• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.453-460
• /
• 2020

Bolboschoenus planiculmis is an important prey species for winter migratory birds in the Nakdong River Estuary region, but its population has declined in the last decade due to a physio-chemical shift. To identify the growth and development characteristics of B. planiculmis, we carried out an experimental survey on the aboveground and belowground sections of B. planiculmis specimens in the Eulsuk tidal flat from April to September 2019. We divided the belowground area into two groups: a vegetation group in which B. planiculmis exists and a non-vegetation group in which B. planiculmis does not exist and measured the rate of tubers. We observed a 45% appearance frequency in the vegetation group and only a 5% frequency in the non-vegetation group, indicating that there were no supplies for plant growth. The mean density, length, and biomass of B. planiculmis aboveground were 166.90±149.62 n m^-2, 44.39±5.45 cm, and 67.63±54.46 g DW m^-2, respectively, which was approximately half of those obtained from the study in the Eulsuk tidal flat in 2002. Tuber number was the highest in the 15~25 cm deep layer(41.50%). The mean number of total tubers belowground was related to different sediment conditions(FS: flat surface, DS: disturbed surface) 251.75±16.86 n pot^-1 for FS and 171.00±25.18 n pot^-1 for DS, which was significantly different(total tubers: p<0.005). The mean biomass of B. planiculmis above-ground was 21.11±1.60 g DW pot^-1 for FS and 15.41±1.38 g DW pot^-1 for DS, which was significantly different(p<0.05). This research provides primary materials for the restoration of the Nakdong River Estuary, wintering sites for migratory birds, and protection of B. planiculmis.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.7-15
• /
• 2022

Most studies have conducted cryogenic triaxial compression tests with frozen specimens prepared in a separate mold by one-directional freezing. This method has the potential to generate residual stress in a frozen specimen and cannot be adopted to simulate the application of the artificial ground freezing method in the field. Therefore, in this study, novel equipment and procedure for the cryogenic triaxial compression test were proposed to overcome the limitations of existing test methods. Therefore, the mechanical characteristics of frozen sand, considering the effect of temperature and confining pressure, were evaluated. As the freezing temperature decreased, the brittleness of frozen sand increased, and the strength increased due to a decrease in the unfrozen water content and an increase in the ice strength. A higher confining pressure resulted in an increase in interparticle friction and the pressure melting phenomenon, which caused strength reduction. Thus, it was found that the mechanical behaviors of frozen sand were simultaneously affected by both temperature and confining pressure.

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.3
• /
• pp.121-129
• /
• 2022

Recently the growth of the renewable energy production has caused the flexible operation in LNG combined cycle power plant. Due to the rapid start and stop operations, large CrMoV castings used for turbine casings and valve bodies could be distorted and lead to replacement or welding repair. This study was performed to find out the characteristics of the repair welding for a damaged CrMoV casting steel. A typical field repair method (arc & TIG welding) was applied to making specimens. The degraded N2 packing head sample from the steam turbine was used. The evaluations of weldments were carried out in terms of microstructural characterization, microhardness measurements, tensile, creep-rupture and fatigue tests. Color etching was also applied for better understanding of welding microstructures. As the boundary between HAZ and base material was deteriorated by welding, it caused microstructural changes formed during PWHT and the shortening of the remaining residual life. By comparing the properties according to repair welding method, it was possible to derive what important welding factors were. As a result, arc welding method is more suitable for repair welding on CrMoV castings.

• Structural Engineering and Mechanics
• /
• v.81 no.5
• /
• pp.565-574
• /
• 2022

The infrastructures such as offshore, bridges, power plant, oil and gas piping and aircraft operate in a harsh environment during their service life. Structural integrity of engineering components used in these industries is paramount for the reliability and economics of operation. Two regression models based on the concept of Gaussian process regression (GPR) and Minimax probability machine regression (MPMR) were developed to predict stress intensity factor range (𝚫K). Both GPR and MPMR are in the frame work of probability distribution. Models were developed by using the fatigue crack growth data in MATLAB by appropriately modifying the tools. Fatigue crack growth experiments were carried out on Eccentrically-loaded Single Edge notch Tension (ESE(T)) specimens made of API 5L X65 Grade steel in inert and corrosive environments (2.0% and 3.5% NaCl). The experiments were carried out under constant amplitude cyclic loading with a stress ratio of 0.1 and 5.0 Hz frequency (inert environment), 0.5 Hz frequency (corrosive environment). Crack growth rate (da/dN) and stress intensity factor range (𝚫K) values were evaluated at incremental values of loading cycle and crack length. About 70 to 75% of the data has been used for training and the remaining for validation of the models. It is observed that the predicted SIF range is in good agreement with the corresponding experimental observations. Further, the performance of the models was assessed with several statistical parameters, namely, Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Coefficient of Efficiency (E), Root Mean Square Error to Observation's Standard Deviation Ratio (RSR), Normalized Mean Bias Error (NMBE), Performance Index (ρ) and Variance Account Factor (VAF).

• Journal of the Korean Geotechnical Society
• /
• v.22 no.5
• /
• pp.27-37
• /
• 2006

Cemented Sand and Gravel (C.S.G) method has become increasingly popular in Japan and throughout the world as a construction method and material. This method is favorably used for cofferdam and large dam because a quarry and aggregate plant facility can be diminished. Also, this method can reduce construction cost, work duration and destruction of environment. In this paper, a methodology for C.S.G mix design based on so-called soil mechanics approach is proposed for trapezoid-shaped dam. The methodology consists of selection of a suitable aggregate, introduction of compaction method, processing to prepare standard specimens, and determination of mix portions. Also, unconfined compressive strength tests and large triaxial compression tests are performed. From the results of the test, correlation equation among strength, elastic modulus and unit cement is proposed.

• Land and Housing Review
• /
• v.14 no.2
• /
• pp.137-145
• /
• 2023

In this study, the characteristics such as flowability, bleeding rate, and strength of the CLSM (Controlled Low Strength Material) according to physical properties such as particle size distribution and particulate content of the pond ash were investigated as part of the practical development of technology for CLSM using pond ash. As a result of analyzing the properties of the collected pond ash, it was found that the density and particle size distribution characteristics were different. And that the bleeding ratio did not satisfy the standard in the case of the specimen with a large amount of fly ash and a lot of addition of mixing water. As a result of the compressive strength test, the strength development of 0.5 MPa or more for four hours was found to be satisfactory for the specimens using hemihydrate gypsum with a unit binder amount of 200 or more, and the remaining gypsum showed poor strength development. Although it was determined that landfill coal ash can be used as a CLSM material, it is necessary to identify and apply the physical and chemical characteristics of coal ash buried in the ash treatment plant of each power generation company.

• Advances in concrete construction
• /
• v.16 no.3
• /
• pp.155-167
• /
• 2023

The penetrated chloride in concrete has different behavior with mix proportions and local exposure conditions, even in the same environments, so that it is very important to quantify surface chloride contents for durability design. As well known, the surface chloride content which is a key parameter like external loading in structural safety design increases with exposure period. In this study, concrete samples containing OPC (Ordinary Portland Cement), GGBFS (Ground Granulated Blast Furnace Slag), and FA (Fly Ash) had been exposed to submerged, tidal, and splash area for 5 years, then the surface chloride contents changing with exposure period were evaluated. The surface chloride contents were obtained from the chloride profile based on the Fick's 2nd Law, and the regression analysis for them was performed with exponential and square root function. After exposure period of 5 years in submerged and tidal area conditions, the surface chloride content of OPC concrete increased to 6.4 kg/m³ - 7.3 kg/m³, and the surface chloride content of GGBFS concrete was evaluated as 7.3 kg/m³ - 11.5 kg/m³. In the higher replacement ratio of GGBFS, the higher surface chloride contents were evaluated. The surface chloride content in FA concrete showed a range of 6.7 kg/m³ to 9.9 kg/m³, which was the intermediate level of OPC and GGBFS concrete. In the case of splash area, the surface chloride contents in all specimens were from 0.59 kg/m³ to 0.75 kg/m³, which was the lowest of all exposure conditions. Experimental constants available for durability design of chloride ingress were derived through regression analysis over exposure period. In the concrete with GGBFS replacement ratio of 50%, the increase rate of surface chloride contents decreased rapidly as the water to binder ratio increased.

• Korean Journal of Plant Resources
• /
• v.22 no.5
• /
• pp.365-380
• /
• 2009

Flora of vascular plants in mountains located at Wonju-si and Hoengseong-gun areas such as Chiak-san(1,288m), Taegi-san(1,261.4m), Obong-san(1,126.2m), Eungbong-san(1,094.9m), Eodab-san(789.4m), Deokgo-san(521.2m), Deokga-san(700.5m) and Seongji-bong(791m) was investigated from April, 2008 to May, 2009, and results from the previous researches in which voucher specimens had been presented from Balgyo-san(998.4m), Oeum-san(930.4m), Baekun-san(1,037.1m) and Chiak-san(1,288m) were included in the list of vascular plants from these areas. This investigations resulted in 804 taxa consisted of 680 species, 1 subspecies, 111 varieties, and 12 forms of 383 genera under 97 families, and totally in 973 taxa (21.14% of all vascular plants in Korea) of 818 species, 1 subspecies, 138 varieties and 16 forms of 418 genera under 105 families on addition of voucher specimens in the previous researches. Forests of the investigated areas were generally mixed of Pinus densiflora and deciduous trees. The areas with comparatively excellent vegetation were valley from Guryong-sa (temple) to Biro-bong (summit) via Seryeom-pokpo (fall) in Mt. Chiak-san, and Keunseong-gol (valley) and eastern slope from Taegibungyo-teo to Naksu-dae (fall) in Mt. Taegi-san. 10 families with abundantly collected species were Compositae, Graminae, Rosaceae, Ranunculaceae, Leguminosae, Cyperaceae, Liliaceae, Saxifragaceae, Umbelliferae and Labiatae in order, and they occuied 49.12% of all collected taxa. Endemic plants found in these areas were 38 taxa including Hanabusaya asiatica, Megaleranthis saniculifolia, and Pyrus ussuriensis var. diamantica, and rare and endangered ones were 24 taxa including Hanabusaya asiatica, Viola websteri, Viola diamantica, and Patrina saniculaefolia. Specially designated plants by the Ministry of Environment were 88 taxa including 12 taxa of 5th degree such as Woodsia intermedia, Hanabusaya asiatica, Equisetum pratense, Iris koreana, Lilium cernum, Trillium tschonoskii, Magnolia kobus(cultivated), Gastrodia elata, Polypodium virginianum, Cimicifuga heracleifolia, Megaleranthis saniculifolia and Viola websteri. 47 taxa of alien plants were found. As to 609 taxa (13.23% of all vascular plants in Korea) of useful plants, 334 taxa for the edible, 269 taxa for the medicinal, 127 taxa for the ornamental, 332 taxa for the forage, 3 taxa for the industrial raw material, 31 taxa for the timber and 13 taxa for the fiber were classified, respectively.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.161-170
• /
• 2002

For the hairy root of Panax ginseng, we have got mass spectrums from MALDI/TOF/MS analysis and Tandem mass spectrums from ESI/Q-TOF/MS analysis. While mass spectrum provides the molecular weights of peptide fragments digested by protease such as trypsin, tandem mass spectrum produces amino acid sequence of digested peptides. Each amino acid sequences can be a query sequence in BLAST search to identify proteins. For the specimens of animals or plants of which genome sequences were known, we can easily identify expressed proteins from mass spectrums with high accuracy. However, for the other specimens such as ginseng, it is difficult to identify proteins with accuracy since all the protein sequences are not available yet. Here we compared the mass spectrums and the peptide amino acid sequences with ginseng expressed sequence tag (EST) DB. The matched EST sequence was used as a query in BLAST search for protein identification. They could offer the correct protein information by the sequence alignment with EST sequences. 90% of peptide sequences of ESI/Q-TOF/MS are matched with EST sequences. Comparing 68% matches of the same sequences with the nr database of NCBI, we got more matches by 22% from ginseng EST sequence search. In case of peptide mass fingerprinting from MALDI/TOF/MS, only about 19% (9 proteins of 47 spots) among peptide matches from nr DB were correlated with ginseng EST DB. From these results, we suggest that amino acid sequencing using tandem mass spectrum analysis may be necessary for protein identification in ginseng proteome analysis.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.1 no.1
• /
• pp.11-23
• /
• 2003

A study on the electrolytic dissolution of SUS-304 and Inconel-600 specimen was carried out in neutral salt electrolyte to evaluate the applicability of electrochemical decontamination process for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant in Korea. Although the best electrolytic dissolution performance for the specimens was observed in a Na2s04 electrolyte, a NaNO$_3$ neutral salt electrolyte, in which about 30% for SUS-304 and the same for Inconel-600 in the weight loss was shown in comparison with that in a Na$_2$SO$_4$ solution, was selected as an electrolyte for the electrochemical decontamination of metallic wastes with the consideration on the surface of system components contacted with nitric acid and the compatibility with lagoon wastes generated during the facility operation. The effects of current density, electrolytic dissolution time, and concentration of NaNO$_3$ on the electrolytic dissolution of the specimens were investigated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as UO$_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion facility were performed in 1M NaNO$_3$ solution with the current density or In mA/$\textrm{cm}^2$. it was verified that the electrochemical decontamination of the metallic wastes contaminated uranium compounds was quite successful in a NaNO$_3$ neutral salt electrolyte by reducing $\alpha$ and $\beta$ radioactivities below the level of self disposal within 10 minutes regardless of the type of contaminants and the degree of contamination.