• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.439-448
• /
• 2011

Oxalic acid is synthesized by a wide range of plants. A few of them are forage plants that can cause oxalate poisoning in ruminants under certain conditions. In this paper, the role of some agronomic, climatic and genetic factors in minimizing oxalate accumulation in forage plants has been discussed. Research indicates that the content of oxalate in forage can be controlled by fertilizer application. For example, nitrate application resulted in higher contents of soluble and insoluble oxalates than ammonium application. With an increased rate of potassium application, soluble oxalate content showed an increasing trend and insoluble oxalate content showed a decreasing trend. With an increased rate of calcium application, soluble oxalate content showed a decreasing trend and insoluble oxalate content showed a reverse trend. Other agronomic factors such as growing season, harvesting practices, plant maturity, plant species, plant variety and plant parts can also have a large effect on oxalate accumulation. However, the potential benefits of the above approaches for improving forage quality have not been fully exploited. In addition, there is still insufficient information to fully utilize means (e.g. plant nutrients, season and soil moisture) to minimize oxalate accumulation in forage plants. Therefore, more research is required for a better understanding of the interactions between oxalate and the above-mentioned factors in forage plants.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.4 no.1
• /
• pp.52-54
• /
• 2006

Datura stramonium is a wild growing plant, consumption of which can result in severe toxicity. It contains a variety alkaloids include atropine, hyoscamine, and scopolamine that can all cause anticholonergic poisoning. It has been use of herb medicine in Korea. Side effects from ingesting Datura stramonium include dry mouth, blurred vision, photophobia, and may be followed by hyperthermia, confusion, agitation, hallucination, and aggressive behavior. In severe toxicity, it can cause seizure, coma, life-threatening arrhythmia, and death. We experienced one patient who developed stupor mentality caused by Datura stramonium. Severe presentation, especially mental change of Datura stramonium should draw attention. Poisoning associated with Datura stramonium can be prevented through educational public health program.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.11 no.2
• /
• pp.130-132
• /
• 2013

Distinguishing wild plants in spring from ingestible plants is difficult. Differentiation of budding plants from other plants is particularly difficult. Many people want to find edible plants for health during the spring season. Scopolia japonica can cause symptoms of mania. The author experienced three cases of poisoning by Scopolia japonica. We reported on the cases with literature reviews.

• Nuclear Engineering and Technology
• /
• v.52 no.11
• /
• pp.2652-2659
• /
• 2020

The methyl iodide (CH₃I) removal performance of tri-ethylene-di-amine impregnated activated carbon (TEDA-AC) used in the air cleaning unit of nuclear power plants (NPPs) should be maintained at least 99% between 24 month-performance test period. In order for evaluating the effectiveness of TEDA-AC on the removal performance of CH₃I in nuclear power plant during the operation of NPPs, the long-term test for up to 15 months was carried out under the simulated operating conditions (e.g., 25 ℃, RH 50%, ppb level poisoning gases injection) at nuclear power plants (NPPs). The TEDA-AC samples were analyzed with the Brunauer-Emmett-Teller (BET) specific surface area and TEDA content as well as CH₃I penetration test. It is clearly evident that more than 99% of CH₃I removal performance of TEDA-AC was observed in the TEDA-AC samples during 15 months of long-term operation under the simulated NPP operating conditions including the ppb level of organic and oxide form of poisoning gases. BET specific surface area and TEDA content that can affect the CH₃I removal performance of TEDA-AC were also maintained as those in new TEDA-AC during 15 months of long-term operation.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.15 no.1
• /
• pp.50-56
• /
• 2014

The prevalence rate of plant poisoning is growing up gradually. However, it could be difficult to get proper treatment without detail medical history taking due to the diversity of poisonous plants and their various symptoms. Scopolia Japonica, which grows naturally in Korea, is reported to cause severe toxicity which could be lethal. A few therapeutic measures have been reported in Traditional Korean Medicine (TKM), but it has not been reported yet that those measures have been successfully proven in the clinical practice in modern times. This is a case report of toxicity caused by scopolia japonica ingestion. A 65years-old male patient with cognitive impairment, behavioral disorder, gait difficulty, dysarthria, dysphagia and abnormal pupil reflex recovered from those symptoms during taking Gamigamdu-tang and getting acupuncture. This study shows the clinical aspects of Scopolia Japonica toxicity and the possibility of TKM treatments as one of plant poisoning treatments.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.100-100
• /
• 2022

Hovenia dulcis is a herbal plant, which belongs to the Rhamnaceae family and is a native of Japan, China and Korea. Its fruit stalk is called 'Jiguja' in Korea. It has been traditionally used as a medicinal plant in East Asia. It was reported to have detoxification effects on alcohol poisoning, and antioxidant, antidiabetic etc. Sample of 5 g was extracted with 50 mL of 70% EtOH. The supernatant was filtered by 0.45 ㎛ membrane filter before analysis. The UPLC system was performed on Waters alliance UPLC HSS T3 column (2.1 × 100 mm, 1.7 ㎛) with a UV detector. The gradient system was a binary eluent of 0.1% formic acid in water(A) and 0.1% formic acid in acetonitrile(B) with gradient conditions as follows: Initial, 10% B; 1 min, 10% B; 4 min, 20% B; 10 min, 25% B; 12 min, 30% B; 14 min, 90% B; 17 min, 90% B; flow rate of 0.2 mL/min. The samples were injected by 2 µL and were detected at UV 355 nm. As a result of analysis, chromatographic patterns appeared in two cases: samples analyzed for ampelopsin and myricetin, and samples analyzed for taxifolin and quercetin. Among the four compounds, the largest regional difference was found to be taxifolin.

• Fisheries and Aquatic Sciences
• /
• v.5 no.2
• /
• pp.79-86
• /
• 2002

Listeria spp. were isolated from the samples submitted from various seafood plants such as raw materials, products, swab samples of plants floor and conveyor belts through the whole processing procedures. All the samples were collected from 3 kinds of seafood plants such as a imitation crab meat plant, jeotgal plant and frozen seafood plant. And also serotypes of the identified L. monocytogenes were determined. Among the 301 strains of isolated Llsteria spp., 96 strains, 179 strains and 26 strains were identified as L. monocytogenes, L. innocua and L. welshimeri, respectively. While among the 145 strains of Listeria spp. isolated from the imitation crab meat plant, $74\;(51.0\%)$ strains, $64\;(44.1\%)$ strains and $7\;(4.8\%)$ strains were identified as L. monocytogenes, L. innocua and L. welshimeri, respectively. In the case of the 126 strains of Listeria spp. isolated from the frozen seafood plant, $22\;(17.5\%)$ strains of L. monocytogenes,$93\;(73.8\%)$ strains of L. innocua, and $11\;(8.5\%)$ strains of L. wdshimeri were detected. Among the 30 strains isolated from a jeotgal plant, $22\;(73.3\%)$ strains of L. innocua and $8\;(26.7\%)$ strains of L. welshimeri were detected. The detection rates of L. monocytogenes, one of the very important food poisoning bacteria especially in frozen and/or refrigerated seafoods, were relatively high as $77.1\%$ (74/96 strains) in a imitation crab meat plant and $22.9\%$ (22/96 strains) in a frozen seafood plant, but not detected from jeotgal plant. Distribution of L. monocytogenes serotypes and characterization were examined. The serotypes of 96 L. monocytogenes isolated from pork skin, pork fat, the floor and conveyor belts were 1/2a $(59.4\%)$, l/2b $(6.2\%)$, 1/2c $(12.5\%)$ and unknown serotypes $(21.9\%)$. Unknown serotypes were divided into three specific groups by the O antigen they have.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.1 s.52
• /
• pp.43-50
• /
• 1996

We experienced a case of nephropathy in chronic lead poisoning. The patient was 43-year-old male who has been working in secondary lead smelting plant for 14 years. On admission, blood pressure was 160/90 mmHg and the others were non-specific. In past history, he received chelating agent administration for lead poisoning irregularly and medicated for gout, and the blood lead concentration was $180.0{\mu}g/dl$ on 2 months before admission. Smoking habit has been 1 pack per day for 15 years and drinking habit has been 1 bottle of Soju per day but less flow. In liver function test, AST/ALT were 27/28 IU/l and $\gamma-GT$ was 456 IU/l. In blood test, Hb : 11.5 g/dl, Hct : 34.0% and basophilic stipplings were found in peripheral blood smear. Chest PA was normal and abdominal ultrasonographic finding was non-specific except fatty liver. In the test of lead exposure indices, $PbB:83.0{\mu}g/dl,\;PbU:28.3{\mu}g/l$, and blood ZPP was $300.0{\mu}g/dl$. And in renal function test, BUN : 31.4 mg/dl, blood creatinine : 2.7mg/dl, blood uric acid. 9.1 mg/dl, urinary albumin : 100.0 mg/g creatinine, urinary $\alpha_1-microglobulin$ : 120.5 mg/g creatinine, urinary $\beta_2-microglobulin$ : $183.8{\mu}g/g$ creatinine, and 24 hours urinary creatinine clearance was 31.9 ml/min. The ultrasonoguided renal biopsy showed the global sclerosis of glomerulus, moderate atrophy and loss of tubule, and interstitial fibrosis in light microscopy. There were diffuse losses of brush border of proximal tubule in electronmicroscopy.

• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.37-46
• /
• 2023

Due to the aging, advancement, and complexity of chemical facilities, non-routine work such as facility inspection, repair, or maintenance work is increasing. Of the 1,483 accidents that occurred over the past 10 years at chemical product manufacturing sites subject to PSM, accidents that occurred during non-routine work accounted for 56% (932 Cases) of the total. It can be seen that more accidents occur during non-routine work than during routine work. In particular, in order to improve the economy and efficiency of factory operation, there are cases where some facilities are stopped without stopping the entire factory and then inspection, repair, or maintenance work is performed while isolated from the operating facilities. Therefore, first, a safe isolation method must be selected by establishing an isolation standard (Baseline Isolation Standard) based on the chemicals handled, operating conditions, and risk level of the equipment in the chemical plant. Second, since current domestic laws and standards do not suggest the need for specific quarantine standards, it is necessary to institutionalize the preparation of quarantine standards. Technical and institutional improvements are needed to prevent fires, explosions, and poisoning accidents caused by leaks of chemical substances.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.68-77
• /
• 2020

The shipbuilding and offshore industry is a large and complex assembly industry, which causes many safety accidents. The major accidents in the shipbuilding and offshore industry workplaces are stenosis, falling objects, dust, fire, explosions, and gas poisoning. The accident by worker in this industry mainly has three factors: frequent movement, narrow work space, and increased use of subcontractors. To control these factors, it is necessary to monitor the worker's location and work status. In this paper, a worker location monitoring system using inaudible sound wave was designd that can be used in environments with many metal barriers. The process included deriving stakeholder requirements, transforming to system requirements, designing system architecture, and developing prototype. The prototype was validated by third-party testing agency. As a result, it satisfied the designed performance and verified its feasibility.