate seed germination in both common and Tartary buckwheat. Treatment of 10% deep sea water at $25^{\circ}C$ would slightly enhance germination of buckwheat seeds compared to non-DSW treatment and other temperature. In this study, the significant effects of photoperiod and temperature on seedling growth were also found in the HL treatment for the number of leaf, plant height, and plant fresh weight and LL treatment for root length and leaf size. Common buckwheat (Suwon No.1) showed higher rate (93%) of flowering plants in the HS and LL (93% of flowering rates) than those revealed in the HS and LS treatment, while the low percentage(67%) of plant flowering plants was shown in the LS treatment. All plants (100%) of a Korean landrace, Ahndong-jaerae showed flowers in the HS and LS treatment. HL and LL treatment status did not occur in the plant's flowering. Any Tartary buckwheat (KW45) plant did not yet flowered when it was 21 days-old.

• 환경생물
• /
• 제34권4호
• /
• pp.272-280
• /
• 2016

Changes in land use and increase in urban energy consumption influence urban life. This study analyzed the characteristics and patterns of urban heat and presents management schemes to generate a comfortable and sustainable urban environment. The study aimed to demonstrate the positive effects of artificial ground greening on improving the microclimate through evapotranspiration using perennial herbs. We have designed a chamber that could control constant temperature and humidity, measure temperature reductions in each plant and changes in sensible heat and latent heat. This study identified Sedum kamtschaticum as the most effective plant in controlling temperature. At $22^{\circ}C$, $3.2^{\circ}C$ temperature reduction was observed, whereas four other plants showed a $1.5^{\circ}C$ reduction. At $25^{\circ}C$, $2.0^{\circ}C$ temperature reduction was observed. On the other hand, the use of Sedum sarmentosum resulted in the lowest effect. Zoysia japonica is the most commonly used ground covering plant, although the temperature reduction of Lysimachia nummularia was more effective at high temperature conditions. Sensible heat and latent heat were calculated to evaluate the thermal performance of energy. At a temperature >$30^{\circ}C$, L. nummularia and S. sarmentosum emitted high latent heat. In this study, we analyzed the thermal performance of green roof perennial plants; in particular, we analyzed the evapotranspiration and temperature reduction of each plant. Since the substrate depth and types, plant species, and seasonal change may influence temperature reduction and latent heat of green roofs, further studies are necessary.

• 한국약용작물학회지
• /
• 제20권5호
• /
• pp.393-397
• /
• 2012

This study was investigated seed germination of Rheum undulatum L. depends on storage temperature (-20, $5^{\circ}C$ and room temperature), germination temperature (5, 15, 25 and $40^{\circ}C$) and a soaking treatment (no soaking, 2 days and 4 days). There was not much difference from the germination rate of R. undulatum L. in storage temperature conditions for 8 weeks. The highest of germination rate occurred over 80 percentage at $25^{\circ}C$. When R. undulatum L. was soaked with tap water for four days, the average values of germination velocity and germination day were represented of 1.7 ea/day and 1.68 days. These results may help our understanding of variations in germination characteristics for R. undulatum L. seeds treated under various germination conditions.

• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.51-59
• /
• 2013

High temperature fuel cell system, such as molten carbonate fuel cells(MCFC) and solid oxide fuel cells(SOFC), are capable of operating at MW rated power output. The power output change of high temperature fuel cell imposes the thermal and mechanical stresses on the fuel cell stack. To minimize the thermal-mechanical stresses on the stack, increases in the power output of high temperature fuel cell typically must be made at a slow rate. So, the short time interruption of high temperature fuel cell causes considerable generated energy losses. Because of the characteristic of high temperature fuel cell, we analyzed the impact of electrical fault in the fuel cell plant on other fuel cell generators in the same plant site. A various grounding configuration and voltage sag are analyzed. Finally, we presented the solution to minimize the effect of fault on other fuel cell generators.