• 한국자원식물학회지
• /
• 제32권1호
• /
• pp.86-107
• /
• 2019

본 연구는 전라남도 여수시 돌산읍에 위치하는 돌산도의 관속식물상을 조사하고 분포가 확인된 주요 식물에 대해 논의하였다. 현지조사는 2017년부터 2018년까지 총 15회에 걸쳐 수행되었으며, 이에 대한 증거표본은 국립수목원 산림생물표본관(KH)에 소장하였다. 분포가 확인된 관속식물은 113과 338속 517종 1아종 49변종 3품종 총 570분류군이다. 이중 한국특산식물은 개족도리풀 등 18분류군을 확인되었으며, 환경부지정 식물구계학적특정식물종은 V-I등급으로 총 90분류군이 조사되었다. 희귀식물은 위기종(EN)인 백양꽃1분류군을 포함하여 총 4분류군이며, 적색목록에 속하는 관속식물은 취약종(VU) 갯취 등 총 8분류군이다.

• Mycobiology
• /
• 제47권2호
• /
• pp.191-199
• /
• 2019

Most of lichens are formed by Ascomycota, less than 1% are lichenized Basidiomycota. The flora investigation of lichenized Ascomycota of South Korea has been well studied in the past three decades; however, prior to this study, none of basidiolichens was discovered. During the recent excursion, an unexpected clavarioid basidiolichen, Sulzbacheromyces sinensis was collected. Morphology and ecology has been recorded in detail. DNA was extracted, and ITS, 18S, 28S nuclear rDNA were generated. In order to further confirm the systematic position of the Korean specimens, maximum likelihood and Bayesian inference analysis including all the species of the order Lepidostromatales were conducted based on the ITS. As a result, the phylogenetic tree of the order Lepidostromatales was reconstructed, which differed from the previous studies. The inferred phylogenetic tree showed that species of Sulzbacheromyces in three different continents (Asia, South Africa and South America) were separated into three clades with support. In this study, the species worldwide distribution map of Lepidostromatales was illustrated, and S. sinensis had a widest distribution range (paleotropical extend to the Sino-Japanese) than other species (paleotropical or neotropical). Prior to this study, the range of distribution, southernmost and northernmost points and the fruiting time of S. sinensis were recorded, and the genus Sulzbacheromyces was firstly reported from Korean peninsula and Philippines.

• 식물분류학회지
• /
• 제49권2호
• /
• pp.179-197
• /
• 2019

전라남도 고흥군에 위치하는 외나로도의 관속식물상을 조사하고 분포가 확인된 주요식물에 대해 논의하였다. 2015년 3월부터 2017년 10월까지 3년 동안 총 21회의 현지조사에서 확보된 표본에 근거하여 관속식물목록을 작성하였고, 국립생물자원관 표본관(KB)과 대전대 생물학과 표본실(TUT)에 수장하였다. 본 조사에서 생육이 확인된 관속식물은 122과 364속 538종 6아종 41변종 2품종의 총 587분류군이다. 멸종위기야생생물로는 혹난초, 지네발란, 대흥란, 석곡 4분류군을 확인하였다. 한반도고유종은 변산바람꽃, 해변싸리, 거제물봉선 등 14분류군이었고, 식물구계학적 특정식물로는 V등급 4분류군, IV등급 4분류군, III등급 47분류군, II등급 18분류군, I등급 64분류군으로 총 137분류군이 조사되었다. 적색식물목록종으로는 위급종(critically endangered) 꽃꿩의다리를 포함하여16분류군을 확인하였다. 귀화식물로는 가시상추, 물참새피 등 46분류군이 조사되었다.

• 식물분류학회지
• /
• 제51권4호
• /
• pp.378-385
• /
• 2021

제주도에서 보고된 해변취는 일반적으로 큰각시취의 이명으로 인식되고 있으나, 한반도의 큰각시취와는 다른 식물이라는 견해가 상존한다. 큰각시취는 총포편의 선단에 옅은 보라색의 건막질 부속체가 있는 이년생 초본으로 취나물속의 깃분취아절(sect. Theodorea)에 속하며, 형태적으로 유사한 분류군인 각시취와 함께 우리나라 전역에 분포하는 것으로 알려져 있다. 해변취의 실체를 확인하기 위해 제주도의 해변취 자생지와 일본 규슈의 큰각시취 자생지에서 채집 및 조사를 하였다. 형태적 유연관계를 확인하기 위해 본 연구에서 채집된 표본과 국립수목원(KH), 전남대학교 표본실(CNU), 토쿄대학 표본실(TI) 소장 큰각시취 및 각시취 표본을 비교 분석하였다. 해변취는 일본 규슈의 큰각시취와 형태적 및 생태적으로 구별되지 않아서 큰각시취의 이명으로 처리하였다. 식물종의 분포에 있어서 기존 견해와 달리 한반도에는 각시취만 분포하며, 제주도에는 큰각시취만 분포한다.

• 대한본초학회지
• /
• 제34권6호
• /
• pp.63-70
• /
• 2019

Objective : Arnebiae Radix, the roots of Arnebia euchroma (Royle) Johnst. or A. guttata Bunge, is a well-known traditional herbal medicine in East Asia. In the Korean Pharmacopoeia, three authentic species, including two Arnebia and Lithospermum erythrorhizon Sieb. et Zucc. have recognized as a Lithospermi Radix. But, the morphological and taxonomic information of two authentic Arnebia species lacks date since their distribution and difficulty of accessing the natural habitats. Methods : A full description of the external morphological characteristics of vegetative and reproductive organs in the original plants was carried out using digital calipers and stereoscope. For providing their taxonomic and nomenclatural synonyms, we reviewed various plant checklists and taxonomic literature. Results : This study provides taxonomic information of A. euchroma and A. guttata based on a morphological examination of authentic plant individuals and field observations. Detailed descriptions of the two Arnebia species, major quantitative and qualitative characteristics, nomenclatural reviews, distribution maps, and lists of voucher specimens examined are provided. The shape of leaves, root length, stem number, calyx length and pubescence as well as corolla color were useful characteristics for identification. Moreover, we confirmed that A. euchroma and A. guttata are clearly heterostylous species. Conclusion : Our research provides valuable basic information that could be used as quality control for distinguishing between Arnebiae Radix and its adulterants. These results will help in the understanding of authentic plants and also provide the verified materials and voucher information.

• The Journal of Advanced Prosthodontics
• /
• 제15권4호
• /
• pp.189-201
• /
• 2023

PURPOSE. The aim of this study was to investigate the mechanical properties of three-dimensional (3D) printed denture base resin incorporating microcapsules containing plant essential oils. MATERIALS AND METHODS. Denture base specimens containing up to 3% w/v essential oil microcapsule powders (MCPs), i.e., eucalyptus, geranium, lavender, menthol, and tea tree, in two resins (Detax and NextDent 3D+) were 3D printed using two printers (Asiga and NextDent 5100). The dispersion and interaction of the MCPs in the resin were assessed by SEM while the mechanical properties of the incorporated denture base including flexural strength (MPa), flexural modulus (MPa), Vickers hardness (VHN), and surface roughness (Ra) were also subsequently evaluated. Statistical analysis of any differences in mean values was determined using a two-way ANOVA with Tukey's post hoc testing (α = .05). RESULTS. The spherical shape of the MCPs was maintained during the mixing and polymerization/printing process. However, the Detax-Asiga group showed significant agglomeration of the MCPs even at the lowest MCP concentration levels (0.5% w/v). Overall, as the microcapsule concentration increased, the mean flexural strength decreased, though the menthol MCP groups remained compliant with the ISO standard. The flexural modulus and harness remained relatively unchanged, and the flexural modulus complied with the ISO standard regardless of the MCP concentration. Surface roughness increased with the addition of the MCPs but also remained below that required for clinical acceptance. CONCLUSION. Incorporation of microencapsulated plant essential oils into 3D printed denture base resin was successfully achieved. While incorporation negatively influenced flexural strength and surface roughness, little effect on flexural modulus and Vickers hardness was demonstrated.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2020년도 춘계학술대회
• /
• pp.27-27
• /
• 2020

Daphne L. (Thymelaceae) comprises about 95 species distributing worldwide from N Africa, N India, SE Asia to E Asia and the coast of the Mediterranean of Europe. In Korea, five species of this genus have been described. In this study, we included four species (D. genkwa, D. pseudomezereum, D. kiusiana, D. jejudoensis) from Korea, excluding cultivated D. odora. The morphological characters through local surveys and the re-classification of the specimens collected in the Korea National Herbarium (KH) were carried out and distribution maps for each taxon were also prepared. The major characters include habit, trichomes in winter bud, leaf, and twig, phyllotaxis, inflorescence, size of calyx lobe and trichomes in the calyx tube, etc. The distribution map showed that D. genkwa is mainly distributed in the coastal area of Hwanghaenam-do, Pyeongannam-do, Jeollabuk-do and Jeollanam-do, whereas D. pseudomezereum is distributed in the limestone zone of Gangwon-do, Jeollabuk-do, and Gyeongsangbuk-do. Similarly, D. kiusiana is mostly found in Jeollanam-do, Gyeongsangnam-do, and Jeju-do. In addition, D. jejudoensis is known to be distributed in forests of Murueng, Andeok, and Seonheul-ri in Jeju-do, but recently, new habitat is discovered in the island forest areas of Jeollanam-do. However, some of these individuals showed the characteristics of D. kiusiana, thus before come to any conclusion detailed taxonomic review of D. jejudoensis and D. kiusiana is required.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제4권4호
• /
• pp.146-153
• /
• 2023

This study aimed to conduct a comprehensive survey of social wasp diversity and its impacts on remote Ulleungdo Island, South Korea. A total of 12 wasp traps were placed across the island, and specimens were collected monthly from May to October. Additional collection was conducted by thoroughly inspecting the areas surrounding the traps. The traps yielded a total of 5,068 individuals, representing two genera and two species. A total of 3,961 Vespa simillima simillima Smith individuals (78.2%) were collected, and 1,107 individuals (21.8%) were identified as Vespula flaviceps flaviceps Smith. Additionally, five individuals of Polistes snelleni de Saussure were collected through sweeping, bringing the total to 5,132 individuals of three genera and three species. It is worth noting that our findings indicate potential misidentifications in the species list of Vespidae found in the literature. Emergency services call centers reported the removal of 60 social wasp nests on Ulleungdo Island between 2018 and 2022, with the highest number of reports occurring from July to September, accounting for 87% of all cases. Dodong-ri and Jeodong-ri, with the highest populations, reported the most incidents, although fortunately, there have been no recent injuries. Past incidents involving the destruction of dried squid products by Vespula species have resulted in significant economic losses, underscoring the need for preventative measures. Furthermore, ongoing surveillance of hornet invasions is essential to safeguard the Jangwon bees being reared on Ulleungdo Island.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.400-408
• /
• 2003

A study on the progressive inelastic deformation behavior of the 316 L stainless steel cylindrical structure with plate-to-shell junction under moving temperature front was carried out by structural test and analysis. The structural test intends to simulate the thermal ratcheting behavior occurring at the reactor baffle of the liquid metal reactor as free surface of hot sodium pool moves up and down under plant transients. The thermal ratchet load that heats the specimen up to 550$^{\circ}C$ was applied repeatedly and residual deformation was measured. The thermal ratcheting test was carried out with two types of cylindrical structures, one with plate to-shell junction and the other without the junction to investigate the effects of the geometric discontinuities on the global ratcheting deformation. The temperature distributions of the test specimens were measured and were used for the ratcheting analysis. The ratchet deformations were analyzed with the constitutive equation of the non-linear combined hardening model. The analysis results were in good agreement with those of the structural tests.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.100-107
• /
• 1999

Due to the high temperature and pressure, the materials of pipeline in power plant are degraded by creep damage. So far, many conventional measurement techniques such as replica method, electric resistance method, adn hardness test method for creep damage have been used. Among them, the replica method has mainly been used for the inspection of components. But this technique is restricted to the applications at the surface of the objects and cannot be used to material inside. In this paper, the measuring methods of evaluation by using ultrasonic attenuation and electric resistance for the creep detection of creep damage in the form of cavities on grain boundaries or intergranular microcracks were carried out. Absolute measuring method of quantitave ultrasonic attenuation technique for 1Cr0.5Mo material degradation was analyzed for determining the creep degradation steps using life prediction formula. As a result of measurement for creep specimens, we founded that the coefficient of utrasonic attenuation was increased as the increase of creep life fracton(${phi}c$) and the decreasing rate of wlwctric resistance was also increased.