• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.204-210
• /
• 2001

Paclitaxel can be produced in high yield and with a high degree of purify from plant cell cultures of Taxus chinensis. The complete purification method was systematically established and described. This method was an efficient procedure for the purification of paclitaxel from crude paclitaxel, consisting or reverse-phase chromatography, followed by a normal-phase chromatography. The two-stage HPLC purification scheme serves as an effective and economical approach for resolving paclitaxel from complex mixtures of taxoids, with high purify (>99%) and low impurities (<0.1%). The process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. The process has been optimized to minimize solvent usage, complexity, and operating costs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.49-49
• /
• 2000

Sensors are used to measure the states in need for control in a closed-loop system. Accuracy, reliability, stability of sensors are closely related to the controller performance. In case of sensor faults, they are detected by examining the sensor output values and the major values of the system. And then the types of the faults are recognized by the analysis of symptoms of faults. In this paper, a self-validating sensor is applied to the control of an aerodynamic plant system with the sensor fault problems in the potentiometer module for exact positioning to show the applicability. We propose a digital controller can provide a satisfactory loop performance even when the sensor faults occur.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.55-59
• /
• 2004

This study aimed to develop a seeder for sowing large seeds such as those of fruit vegetables used as rootstocks in grafting. It investigated how the nozzle diameter and the nozzle's vacuum pressure affected the seeding performance. This study found that a nozzle diameter of 1.5 mm was capable of sowing most of the seed sizes used in this study. The highest seeding rates for 'Chambak', 'Tuktozwa', and 'Hukjong' were $97.6\%$, $98.8\%$, and $97.6\%$, respectively. Lineup status after sowing was good. The working performance was 75.6 sheets/hr. An average seeding rate of 1 grain was $97.8\%$.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2212-2215
• /
• 2002

This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system. To verify the performance of proposed protocol experimental were carried out, and the following results are obtained. 1) proper initialization of the protocol. 2) normal receiving and transmission of data. 3) proper switching of transmission media in case of a fault condition on the one of transmission media. The proposed protocol exhibits the excellent performance in the experimental system. From the test results in the experimental system, the proposed protocol, PICNET-NP, can be used for the upgrading of a nuclear power plant and the distributed control system in the next generation of nuclear power plant.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2123-2125
• /
• 1999

In recent the XLPE cable has been applied more widely because of its advantages, such as the low-cost and simple installation. For a prefabricated joint, its working time is short, its jointing procedures aγe simple, and its quality control is easy. Electrical performance targets of our developed 66kV cable accessories has been approved through the type test in accordance with IEC publication 840. This paper describes the developmental effort in terms of the design, structure and results of performance verification tests for 66kV XLPE cable system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.1
• /
• pp.10-19
• /
• 1990

A fault tolerant control system, in which a digital back-up controller system is added on the existing analog control system, is developed for enhancing reliability of boiler control system in power plant. The digital back-up controller system(DBCS) has a multi-processor structure with capabilities of fault diagnosis, back-up control, self test, and graphic monitoring. Specifically, switching mechanism composed of expandable modules is designed so that back-up controller takes over any faulty control loops and the number of back-up control loops is determined as that of simultaneous faults. A process simulator that simulates the boiler analog control system is developed for safety test and performance evaluation prior to real plant application. DBCS is installed at the Ulsan thermal power plant, and fault tolerant control performance is assured under the faults that some controller modules are pulled out.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.46-50
• /
• 2013

This paper investigated wind turbine degradation quantitatively by analyzing the short-term operation records of the Shinan Wind Power Plant. Instead of a capacity factor which is needed to be normalized its variability due to monthly wind speed change, this study suggests an analysis method by taking the difference between the theoretical power output calculated from the nacelle wind speed and actual power output as the quantitative index of performance degradation. For three-year SCADA data analysis of the Shinan Wind Power Plant, it was confirmed that power output degradation rate of 0.54% per year. This value is within the average reduction rate 0.4%/year~0.9%/year of normalized capacity factor of the onshore wind power plants in U.K. and Denmark; however, lower than the rate 2%/year of Canadian wind power plants.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.1
• /
• pp.29-38
• /
• 1996

To improve the reliability of control systems, certain robustness to plant uncertainties and disturbance inputs is required in terms of well founded mathematical basis. Robust control theory was set up and developed until now from this motivation. In this field, H$_2$or H\ulcorner norm performance measures are frequently used nowadays. Moreover a mixed H$_2$/H\ulcorner control problem is introduced to combine the merits of each measure since H$_2$control usually makes more sense for performance while H\ulcorner control is better for robustness to plant perturbations. However only some partial analytic solutions are developed to this problem under certain special cases at this time. In this paper, the mixed H$_2$/H\ulcorner control problem is considered. The analytic(or semi-analytic) solutions of (sub)optimal mixed H$_2$/H\ulcorner state-feedback controller are derived for the scalar plant case and the multivariable plant case, respectively. An illustrative example is given to compare the proposed analytic solution with the existing numerical one.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.1
• /
• pp.33-42
• /
• 2011

As the development of construction technology and new materials, building requirements has been varied gadually. Comfortable environment and serviceability of production activity and energy conservation are being dealt with very seriously. Recently localization of engineering technology of Power Plant, however, construction materials and domestic technology are being developed forcingly. According to above topics this thes is going to study roof waterproofing, thermal insulation and evaluate adiabatic performance and evaluation of properties of waterproofing materials and energy conservation. The results of studying and evaluating of roof waterproofing, thermal insulation and adiabatic performance of Power Plant are as follows. 1. Sheet waterproofing method is better than that of asphalt waterproofing method in that adaptability of wearhertight, thermal resistant, contraction and expansion. 2. It is required to replace polyurethane or ethylene used as thermal insulation with rock wool which is noncombustible materials. 3. It is recommended to usd outer insulation method than inner insulation method due to superioty of outer insulation method. Efficiency of insulation materials used in power plant is generally good except perlite mortar used in the power plant(YGN 1-2, GRI 1-2).

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.37-42
• /
• 2016

The demand for wireless technology in plant structure has recently been increasing due to several advantages such as installation cost reduction, easy placement, easy extension and aesthetic benefits. Among the many wireless technologies, ZigBee is one of the most useful for plant structure; a wireless plant networking system can be configured using ZigBee alone. This research proposes a ZigBee to use for extreme cold region and thereby enable integration of wired and wireless plant monitoring systems. In this study, in order to assess the performance of ZigBee measured data by thermocouple were examined based on the results from laboratory tests between existing ZigBee and developed ZigBee. From the experiment results, performance of developed ZigBee in harsh environment can be increased well.