• 한국정밀공학회지
• /
• 제16권11호
• /
• pp.22-35
• /
• 1999

The block assembly process takes more than half of the total shipbuilding processes. Therefore, it is very important to have a practically useful block assembly process planning system which can build plans of maximum efficiency with minimum man-hours required. However, the process plans are often not readily executable in the assembly shops due to severe imbalance of workloads. This problem arises because the process planning is done on block by block basis in current practice without paying any attention to the load distribution among the assembly shops. this paper presents the development of an automated hull block assembly process planning system which results in the most effective use of production resources and also produces plans that enable efficient time management. If the load balance of assembly shops is to be considered at the time of process planning, the task becomes complicated because of the increased computational complexity. To solve this problem, a new approach is adopted in this research in which the load balancing function and process planning function are iterated alternately providing to each other contexts for subsequent improvement. The result of case study with the data supplied from the shipyard shows that the system developed in this research is very effective and useful.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.115-127
• /
• 2006

At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection using the 3D CAD model, which was generated from the initial hull structural design system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, etc. of a building block was proposed as well. Moreover, the simulation method of the block erection was proposed. Finally, to evaluate the efficiency of the proposed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.134-146
• /
• 2006

This paper presents the primary conceptual design results of twenty-passenger class Wing-In-Ground(WIG) effect craft. As a first step, top level requirements were proposed and principal dimensions were determined. Maximum speed in ground effect condition is 150 km/h with two tons payload including passengers. Total weight is estimated as 8.5 tons with 2 tons of thrust. Hull and airfoil sections were designed and self propulsion tests were performed by radio controlled model. Two planing hull forms with the transom stern were proposed and towing tests were performed. The resistance and running attitude were measured and the feasibility is checked for the prototype hull form of the twenty-passenger class WIG craft. The free running tests show the stable smooth running attitude at designed speed. Also this radio controlled model can take off around 0.15 meter wave height. It can be said that the top level requirement for the twenty passenger class WIG ship is satisfied successfully. The design optimization to increase the transport efficiency and safety will be performed in the near future.

• 한국항공우주학회지
• /
• 제47권12호
• /
• pp.874-880
• /
• 2019

본 논문에서는 무인기의 경로 계획을 위한 맵 분할 방법론 중 하나인 Visibility Graph를 산악지형, 방공망, 그리고 레이더 등의 장애물이 존재하는 실제적인 3차원 환경에서 효율적으로 사용하기 위한 방안에 대해 서술한다. 기존의 가시성 그래프는 빌딩 사이를 주행하는 자율주행 자동차와 같이 주로 2차원 환경에서 간단한 형상의 장애물에 대해 연구되어왔다. 무인기 분야에서 사용하기 위해서는 고도 변화를 위해 3차원 가시성 그래프가 적용되어야 하는데, 3차원 가시성 그래프의 경우 2차원 환경에 비해 가시성을 판단해야 하는 노드 쌍이 매우 많아진다. 이에 더해 복잡한 다각형으로 이루어진 산악 지형은 가시성 그래프의 계산 시간을 더욱 상승시키는 요인으로 작용한다. 이러한 문제를 해결하기 위해 본 논문에서는 맵을 일정 고도로 분할하는 계층형 가시성 그래프 방식을 기반으로 복잡한 산악 지형을 Convex Hull 개념을 활용하여 노드 수를 감소시켜 계산 시간을 줄이는 방법에 대해 서술하며, 노드 수를 감소시키지 않은 상태와의 계산 시간을 비교한 결과 계산 시간이 약 99.5% 감소하였음을 확인하였다.

• 수산해양기술연구
• /
• 제37권4호
• /
• pp.308-312
• /
• 2001

이상에서와 같이 LCG위치에 따른 일련의 실험으로부터 다음과 같은 결론을 도출하였다. 1. 선형개발에 있어서 최적선형을 선정하고 이에 대한 성능검증의 일부로써 최적의 LCG위치를 찾는 것은 일반배치의 고려 및 실선에서의 운항 경제성 결정에 중요한 역할을 하며, 이와 같은 연구자료를 데이터 베이스화 함으로써 앞으로의 선형개발에 있어서 유용하게 쓰이게 될 것이다. 2. 저항시험 결과로부터 선미방향으로 LCG위치를 2% 포인트씩 이동하게 되면 서서히 저항이 감소하다가 8%포인트 위치에서 최저점을 이루며 이는 실선속도 25노트에서 초기상태(0%LCG)에 비해 만재상태에서는 약 12.4%, 시운전 상태에서는 약 10%의 저항감소효과가 있었다. 그 이후 (10%LCG)부터는 다시 저항이 증가하게 되는데, 이는 선수트림이 커지게 되면서 선저의 활주면에 과도한 동적 압력이 발생하게 되고, 저항감소의 원인이 되었던 침수표면적의 감소로 인한 마찰저항의 감소보다 동적압력에 의한 압력증가 영향이 더 커지게 된 것으로 추측된다. 3. 나선상태에서보다 스프레이스트립(spray strip) 및 스케그 등과 같은 선형에 적합한 부가물을 부착하면 저항감소 및 직진성능 (course keeping ability) 향상 등의 이점이 있다. (이 논문의 결론 부분임)

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.359-364
• /
• 2022

This study presents a nonlinear model predictive control (NMPC)-based obstacle avoidance and whole-body motion planning method for the mobile manipulators. For the whole-body motion control, the mobile manipulator with an omnidirectional mobile base was modeled as a nine degrees-of-freedom (DoFs) serial open chain with the PPR (base) plus 6R (arm) joints, and a swept sphere volume (SSV) was applied to define a convex hull for collision avoidance. The proposed receding horizon control scheme can generate a trajectory to track the end-effector pose while avoiding the self-collision and obstacle in the task space. The proposed method could be calculated using an interior-point (IP) method solver with 100[ms] sampling time and ten samples of horizon size, and the validation of the method was conducted in the environment of Pybullet simulation.

• 한국해양공학회지
• /
• 제28권6호
• /
• pp.493-499
• /
• 2014

The resistance performances were studied for two 50-ft-class power yachts made of carbon fiber reinforced plastic (CFRP) with different hull form characteristics using model tests. The tests were carried out at a high-speed circulating water channel (CWC) for the 16–38 knot range. The total resistance, trim, and sinkage were measured, and the results were compared with wave patterns. The results showed that a chine position at the draft line had a strong effect on the planning performance and resistance performance in a certain velocity range.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.152-160
• /
• 2024

In the event of a maritime accident, search plans have traditionally been planned using experiential methods. However, these approaches cannot guarantee safety when the scale of a maritime accident increases. Therefore, this study proposes a model utilizing discrete event simulation (DES) to predict the diving time for compartment searches of a ship located on the seabed. The discrete event simulation model was created by applying the DEVS formalism. The M/V Sewol sinking was used as an example to simulate how to effectively navigate compartments of different sizes. The simulation results showed the optimal dive time with the number of decompression chambers needed to navigate the compartment as a variable. Based on this, we propose a methodology for efficient navigation planning while ensuring diver safety.

• 대한조선학회논문집
• /
• 제44권1호
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.523-531
• /
• 2019

The low birthrate and the need for national defense reform in Korea drive the Navy to develop efficient human resource planning such as a manpower forecasting model. However, to our knowledge, there is no study exploring the manpower forecasting model for naval ships in Korea. The purpose of this paper is to develop a model for forecasting manpower demand in naval ships. Data for analyses were drawn from 19 ships in the Korean Navy. Results indicate that mission type is significantly related to the number of manpower. Specifically, battleships need the more manpower than the battle support ships. The results also showed that the weight of hull structure-engine and the weight of the weapons system significantly increased the number of manpower. However, the weight of the combat system was not significant. In addition, whereas the automation level of hull structure-engine and the automation level of weapon system was found to be negatively related to the number of manpower, the automation level of combat system was positively related to it. The model developed here contributes to an advanced human resource planning of the Korean Navy. Implications, limitations, and directions for future research are discussed.