• Journal of the Korean Society of Safety
• /
• v.3 no.2
• /
• pp.17-23
• /
• 1988

Planning controls for the hazardous situation from Petrochemical Complexes in residential areas requires on theoretical estimation of risks. Engineering criteria and standards should e interpreted as acceptable risks for the safety of industrial workers and the community arising from industrial accident. An approach to formulate a safety criteria as distance between the origin and object of hazards and their impact are discussed.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.74-79
• /
• 2013

Aiming at reducing deaths and injuries involving construction crane operations, OSHA has recently updated its 40-year-old crane safety standards with new rules addressing the use of cranes and derricks in construction. The goal of this change in rule is to deal with the leading causes of fatalities related to crane and derrick operations. Employers in the construction industry are mandated to ensure that employees in the work zone are trained to recognize hazards associated with the use of the equipment and any related duties that they are assigned to perform. However, those responsible at construction sites for the supervision and management of safe crane operations often lack the integrated knowledge of the standards, regulations and best practices for conducting or supervising daily, monthly, or quarterly inspection of cranes. As such, proper planning, management and implementation of crane operations, including inspections are just as paramount to reducing accidents on the construction site. It is important that engineers responsible for the management and planning of crane operations understand the latest OSHA crane and hoisting standards to ensure a safer work environment is maintained. Many on site engineers overseeing crane operations do not have adequate training, experience, and knowledge of the inspection requirements to assess safe crane operation and too often rely on the crane operator's judgement. This paper highlights recent research effort in defining significant changes in new crane and hoisting standards and provides basis for safety construction operations.

• Electronics and Telecommunications Trends
• /
• v.34 no.2
• /
• pp.101-109
• /
• 2019

Electrical energy storage (EES) systems store generated electricity in energy storage devices such as batteries and discharge the stored energy when necessary. Individual subsystems of the EES system are being standardized independently; however, a holistic understanding of the whole system is necessary because the EES system is large and complex. IEC TC 120 has developed international standards of EES systems. In this paper, EES systems standards in IEC TC 120, including the planning and installation of EES systems, are presented. Further, ongoing standardization for the application of EES systems to backup power and emergency support is described.

• Journal of the Korean Society of Costume
• /
• v.65 no.2
• /
• pp.125-143
• /
• 2015

This study is to propose an 'education-training-certificate of qualification' design of fashion accessories production, which can be applied to education in universities and individuals. It is based on the National Competency Standards (NCS), which was developed through the '2013 National Competency Standards Development Project' for the fashion accessories production. FGI (Focus Group Interviews), which is a research methodology, is carried out on target groups of educational experts and specialists in the field of fashion accessories production. Through this, five courses were suggested; first, 'fashion accessories design' course was proposed for the education and training of 'design development' and 'development of raw materials'. Secondly, 'fashion product production' course was proposed for the education and training of 'production of samples'. Thirdly, 'fashion product manufacture and planning' course was proposed for the competency element units: 'calculation of cost', 'determination of mass production model and price', 'planning of the main manufacturing process' and 'ordering of raw materials'. Lastly, 'mass production of fashion products' course and the 'field practice of fashion product manufacture' course were proposed for the competency element units: 'planning for mass production', 'preparation for mass production', 'mass production' and 'inspection of completed products'. In addition, a new certificate of 'technician of fashion accessory production' was proposed in order to test qualified skills for the fashion accessories production. The test is composed of a written examination of short-answer questions, technical drawing and production.

• The Journal of Korean Medicine
• /
• v.37 no.3
• /
• pp.97-111
• /
• 2016

Objectives: This study aims to investigate the policy status of traditional medicine standardization between Korea and China as well as to derive a strategic development plan for Korean medicine standardization. Methods: The existing national plans and preceding studies on traditional medicine standardization in Korea and China were reviewed, and scope of the study was categorized as having three main aspects: infrastructure; standard development and standardization activities; and application and diffusion. Results: Nine development plans for Korean medicine standardization derived under the study were as follows: With regard to infrastructure of standardization, 1) standardization plan of Korean medicine shall be established based on involvement of multi-government ministries. 2) It shall be set with a consistent cooperation process among standardization-related organizations, as well as 3) encourage the industry to participate in standardization activities. To activate standards development, 4) launching the R&D-standardization-industrialization linked project, 5) supporting Korean medicine society and the mirror committee for motivation, and 6) planning the international joint research for development of standard and expanding standardization activities are recommended. In the aspect of application, there is a need for 7) expanding certification systems for the industry and 8) evaluation and feedback on the life-cycle of standardization. Lastly, 9) educational programs for training experts of standardization shall be developed and implemented. Conclusions: In order to invigorate standardization activities for Korean medicine, enhancement of planning and evaluation capacity, ensuring the strategic development of standards, broadening boundaries of international standardization activities, and training professionals are required.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.6
• /
• pp.22-33
• /
• 2009

This study was undertaken to provide a basis for planning trail standards, providing rights of movement, improvement of health and the experience of nature for at-risk walkers for application to the Umyen Park site. This study researched related laws, manuals, scholastic writing and the established site, a raku-raku mountain trail in Osata, Japan. By referencing these results and similar standards, a conceptual trail plan for at-risk walkers was created. The plan suggests five points -- accessibility, convenience, social aspects, economic efficiency, and environmentally-friendliness -- and referenced an evaluation of outdoor living environments for the elderly. The planning standards are comprised of four steps that are ranked in order and are related to the selection of location, trail structure, route patterns, and equipment. Plans for trails catering to at-risk walkers in Umyen Park were then based on these standards. As a result, it was found that the mountain has both a high elevation and abundant natural resource, both of which must be taken into account during planning. This study is valuable because it is one of the first studies of trail plans for at-risk walkers made in mountainous urban parte. Subsequent research can use the standards of this study for further evaluation while future modifications must reflect changing needs and details.

• World Technopolis Review
• /
• v.3 no.2
• /
• pp.97-108
• /
• 2014

The importance of a science park as an instrument of economic development has been realized by developed economies for past three decades. To comprehend the same, developing economies are also planning and implementing science park ventures. However, in terms of planning, science parks are not objects of global consensus because unlike hotel and restaurant chains, which could be planned with similar standards in different regions or countries, there is no single global standard that can be best-fit for science parks. To meet the need for a better understanding of planning, this research studied science parks in developed and developing economies to identify factors that are globally used in this context. This research also extends our knowledge of best practices for growth, governance and sustainability in science parks, and highlights future trends and external factors that may contribute significantly during planning.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.4
• /
• pp.43-53
• /
• 1994

This Study is to construct the Activity System Methods of Site Planning and Design. A planned spaces and facilities is considered usually in relation to users of space and facilities, user attributes, needs and values, and activity patterns. Information obtained form this study adds a qualitative dimension to the quantitative emphasis and supplies information for design-oriented analyses of site planning. In the design-oriented aspect, the concern is with devising desirable land use arrangements and facility supply considering objectives defined in the public interest. The design-oriented approache in site planning and design must use information on activity systems and space qualities in defining planning and design requirements of site development-one in the form of principles and standards of design used in land use and facility planning guidelines, and the other form of input variables for land use model and facility supply model.

• International journal of advanced smart convergence
• /
• v.10 no.3
• /
• pp.59-65
• /
• 2021

In this paper, we propose the AI certification standardization activities for systematic research and planning for the standardization of trustworthy artificial intelligence (AI). The activities will be in two-fold. In the stage 1, we investigate the scope and possibility of standardization through AI reliability technology research targeting international standards organizations. And we establish the AI reliability technology standard and AI reliability verification for the feasibility of the AI reliability technology/certification standards. In the stage 2, based on the standard technical specifications established in the previous stage, we establish AI reliability certification program for verification of products, systems and services. Along with the establishment of the AI reliability certification system, a global InterOp (Interoperability test) event, an AI reliability certification international standard meetings and seminars are to be held for the spread of AI reliability certification. Finally, TAIPP (Trustworthy AI Partnership Project) will be established through the participation of relevant standards organizations and industries to overall maintain and develop standards and certification programs to ensure the governance of AI reliability certification standards.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.69-80
• /
• 2016

This study investigated the National Competency Standards (NCS) of fashion planning to compare the fashion planning curriculum of domestic universities and colleges with NCS as well as suggest ways to activate the application of NCS to fashion planning education. Qualitative research was employed based on references from the old and new homepages of NCS as well as fashion planning related subjects of domestic universities and colleges. The results are as follow. First, fashion planning NCS was composed of 10 competency units. Competency units were composed of competency unit elements and performance criteria. The levels of the competency units and the competency unit elements were suggested based on 8 stages. There were significant differences in the content of competency units and the level of competency units between the old version and the revised version of fashion planning NCS. Second, considerable fashion planning related subjects seemed at a higher level than the function level of recent college graduates. There were also omitted subjects which were required for recent college graduates. Third, the requirements for the reorganization of curriculums and education systems as well as the cooperation among industry, colleges, universities, and development part of NCS were suggested for the activation of NCS based education and the validation of NCS.