• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.914-919
• /
• 2017

While industry understands the importance of keeping equipment operational and well maintained, the importance of tracking maintenance information in reliability models is often overlooked. Prognostic models can be used to predict the failure times of critical equipment, but more often than not, these models assume that all maintenance actions are the same or do not consider maintenance at all. This study investigates the influence of integrating maintenance information on prognostic model prediction accuracy. By incorporating maintenance information to develop maintenance-dependent prognostic models, prediction accuracy was improved by more than 40% compared with traditional maintenance-independent models. This study acts as a proof of concept, showing the importance of utilizing maintenance information in modern prognostics for industrial equipment.

• 대한기계학회논문집B
• /
• 제34권5호
• /
• pp.465-469
• /
• 2010

발전설비 내 공기예열기는 보일러 연소가스로부터 열을 회수하여 유효열의 손실을 감소시킴으로서 보일러의 열효율을 높이기 위해 설치된다. 본 연구에서는 계획예방정비가 공기예열기의 성능에 미치는 영향을 고찰하였다. 공기예열기의 성능지표들은 공기예열기의 계획예방정비 전후의 운전 상태와 성능변화 모두를 고려하여 계산되었고, 공기예열기의 중요한 성능지표로는 가스 측 온도효율, 공기누설률, 열회수율, 열관류율과 열용량비들이다. 계획예방정비 전후의 공기예열기 성능평가로부터 공기예열기의 모든 성능 지표가 계획예방정비 후 향상되었다.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.662-666
• /
• 2005

Using data gathered from expert opinion of plant and equipment professionals; this paper presents the key variables that may constitute a maintenance proficient plant operator. The Multivariate Discriminant Analysis (MDA) was applied to generate data and was tested for sensitivity analysis. Results showed that the MDA model was able to classify plant operators' proficiency at 94.10 percent accuracy and determined nine (9) key variables of a maintenance proficient plant operator. The key variables included: i) number of years of experience as equipment operator (PQ1); ii) eye-hand coordination (PQ9); iii) eye-hand-foot coordination (PQ10); iv) planning skills (TE16); v) pay/wage (MQ1); vi) work satisfaction (MQ4); vii) operator responsibilities as defined by management (MF1); viii) clear management policies (MF4); and ix) management pay scheme (MF5). The classification procedure of nine variables formed the general model with the equation viz: OMP (general) = 0.516PQ1 + 0.309PQ9 + 0.557PQ10 + 0.831TE16 + 0.8MQ1 + 0.0216MQ4 + 0.136MF1 + 0.28MF4 + 0.332MF5 - 4.387

• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.1-7
• /
• 2015

The aircraft maintenance demands a lot of aviation mechanics in urgent according to the high season and low season in seasonal demand adjusted, unplanned maintenance work such as AD (airworthiness directives) and troubleshooting of aircraft system fault. The advent of Super-Large Aircraft such as A380 with aircraft materials, power plant and avionics systems which were not in previous models must be expected to increase the complexity of the aircraft maintenance system. This study is intended to propose the development plan for formation of positive flexibility culture in aircraft maintenance organization through the review of previous research on flexibility culture of organization and through empirical research for bureaucratic and poor factors by the evaluation of flexibility culture level of domestic aircraft maintenance organization.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 공동학술발표회
• /
• pp.51-51
• /
• 2017

• Nuclear Engineering and Technology
• /
• 제7권2호
• /
• pp.159-165
• /
• 1975

The Nuclear power industry today faces a serious and rapidly emerging problem in reactor maintenance and occupational radiation exposure control. The basic problem is the need for much maintenance on nuclear power plants. The problem is seriously compounded by radiation exposure control requirements. Many studies are underway seeking solutions tut the industry is developing rapidly and new plants will not await the results of such studies. It is essential that attention be given to maintenance and exposure control in all phases of plant design, construction and operation.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.83-88
• /
• 2018

Engineering is a sector with more than three times the industrial effectiveness of manufacturing. In the domestic engineering life cycle, the Operations & Maintenance (O&M) phase is a relatively high level of technology. Based on accumulated knowledge of O&M phase, it is necessary to advance operating technology and expand overseas O&M market expenditure. This study is the early stage of knowledge-based power plant O&M service framework reference model. In this study, we propose a conceptual model of architecture framework for power plant O&M. We survey the architecture framework and reference model and propose conceptual model of architecture framework for power plant O&M. The conceptual model of architecture framework for power plant O&M consists of stakeholder, O&M scenario, O&M technology. In particular, the O&M technology is defined as the fourth industrial revolution intelligence information technology. We defined a meta model from the conceptual model to define the power plant O&M architecture framework. In the future, we intend to development an architecture framework from the conceptual model and meta model.

• 시스템엔지니어링학술지
• /
• 제15권1호
• /
• pp.25-33
• /
• 2019

In the plant industry, the share of equipment accounts for 45 ~ 75%, which is very high. It is a traditional plant centered on processes and reactions like petroleum and chemical plants. Renewable energy generation plants such as wind power generation and solar power generation are equipment-centric plants. Equipment-centric plants are very important not only in the EPC phase but also in the operation and management phase. The procurement of equipment for plant operation and management can be divided into make and buy. Make is a method of producing equipment itself, and buy is a method of procuring equipment from the outside. The procurement method of the equipment directly affects the plant operation and management cost. In this study, the decision making of equipment procurement method for plant operation and management is defined as 4 phase. Each phase is selection of procurement decision-making objects, technology strategy perspective, finance perspective, and production perspective. In detail, we defined selection process of procurement decision-making objects and technology strategy perspective process. We will contribute to the enhancement of the competitiveness of the plant operation and management area by carrying out researches on the process and application examples of financial and production perspectives in the future.

• 한국기후변화학회지
• /
• 제6권2호
• /
• pp.105-111
• /
• 2015

With PV market extension, Operation & Maintenance (O&M) went on the floor as an effective method so solve the reduction phenomenon of Performance Ratio (PR) of PV power plant and as a new business model of photovoltaic industry. This study chose institutionalization of O&M to vitalize domestic photovoltaic industry improving level of photovoltaic technology and dominate the market in advance. The result of analyzing advanced researches and domestic cases indicates that O&M is essential of operating PV power plant, therefore, now is the time for a systematic approach to establish O&M policy.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.41-58
• /
• 2016

Reliability Centered Maintenance (RCM) introduces a systematic method and decision logic tree for utilizing previous operating experience focused on reliability and optimization of maintenance activities. In this paper RCM methodology is applied on safety injection system for APR-1400. Functional Failure Mode Effects and Criticality Analysis (FME&CA) are applied to evaluate the failure modes and the effect on the component, system and plant. Logic Tree Analysis (LTA) is used to determine the optimum maintenance tasks. The results show that increasing the condition based maintenance will reduce component failure and improve reliability and availability of the system. Also the extension of the surveillance test interval of Safety Injection Pumps (SIPs) would lead to an improved pump's availability, eliminate the unnecessary maintenance tasks and this will optimize maintenance activities.