• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.398-410
• /
• 1982

Summer crops grown in uplands are greatly diversified and show a large variation in difference with year and location in Korea. The principal factor for the variation is weather, in which precipitation and temperature play a leading role and such a weather factors as wind, sun lights also influence production of the summer crops. Since artificial control of weather conditions as a main stress factor for crop production is almost impossible, it must be minimized only by an improvement of cultivation techniques and crop improvement. Precipitation plays a role as one of the most important factor for production of the summer crops and it is considered in two aspects, drought and excess moisture. This country, which belongs to monsoon territory, necessarily encounter one of this stress almost every year, even though the level is different. Therefore, the facilities for both drought and excess moisture are required, but actually it is not easy to complete for them. On this account, crops tolerant to drought, excess moisture and pests should be considered for establishing summer crops. For the districts damaged habitually every season, adequate crops should be cultured and appropriate method of planting, drainage and weed control should be applied diversely. Injuries by temperature is mainly attributed to lower temperature particularly in late fall and early spring, although higher temperature often causes some damages depending upon the kind of crops. Sometimes, lower temperature in summer season playa critical role for yield reduction in the summer crops. However, certain crops are prevented to some extent from this kind of stress by improving varieties tolerant to cold, hot weather or early maturing varieties. As is often the case, control of planting time or harvesting is able to be a good management for escaping the stress. Lodging, plant diseases and pests are considered as a direct or indirect damage due to weather stress, but these are characters able to be overcome by means of crop improvement and also controlled by other suitable methods. In addition, polytical supports capable of improving constitution of agriculture into modern industry is urgently required by programming of data for the damages, establishment of damage forecasting and compensation system.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.49-66
• /
• 1969

Eri-silkworm is known as a tropical insect where as poly-voltine type in that area. It eats caster oil plant leaves which are cultivated as an every year cultivatable seed oil use in this country, even though it grows for many years in tropical countries. That is why, farmers have freedom for its cultivation in any year if they want. Therefore, eri-silkworm rearing service is flexible for its diet procurment as wish of farmer. The eri-cocoon price or economical fluctuation may be reactable for the rearing work not like as mulberry cocoon. Fortunately, it also eats cynthia tree leaves. Standing from such a easy condition, the authors have studied about this problem since 1963 to develope a culturing method of eri-silkworm rearing in this country and the authors brought out the matters to be produced as an industry scale. Here, the authors summarized their works of the results covering with thirty three work tables. The obtained results are as follows.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.382-387
• /
• 2007

The approval of use of certain food-grade phosphates as food additives in a wide variety of meat products greatly stimulated research on the applications of phosphates in foods. Phytic acid is a natural plant inositol hexaphosphate constituting 1-5% of most cereals, nuts, legumes, oil seeds, pollen, and spores. In this study, we investigated antibacterial activity of sodium phytate (SPT) against Salmonella typhimurium in tryptic soy broth with different pHs and in chicken, pork and beef. In tryptic soy broth, SPT at the concentrations of 0.1, 0.5, and 1.0% effectively inhibited the growth of Salmonella typhymurium in a concentration-dependent manner. At pH 5.5-7.0 similar to meat pHs, 1% SPT almost completely inhibited the bacterial growth. The inhibitory effect of SPT was stronger at pH 7.0 than pH 5.5. In chicken, pork, and beef, SPT at the concentrations of 0.1, 0.5, and 1% significantly inhibited the growth of Salmonella typhimurium in a dose-dependant manner (p<0.01). The addition of 1% SPT in the meats significantly increased the meat pHs. These results indicate that SPT is very effective for inhibition of bacterial growth as a muscle food additive for increasing food safety and functions.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1274-1279
• /
• 2006

The formation characteristics of $BDOC_{rapid}$ and $BDOC_{slow}$ with different ozone dosages for 3 different kinds of waters from Maeri raw water in the down stream of Nakdong river, Hoidong reservoir water in Busan City and treated Maeri raw water(sand filtered) has been investigated in this study. The ozone dosages for producing maximum $BDOC_{total}$ in the Maeri raw water, Hoidong reservoir water and sand filtered water of Maeri were 0.9, 1.1 and 1.4 $mgO_3$/mgDOC respectively. It could be concluded that the ozone dosages for formations of maximum $BDOC_{total}$ were determined by characteristics of water. The ozone dosages for producing maximum $BDOC_{rapid}$ in the Maeri raw water, Hoidong reservoir water and sand filtered water of Maeri were 0.9, 0.9 and 1.0 $mgO_3$/mgDOC respectively that were same or lower than the used ozone dosages for producing maximum $BDOC_{total}$. $BDOC_{slow}$ was being formated and increased continuously with the higher ozone dosages which were the used ozone dosages for maximum formation of $BDOC_{total}$ and $BDOC_{rapid}$. For the best results of a pre-treatment of biofiltration, the optimum ozone dosage ranges in formation of $BDOC_{rapid}/BDOC_{total}$ were $0.6{\sim}1.0\;mgO_3$/mgDOC that were lower than the ozone dosage ranges of $0.9{\sim}1.4\;mgO_3$/mgDOC for the maximum formation $BDOC_{total}$. The reported results indicated that the best and effective ways from economic and technical points of view to determine the optimum ozone dosages of the pretreatment of biofilteration process were investigating and classifying BDOC.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1381-1389
• /
• 2007

Wastewater discharged by industrial activities of metal finishing and electroplating units is often contaminated by a variety of toxic or otherwise harmful substances which have a negative effects on the water environment. The treatment method of heavy metal-cyanide complexes wastewater by alkaline chlorination have already well-known($1^{st}$ Oxidation: pH 10, reaction time 30 min, ORP 350 mV, $2^{nd}$ Oxidation: ORP 650 mV). In this case, the efficiency for the removal of ferro/ferri cyanide by this general alkaline chlorination is very high as 99%. But the permissible limit of Korean waste-water discharge couldn't be satisfied. The initial concentration of cyanide was 374 mg/L(the Korean permissible limit of cyanide is 1.0 mg/L max.). So a particular focus was given to the treatment of heavy metal-cyanide complexes wastewater by $Zn^{+2}/Fe^{+2}$ ion and coprecipitation after alkaline chlorination. And we could meet the Korean permissible limit of cyanide(the final concentration of cyanide: 0.30 mg/L) by $Zn^{+2}/Fe^{+2}$ ion and coprecipitation(reaction time: 30 min, pH: 8.0, rpm: 240). The removal of Chromium ion by reduction(pH: 2.0 max, ORP: 250 mV) and the precipitation of metal hydroxide(pH: 9.5) is treated as 99% of removal efficiency. The removal of Copper and Nickel ion has been treated by $Na_2S$ coagulation-flocculation as 99% min of the efficiency(pH: $9.09\sim10.0$, dosage of $Na_2S:0.5\sim3.0$ mol). It is important to note that the removal of ferro/ferri cyanide of heavy metal-cyanide complexes wastewater should be employed by $Zn^{+2}/Fe^{+2}$ ion and coprecipitation as well as the alkaline chlorination for the Korean permissible limit of waste-water discharge.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.699-705
• /
• 2010

In this study, three different biological activated carbons (BACs) were prepared from activated carbons made of each coal (F400, Calgon), coconut (Samchully) and wood(Pica, Picabiol) which were run for two and half years in the pilot plant. The attached bio-film microorganisms in and on the BACs were isolated and identified. The results showed that nine different bacteria species (Chryseomonas luteola, Stenotrophomonas maltophilia, Pseudomonas vesicularis, Aeromonas hydrophila, Spingomonas paucimobilis, Agrobacterium radiobacter, Pseudomonas fluorescens, Spirillum spp., and Pasteurella haemolytica) were isolated and identified, the dominant species was Pseudomonas sp. that had occupied 56.5%. More specifically, it was observed that the populations of the microorganisms deceased in the order: Pasteurella haemolytica (18.9%) > Chryseomonas luteola (4.0%) > Agrobacterium radiobacter (3.5%) > Aeromonas hydrophila (2.0%) in and on the BACs. After isolating of 9 species of biofilm microorganisms, the growth curve for the biomass was investigated. During 24~96 hours, the biomass has the highest concentration, and activity of the biomass was the best to uptake geosmin as carbon resources. The operation temperatures for investigating the biodegradation of geosmin were set at $4^{\circ}C$ and $25^{\circ}C$. Pseudomonas vesicularis, Pseudomonas fluorescens, Agrobacterium radiobacter and Stenotrophomonas maltophilia played a maior role in removing the target compound as geosmin. However, geosmin was not biodegraded well by Chryseomonas luteola, Spingomonas paucimobilis, and Spirillum spp.. It is also interesting to evaluate kinetics of biodegradability of geosmin. The first-order rate constants for biodegradability of geosmin at $4^{\circ}C$ and $25^{\circ}C$ were $0.00006{\sim}0.0002\;hr^{-1}$ and $0.0043{\sim}0.0046\;hr^{-1}$ respectively. Higher water temperature produced better geosmin removal rates. When concentrations of geosmin increased from 10 to 10,000 ng/L, the rate constants for biodegradability of geosmin increased from 0.0003 to $0.0882\;hr^{-1}$. As described earlier, higher geosmin concentration in the reactor produced higher rate constant.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.268-277
• /
• 2013

This study investigates the effects of accumulated levels of heavy metals and nutrients of cultivated soybean plant tissues, after the continuous application of sewage sludge (SS) and industrial sludge (IS). SS and IS were applied to soybean plants at loading of 0, 11.25, 22.50, and 45.00 Mg/ha, and the contents of heavy metals (Cd, Pb, Ni, Cu, and Zn), proteins, and amino acids in the cultivated soybean plants were measured. The Cd content in the soybean was 0.02~0.05 mg/kg, which is within the safety level set in the standard, and that of Pb was 0.02~0.15 mg/kg, which is also within the safety level except for IS 45 Mg/ha. The soybean harvest quantity was higher in the treatment groups than the control group in the first year. However, in the second year, SS had lower harvest and IS had the same level or a decreasing tendency, compared with the control group. In the first year, the content of amino acid which followed handling of SS was increased in the sludge groups more than in the control group in the case of glutamate. However, the influence of continuous application was increased in the sludge groups in the case of amino acids of 12 types. In conclusions, the accumulation in soybean of heavy metals by sludge treatment is not a problem, but the decreased yields needs to be considered. In addition, the most appropriate level of sludge treatment was 11.25 Mg/ha.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.281-287
• /
• 2014

This study was carried out to investigate the effect of transplanting methods on the growth and yield of paprika (Capsicumannuum L. 'Veyron' and 'Coletti') in coir culture during two seasons. The summer type sowed in late winter and harvested from summer and the winter type sowed in summer and harvested from early winter. Control plants grown on the 10cm rockwool block were transplanted on coir slab when the 8 leaves of seedlings were emerged, while plants of the young seedling transplanting(YST) grown on the 7cm rockwool block was put on the slab at time of 2-3 leaves developed. Plants of the temporary transplanting(TT) on the 10cm rockwool block were moved on the slab after 2-3 weeks underpinning cultivation, while plants of the blockless transplanting(BT) were directly transplanted in the slab when the seedlings have 2-3 leaves emerged. The plant height of the control and BT treatment were longer while that of TT showed the shortest among treatments. The bigger leaf size was observed in the YST and BT treatment. Leaf number of the BT treatment was increased, while that of TT was the lowest. There were no differences in fruit size, locules and thickness among treatments. The lower fruit weight was observed in the TT of the winter culture and fruits in the control and YST of the summer culture showed higher fruit weight. The percentage of marketable fruit appeared to be slightly higher in the winter culture than in the summer culture. There were no differences in marketable fruit rate among the treatments of the winter culture but, among the summer culture, the highest marketable fruit rate was observed in the BT with 93%. The yield of the YST and BT was higher and that of the TT was the lowest.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.2
• /
• pp.86-92
• /
• 1989

This experiment was conducted to find out the effect of soil improvement on the changes of soil physical properties and the silage yield of corn in the newly-reclaimed sloped land. Corn (Suweon 19) was cultivated under the six different treatments at Songjeong loam, 20 percent slope, during 1985 to 1987 and various soil physical properties and silage yield were investigated. Growing Degree Days of corn during the growing season were $820.6^{\circ}C$ in 1985, $810.2^{\circ}C$ in 1986, and $812.4^{\circ}C$ in 1987. The changes of soil bulk density were high variances by different treatments in 1st year, but sluggish in 2nd year. In 3rd year, the control plot was the highest, but the integrated improvement plot was the lowest than the other plots. Soil hardness was reduced in subsoiling and integrated improvement plot with deep plowing, and water stable aggregates and air permeability were higher in these plots. Moisture retention was no differences between treatments. Dry matter yield of corn was decreased in the 2nd year than the 1st year, but increased in the 3rd year. Increasing ratio of yield was in the order of integrated improvement > subsoiling > lime > phosphate > compost > control plot. Correlation among the dry matter yield and soil physical properties were significant at 1%, but moisture retention of soil was not significant at 5%.

• Journal of the Korean Geographical Society
• /
• v.28 no.1
• /
• pp.16-39
• /
• 1993

This study aims to analyze the locational factors which the small firm enterpreneurs in Pusan City mainly consider in deciding location choices for their plants, and then to grasp the differences of the factors in terms of nature of firms, managerial personal characteristics and zoning areas. In order to implement the purpose of the rescarch, data are collected from selected small firm enterpreneurs throughthe questionaire. The main results are summerized as follows. First, it is pointed out that small firm indu-strialists for the regional choice consider crucial rationale as non-economic factor of personal reson with additional consideration of transpor-tation, infrastructure, service, market and labor forces. But in selection of site, they are apt to have high regard on the such factors as infra-structure, service, land and transportation factor. These factors to select the site demonstrate differentiation in terms of character of enter-prises, managerial characteristics and zoning areas. For example, land in the light of indu-strial sector is regarded as an important factor with longer the time of the establishment of firms or more aged or experienced enterpreneurs, wheras infrastructure and service in the heavy and chemical industrial sector are taken up as an important one with shorter the time of establishment of firms or less aged or experienced or higher educational background of enterpren-eurs. In addition, the non-economic factors such as the residential livebility and personal reason are picked up as important factors with smaller the firm or more aged or experienced, lesser educational background of entrepreneurs. Taking into consideration zoning area, infra-structure and service in the industrial area such as the exclusive and semi-industrial areas, land in green belt area, and transportation in the commercial and residential areas are singled out as the most important factors respectively. In addition, the non-economic factors of the resi-dential livability and personal reason in the non-industrial areas are also highly regarded. Second, land is picked up as the most impor-tant one of pulling factors toward the present site while other factors such as infrastructure, service, personal reason are also regarded as the secondary reason for the move-in decision; the pulling factors for the present plant location show somewhat differences in terms of the charcter of the enterprises, managerial chara-cteristics and zoning areas. Policy measures including land, infrastructure under the environmental aspects, service and transportations are, in turn, pointed out as the important ones for pushing factors. Meanwhile, as the important staying factor in the present place, transportation, infrastructure and service under the aspect of the agglomeration benefit, market, personal reason are considered. The pushing and staying factors also shows somewhat distinctive differences in terms of the character of enterprises, managerial chracteristics and zoning area. In the case of zoning area, land is regarded as the most important factor to move out, especially in the non-industrial areas inclu-ding the commerical and residential areas policy measures, infrastructure and service are indicated as important factors to move out. In the mean-time, as the important staying factor, industria-lists in the exclusive and semi-industrial areas point out transportation, infrastructure and service. Whereas the counterparts in the com-mercial area regard transportation and market as important factor, those in the residential area consider the non-economic factors such as personal reason and residential livability. Taking into consideration the result of this analysis, it is identified that the locational chara-cteristics of the intraurban small firm industries are not only associated with the character of enterprises, but also with manager's personal character and the trait of zoning area. Therefore, it seems that the thorough review or examination of enterprises, industrialists' characteristics and zoning areas will have meanin-gful significance in attemption explanation of small firm industries at the intrauban scale in the future. Especially, it appears that the eco-nomic factors such as land, infrastructure, service, transportation, and the non-economic factors such as residential livability and personal reason play together important parts to determine the locational choice of small firm industries along with non-industrial benefit. Thus, such status reveals the obvious implication for the intraurban industrial policy in the future.