• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.132-139
• /
• 2014

According to the increase of foreign laborers at domestic construction sites, it's necessary to research in terms of the unsafe acts of both Korean and foreign laborers in order to prevent construction disasters. The objective of this study is to clarify the characteristics and the improvement priority of the unsafe acts using IPA(Importance-Performance Analysis). The result of this study showed which items of unsafe acts are identify difference between Korean and foreign laborers. Moreover, the result of IPA also showed items of unsafe acts that needed the immediate improvement for each one. Especially there are two items, i.e. equipment malfunction and wrong handling of hand tools, which both Korean and foreign laborers think simultaneous those needs improvement. The results can be utilized to plan and to improve the safety management and education at a site considering the characteristics of foreign laborers.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.272-284
• /
• 1996

The present study has quantitatively assessed the regional production, income and employment impact resulting from the construction and operation of nuclear power plant (NPP) upon the domestic local areas by applying the regional input-output analysis model to the case of Wolsong unit-l site. The conclusions regarding the most likely regional economic impacts upon the wolsong site are summarized as follows: 1. The income multipliers are calculated to be 1.563 for the construction phase and 1.500 for the operation phase. These values are relatively high compared with those of other conventional facilities. 2. The level of total employee's wage induced employment associated with the construction phase has been estimated to be 37,000 while that with the operational phase in 1990 to be 5,610. 3. With relation to the aspect of resident welfare it is found that the industrial sector associated with electricity, gas and water supply have remarkably improved with the construction of the NPP. 4. The NPP siting has induced substantial changes in interindustry (input-output) structures of the Wolsong unit-l site which is one of the rural areas where all the domestic NPPs are sited. Such changes are attributed to the industrial recomposition of the region. 5. With the application of other regional economic analysis models and the use of more sufficient regional data, other detailed studies on the economic impact analysis of domestic NPP-related facility sitings are suggested to be carried out further since the influence of NPP sitings is significant to the national economic impact as well as the regional economic impact.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.177-183
• /
• 2016

The daily report includes the most detailed information and various daily planning and performance data recorded at a site, and includes work types, the number of workers, and the equipment and materials used. However, in the daily reporting process, some information can be omitted or distorted or even made redundant due to there being several steps of manual input. For this reason, the daily report is utilized for a simple report rather than for an appropriate purpose. Thus, to resolve the issues of the existing daily report system mentioned above, a daily report system using a digital pen was developed and then applied to an actual construction site to verify its applicability. As a result, it was found that 96.610% recognition accuracy of handwritten letters could be achieved. In addition, it was no longer necessary to enter the same information multiple times and no additional training or education for using a mobile device was needed. The digital pen-based daily report program developed in this study is expected to contribute to an improvement of information management efficiency and site document management work by addressing the problems of the existing report system.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.35-46
• /
• 2000

Environmental pollution has become more and more serious in urban areas since industrialization as most streams and rivers were developed heavily because of economic opportunism. Recently river restoration techniques, applied in advanced countries, have been introduced to Korea. But the application of river restoration techniques developed in advanced countries, has a lot of limitations in respect of economic loss during construction, suitability for the domestic situation and the problem of flood control. The method of minimizing the problems must take into consideration these issues, including economic considerations. So from these points of view this study intends to plan ecological river restoration and to create a nature friendly river in the case of the Chungrang river. The subject site is the upper part of Chungrang river, from the Nokchun bridge to Sang-kye bridge, where the ecosystem is well preserved in comparison with other parts of the river. The subject site is divided into 10 sections for plant state investigation. The result of plant-state investigation showed pioneer water plants such as Persicaria thunbergii, Oenanthe jaranica, Rumex crispus. appeared very often. On the basis of the existing plant state, this study has planned an appropriate plant state for the river and has planned for bank protection using a method of construction, which is suitable for natural river. In this study, first of all, it is intended to investigate the plant growth state of Chungrang river and try to plan a particular ecosystem for the river for the purpose of the revival of the natural river.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.61-74
• /
• 2021

A paradigm shift in the government's energy policy was reflected in its declaration of early closure of old nuclear plants as well as cancellation of plans for the construction of new plants. To this end, unit 1 of Kori Nuclear Power Plant was permanently shut down and is set for decommission. Based on these changes, the off-site transport of spent fuels from nuclear power plants has become a critical issue. The purpose of this study is to develop an optimized method for transportation of spent fuels from Kori Nuclear Power Plant's units 1, 2, 3, and 4 to an assumed interim storage facility by simulating the scenarios using the Flexsim software, which is widely used in logistics and manufacturing applications. The results of the simulation suggest that the optimized transport methods may contribute to the development of delivery schedule of spent fuels in the near future. Furthermore, these methods can be applied to decommissioning plan of nuclear power plants.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.89-98
• /
• 2017

The offshore plant structure has been transported to the site by barge because it is hard to manufacture in site. When the structure was transported on the sea, offshore plant structures and connection were experienced repetitive submarine load. For this reason, it was known for that the axial force of high-strength bolted connection was declined. Therefore, in this study, high-strength bolted connection was evaluated the shear fatigue performance under longtime fatigue load during marine transport. The experimental variables were selected intial axial force, surface type, and bolt type because they ar important factors in the change of axial force of bolts. As a experimental results of considering various variables, the variation of axial force showed within 1%. Therefore, the high-strength bolted connection was verified structural safety under longtime fatigue load.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.29-30
• /
• 2011

A Green Frame is a composite Rahmen precast concrete structure that utilizes the advantages of the steel frame and the reinforced concrete. Compared to bearing wall structure, the precast concrete structure may raise construction cost If the precast concrete members are produced in plant. Thus, if the precast concrete members can be produced in site, the cost-effectiveness and quality shall be increased. Various site conditions must be considered and reviewed to ensure a space for the in-situ production. Therefore, this study focuses on the basic study on the arrangement of in-situ production module of composite precast concrete members.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.84-87
• /
• 2011

This paper describes the application of the three sustainable design elements for a residential project in the county of Los Angeles, USA. The first design element is the green building design in which a base model will be created using the Autodesk REVIT MEP program for the analysis by Building Information Modeling (BIM) for the energy analysis modeling process to determine the energy savings for each of the recommended design features. The second element is the Low Impact Development design for the site design using specialty material and structural devices for infiltration and recycling of storm water for reuse. The third element is the application of drought tolerant plant species in the site's landscaping design as a means to conserve water. The construction cost associated with the application of these three elements will be reviewed to determine the practicality and effectiveness of this sustainable design approach.

• Journal of KIBIM
• /
• v.5 no.3
• /
• pp.33-40
• /
• 2015

Over a few decades, off-site construction (OSC) has been widely used for building and bridge constructions. OSC is a construction method that build structures at a different location than the location of use, and normally it occurs in a manufacturing plant. There are many studies on the perceived benefits of OSC, yet relatively few studies which quantitatively assess the benefits and factors affecting the decision of the use of OSC have been investigated. This study investigates the influencing factors of the use of OSC system and its revitalization solutions in the construction industry. As the research method, interview and questionnaire survey are conducted by visiting industry experts of OSC and sending a questionnaire to the OSC stakeholders including engineers, manufacturers, contractors and clients in the United Kingdom (UK). The construction industry of the UK is targeted for the study since it has a number of commons with the Korean construction industry in terms of the structure of the construction industry and current low take-up of the OSC. The survey provides the results that the reluctance of clients to use OSC is the key factor of the slow use of OSC despite of the perceived benefits of OSC. In addition, in order to revitalize OSC in the construction market, three revival recommendations are suggested based on the survey results.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.227-235
• /
• 2015

For last decade, the number of foreign workers in all industries has been increased continuously. In the construction industry, the number of foreign workers has also increased as 80,000 persons in 2010. According to the increase of foreign workers at domestic construction sites, the frequency of construction disasters has increased as well. The safety education can be a effective solution to decrease the construction disaster. So, it is necessary to develop the appropriate education system for foreign workers. Therefore, the objective of this study is to propose a safety education model for foreign workers and to develop the prototype system. In a result of that, a new safety education model and prototype system was constructed based on the method of E-learning. The system can support for foreign workers in domestic construction sites to understand the safety education easily. And, it can also assist the safety manager to educate and manage the foreign workers efficiently.