• 제목/요약/키워드: Plant specimens

검색결과 456건 처리시간 0.028초

낙동강하구 을숙도 갯벌에서 새섬매자기의 생육 특성 (Growth Characteristics of Bolboschoenus planiculmis on the Eulsuk Tidal Flat of the Nakdong River Estuary, Korea)

  • 김구연
    • 생태와환경
    • /
    • 제53권4호
    • /
    • pp.453-460
    • /
    • 2020
  • Bolboschoenus planiculmis is an important prey species for winter migratory birds in the Nakdong River Estuary region, but its population has declined in the last decade due to a physio-chemical shift. To identify the growth and development characteristics of B. planiculmis, we carried out an experimental survey on the aboveground and belowground sections of B. planiculmis specimens in the Eulsuk tidal flat from April to September 2019. We divided the belowground area into two groups: a vegetation group in which B. planiculmis exists and a non-vegetation group in which B. planiculmis does not exist and measured the rate of tubers. We observed a 45% appearance frequency in the vegetation group and only a 5% frequency in the non-vegetation group, indicating that there were no supplies for plant growth. The mean density, length, and biomass of B. planiculmis aboveground were 166.90±149.62 n m-2, 44.39±5.45 cm, and 67.63±54.46 g DW m-2, respectively, which was approximately half of those obtained from the study in the Eulsuk tidal flat in 2002. Tuber number was the highest in the 15~25 cm deep layer(41.50%). The mean number of total tubers belowground was related to different sediment conditions(FS: flat surface, DS: disturbed surface) 251.75±16.86 n pot-1 for FS and 171.00±25.18 n pot-1 for DS, which was significantly different(total tubers: p<0.005). The mean biomass of B. planiculmis above-ground was 21.11±1.60 g DW pot-1 for FS and 15.41±1.38 g DW pot-1 for DS, which was significantly different(p<0.05). This research provides primary materials for the restoration of the Nakdong River Estuary, wintering sites for migratory birds, and protection of B. planiculmis.

동결 삼축압축시험을 통한 동결 사질토의 온도 및 구속압력에 따른 역학적 특성 평가 (Evaluation of the Mechanical Characteristics of Frozen Sand, Considering Temperature and Confining Pressure Effects, in a Cryogenic Triaxial Compression Test)

  • 박상영;정상훈;황채민;최항석
    • 한국지반공학회논문집
    • /
    • 제38권8호
    • /
    • pp.7-15
    • /
    • 2022
  • 대부분의 선행연구는 동결 삼축압축시험 수행 시, 몰드를 사용하여 시료를 조성하고 단방향으로 동결을 진행하였다. 이는 동결된 시료에 잔류응력이 발생할 가능성이 있기 때문에 인공동결공법이 적용된 지반을 모사하는데 한계가 있다. 본 연구에서는 기존 시험방법의 한계를 보완할 수 있는 시험장비 및 시험방법을 제안하고, 제안된 방법으로 온도 및 구속압력에 따른 동결 사질토의 역학적 특성을 평가하였다. 동결온도가 낮아질수록 동결 사질토는 취성이 증가하였고, 부동수분의 감소 및 얼음자체의 강도 증가로 인하여 강도가 증가하였다. 구속압력의 증가는 강도저감 효과를 발생시키는 압력융해 현상과 강도증진 효과를 발생시키는 흙 입자의 마찰력 증가 모두를 야기하였다. 이처럼 동결 사질토의 역학적 거동은 구속압력과 동결온도의 복합적인 영향을 받는 것으로 나타났다.

열화된 CrMoV 주조강에 대한 보수 용접 방법 및 후열처리 특성 평가 (Evaluation of Repair Welding Method and PWHT Properties for Degraded CrMoV Casting Steel)

  • 홍재훈;전문창;정권석;이영국
    • 열처리공학회지
    • /
    • 제35권3호
    • /
    • pp.121-129
    • /
    • 2022
  • Recently the growth of the renewable energy production has caused the flexible operation in LNG combined cycle power plant. Due to the rapid start and stop operations, large CrMoV castings used for turbine casings and valve bodies could be distorted and lead to replacement or welding repair. This study was performed to find out the characteristics of the repair welding for a damaged CrMoV casting steel. A typical field repair method (arc & TIG welding) was applied to making specimens. The degraded N2 packing head sample from the steam turbine was used. The evaluations of weldments were carried out in terms of microstructural characterization, microhardness measurements, tensile, creep-rupture and fatigue tests. Color etching was also applied for better understanding of welding microstructures. As the boundary between HAZ and base material was deteriorated by welding, it caused microstructural changes formed during PWHT and the shortening of the remaining residual life. By comparing the properties according to repair welding method, it was possible to derive what important welding factors were. As a result, arc welding method is more suitable for repair welding on CrMoV castings.

Prediction of stress intensity factor range for API 5L grade X65 steel by using GPR and MPMR

  • Murthy, A. Ramachandra;Vishnuvardhan, S.;Saravanan, M.;Gandhi, P.
    • Structural Engineering and Mechanics
    • /
    • 제81권5호
    • /
    • pp.565-574
    • /
    • 2022
  • The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

C.S.G 공법의 실내 배합설계 (Laboratory Mix Design of C.S.G Method)

  • 김기영;전제성;김용성
    • 한국지반공학회논문집
    • /
    • 제22권5호
    • /
    • pp.27-37
    • /
    • 2006
  • 최근 일본 및 선진외국에서는 C.S.G(Cemented Sand and Gravel) 재료를 활용한 시공공법이 점차 증가하고 있다. 특히 본 댐과 가물막이 댐의 축조공법으로 그 적용성을 인정받고 있는 C.S.G 공법은 댐 축조에 필요한 채석장 개발과 플랜트 건설에 투입되는 제반경비를 줄일 수 있을 뿐 아니라, 석산개발에 따른 환경훼손을 방지할 수 있게 됨으로써 경제성과 환경적 측면에서 기존의 댐 축조공법에 비하여 유리한 측면이 있다. 본 연구에서는 토질 역학적 개념에 기초한 C.S.G 공법의 배합설계 절차를 시료 선별과정, 다짐시험 방법, 표준 공시체의 제작방법 그리고 배합비의 결정순으로 살펴보고 일축압축시험 및 대형 삼축압축시험을 통해 얻어진 응력-변형특성 및 단위시멘트량에 따른 강도 및 탄성계수의 변화를 고찰하고 그 상관식을 제안하였다.

매립장 석탄회의 긴급복구용 CLSM으로 활용 가능성 (Feasibility Study on CLSM for Emergency Recovery of Landfill Bottom Ash)

  • 김하석;김기석
    • 토지주택연구
    • /
    • 제14권2호
    • /
    • pp.137-145
    • /
    • 2023
  • 본 연구에서는 매립석탄재를 이용한 CLSM의 실질적인 기술개발의 일환으로 매립석탄재의 입도분포 및 미립자 함량 등 물성에 따른 CLSM의 유동성, 블리딩 속도, 강도 등의 특성을 검토하였다. 그 결과 채취한 매립석탄재는 밀도 특성과 입도 분포가 다른 것으로 나타났으며 비산재의 양이 많고 혼합수를 많이 첨가한 시편의 경우 블리딩 비율이 기준을 만족하지 못하였고 압축강도 시험 결과, 4시간 동안 0.5MPa 이상의 강도발현은 단위결합재량이 200 이상인 반수석고를 사용한 시편의 경우 만족스러운 것으로 나타났다. 나머지 석고는 강도발현이 불량한 것으로 나타나 매립석탄재는 CLSM 소재로 활용이 가능할 것으로 판단되나 각 발전사의 회처리장에 매립된 석탄재의 물리화학적 특성을 규명하고 적용할 필요가 있다.

Service life evaluation of HPC with increasing surface chlorides from field data in different sea conditions

  • Jong-Suk Lee;Keun-Hyeok Yang;Yong-Sik Yoon;Jin-Won Nam;Seug-Jun Kwon
    • Advances in concrete construction
    • /
    • 제16권3호
    • /
    • pp.155-167
    • /
    • 2023
  • The penetrated chloride in concrete has different behavior with mix proportions and local exposure conditions, even in the same environments, so that it is very important to quantify surface chloride contents for durability design. As well known, the surface chloride content which is a key parameter like external loading in structural safety design increases with exposure period. In this study, concrete samples containing OPC (Ordinary Portland Cement), GGBFS (Ground Granulated Blast Furnace Slag), and FA (Fly Ash) had been exposed to submerged, tidal, and splash area for 5 years, then the surface chloride contents changing with exposure period were evaluated. The surface chloride contents were obtained from the chloride profile based on the Fick's 2nd Law, and the regression analysis for them was performed with exponential and square root function. After exposure period of 5 years in submerged and tidal area conditions, the surface chloride content of OPC concrete increased to 6.4 kg/m3 - 7.3 kg/m3, and the surface chloride content of GGBFS concrete was evaluated as 7.3 kg/m3 - 11.5 kg/m3. In the higher replacement ratio of GGBFS, the higher surface chloride contents were evaluated. The surface chloride content in FA concrete showed a range of 6.7 kg/m3 to 9.9 kg/m3, which was the intermediate level of OPC and GGBFS concrete. In the case of splash area, the surface chloride contents in all specimens were from 0.59 kg/m3 to 0.75 kg/m3, which was the lowest of all exposure conditions. Experimental constants available for durability design of chloride ingress were derived through regression analysis over exposure period. In the concrete with GGBFS replacement ratio of 50%, the increase rate of surface chloride contents decreased rapidly as the water to binder ratio increased.

원주.횡성 지역의 식물상 (Flora of Wonju-Hoengseong Area)

  • 고성철;손동찬;김현종;황희숙;신영화
    • 한국자원식물학회지
    • /
    • 제22권5호
    • /
    • pp.365-380
    • /
    • 2009
  • 강원도 서남부에 위치하고 있는 원주시와 횡성군에 소재하고 있는 치악산(1,288 m), 태기산(1,261.4 m), 오봉산(1,126.2 m), 응봉산(1,094.9 m), 어답산(789.4 m), 덕고산(521.2 m), 덕가산(700.5 m), 성지봉(791 m)의 관속식물상을 2008년 4월부터 2009년 5월까지 총 23회에 걸쳐 조사하였고, 이전 조사에서 증거표본이 제시되어 있는 발교산(998.4 m), 오음산(930.4 m), 백운산(1,037.1 m), 치악산(1,288 m)의 자료를 전체 소산식물목록에 포함시켰다. 본 조사에서 생육이 확인된 관속식물의 총 분류군 수는 97과 383속 680종 1아종 111변종 12품종으로 총 804분류군이었으며, 문헌상 증거표본이 있는 경우의 자료를 추가하면 총 105과 418속 818종 1아종 138변종 16품종으로 총 973분류군으로 한반도 전체관속식물종의 21.14%에 해당된다. 조사지 전반의 식생은 소나무와 낙엽활엽수의 혼효림이며, 식생이 비교적 우수한 지역은 치악산의 구룡사로 부터 세렴폭포를 거쳐 비로봉에 이르는 계곡, 및 태기산의 큰성골계곡과 태기분교터에서 낙수대에 이르는 능선의 동사면 지역이다. 비교적 많은 분류군이 채집된 10개 과는 국화과, 벼과, 장미과, 미나리아재비과, 콩과, 사초과, 백합과, 범의귀과, 산형과, 꿀풀과의 순이며 전체 생육분류군의 49.12%이다. 조사지에서 생육이 확인된 특산식물은 금강초롱꽃, 모데미풀, Pyrus ussuriensis var. diamanti-ca Uyeki(금강산돌배)를 포함하는 38분류군이고, 산림청지정 희귀 및 멸종위기식물은 금강초롱꽃, 왕제비꽃, Viola diamantica Nakai(금강제비꽃), 금마타리를 포함하는 24분류군이며, 환경부지정 식물구계학적특정식물종은 총 88분류군으로서 Ⅴ등급에 속하는 식물은 좀가물고사리, 금강초롱꽃, 물쇠뜨기, 노랑붓꽃, 솔나리, 큰연영초, 목련(식재), 천마, 좀미역고사리, 승마, 모데미풀, 왕제비꽃의 12분류군이다. 또한 귀화식물은 47분류군으로서 전체식물의 4.83%, 유용식물은 총 609분류군으로서 식용식물 334분류군, 약용식물 269분류군, 관상용식물 127분류군, 사료식물 332분류군, 산업용식물 3분류군, 목재용식물 31분류군, 섬유용식물 13분류군으로 각각 구분되고, 이는 전체식물의 13.23%에 해당한다.

인삼 모상근 프로테옴 데이터 분석 : 인삼 EST database와의 통합 분석에 의한 단백질 동정 (Proteome Data Analysis of Hairy Root of Panax ginseng : Use of Expressed Sequence Tag Data of Ginseng for the Protein Identification)

  • 권경훈;김승일;김경욱;김은아;조건;김진영;김영환;양덕춘;허철구;유종신;박영목
    • Journal of Plant Biotechnology
    • /
    • 제29권3호
    • /
    • pp.161-170
    • /
    • 2002
  • 인삼 모상근의 프로테옴 분석에 의해 얻은 질량분석 스펙트럼 데이터는 MALDI/TOF/MS에서 얻는 질량 스펙트럼과 ESI/Q-TOF/MS에서 얻는 탄뎀 질량 스펙트럼으로 구분된다. 질량 스펙트럼은 단백질이 효소에 의해 분해된 펩타이드들의 분자량 정보를 제공하며, 탄뎀 질량 스펙트럼에서는 아미노산 단위로 분해된 절편 단백질의 분자량으로부터 아미노산 서열을 결과로 얻는다. 펩타이드의 아미노산 서열을 BLAST로 검색하면 유사한 단백질을 GenBank에서 검색할 수 있다. 이러한 단백질 동정 방법은 완전한 유전체 서열이 알려진 생물체의 경우 높은 정확도로 단백질을 동정할 수 있으나, 그렇지 않은 경우는 유사한 단백질이 데이터베이스에 존재하지 않아 분석이 용이하지 않다. 본 연구에서는 질량 스펙트럼 및 절편 단백질의 아미노산 서열을 EST (expressed sequence tag) 서열과 비교하여 프로테옴 데이터와 일치하는 EST 서열을 찾아내고 이를 BLAST검색에 의해 단백질 동정에 활용하였다. ESI/Q-TOF/MS 에서 얻은 아미노산 서열은 길이는 짧지만 데이터의 신뢰도가 높으므로 EST 서열과의 연관 관계를 밝힘으로써 단백질에 대한 정보를 보완할 수 있었다. ESI/Q-TOF/MS에서 얻은 펩타이드의 아미노산 서열을 EST 서열과 비교한 결과 90%의 아미노산 서열이 EST DB에서 발견되었다. NCBI의 nr 데이터베이스에서 아미노산 서열을 검색하여 찾은 단백질이 68%임에 비하여, 인삼 EST 서열에 의한 검색이 22% 더 많은 결과를 얻었다. MALDI/TOF/MS의 질량 스펙트럼에서 nr 데이터베이스로 검색한 결과와 인삼 EST 데이터베이스를 검색한 결과가 일치하는 경우는 47개 중 9개인 19%에 불과하여, 탄뎀 질량 분석으로 아미노산 서열을 얻지 않고, 단지 질량 스펙트럼으로부터 단백질을 동정하는 방법으로는 단백질 동정의 정확한 결과를 기대하기 어려움을 확인하였다.

우라늄화합물로 오염된 금속폐기물의 전해제염 (Electrochemical Decontamination of Metallic Wastes Contaminated with Uranium Compounds)

  • 양영미;최왕규;오원진;유승곤
    • 방사성폐기물학회지
    • /
    • 제1권1호
    • /
    • pp.11-23
    • /
    • 2003
  • 국내의 가동 중지된 우라늄 변환시설의 해체 시 우라늄 화합물로 오염되어 대량으로 발생될 금속폐기물의 재활용 또는 자체처분을 위한 제염기술로 전해제염 공정의 적용성을 평가하였다. 이를 위하여 우라늄 변환시설 내부설비의 주 구성 재료인 SUS-304 와 Inconel-600 금속시편을 대상으로 전해용해 실험을 수행하였다. SUS-304 와 Inconel-600 금속시편에 대한 전해용해 성능에 있어서 중성염 전해용액으로 $Na_2$SO$_4$가 가장 효과적이었으나, 우라늄변환시설의 가동 시 질산 매질과 주로 접촉했던 설비 표면의 이력과 시설 가동 중 발생한 우라늄 폐액의 성상을 고려하여 $Na_2$SO$_4$ 전해용액 내에서의 SUS-304 시편에 대한 전해용해와 비교해서 약 30%, 그리고 Inconel-600 시편에 대해서는 거의 동등한 성능을 보인 NaNO$_3$ 중성염 용액을 금속성폐기물의 전해제염 용액으로 선정하였다. 본 연구에서는 NaNO$_3$ 중성염 전해용액에서 전류밀도, 전해시간 및 전해 용액의 농도가 SUS-304 및 Inconel-600 금속시편의 전해용해 성능에 미치는 영향을 조사하였다. 이 실험결과를 바탕으로 실제 우라늄 변환시설로부터 인출하여 $UO_2$, AUC 및 ADU 등의 우라늄 화합물로 오염된 시편에 대해 전류밀도 100mA/$\textrm{cm}^2$, IM NaNO$_3$ 전해용액 내에서 전해 제염 실증시험을 수행하였으며, 오염물의 종류 및 오염준위의 대소와는 관계없이 모든 시편에 대하여 10분 이내의 짧은 시간 내에 자체처분 기준치 이하로 $\alpha$$\beta$ 방사능 준위를 감소시킴으로써 본 중성염 전해제염이 매우 성공적임을 확인하였다.nely regimented hierarchical language. I try, in this paper, to develop the idea that hierarchical regimentation of Korean language uses is not humane. 1 of for the main argument for the thesis as what follows: How could one justify the hierarchical regimentation of a language like Korean\ulcorner Only if there is an essential structure in which the fine grades of differences of social positions of all the people are distinct; The essentialism here involved is not plausible. And I may add that language is to be used fur the purposes of communication, rationalization and expression. If true, language use is a genuine art of liberation or humanization. Any overt hierarchical language tends to damage those purposes and more to enforce those oppressive elements already existing in the community. Then, a hierarchical language is to defeat its own purpose.중 행정부가 북한에 대해 실시한 포용정책이 어떠한 성과를 거두고 어떠한 문제점을 간과하고 있는가에 대해 논의하고, 대북 정책의 새로운 지평을 논의하는 것을 목적으로 하고 있다. 1) 포용 정책은

  • PDF