• 한국수산과학회지
• /
• 제44권4호
• /
• pp.413-422
• /
• 2011

An improved split-beam transducer for a 50 kHz fish-sizing echo sounder was developed. The main objective of this study was to minimize the side lobe level in the beam pattern and the distance between acoustic centers for adjacent transducer quadrants in the geometrical arrangement of array elements while maintaining a given number of transducer elements and beam width. To achieve these goals, a 32-element planar array transducer ($6{\times}6$ array with one element in each corner missing) was designed using the Dolph-Chebyshev shading function to suppress side lobes in the array beam pattern and fabricated by arranging the inter-element spacing to be substantially equal to half the wavelength using the transducer element of 0.4 times the wavelength in diameter. The performance characteristics of this split-beam transducer were evaluated in the experimental water tank of $5m{\times}5m{\times}6m$ (length${\times}$height${\times}$width). In this study, the design goal of the beam width and side lobe level for transmitting a beam pattern was initially set at $21^{\circ}$ and -30 dB, respectively. However, the measured beam width at 3 dB was $21^{\circ}$ in both directions with side lobe levels of -24.7 dB in the horizontal plane and -25.6 dB in the vertical plane. The averaged beam width at -3 dB of the receiving beam patterns for four receiving quadrants was $31.4^{\circ}$. The transmitting voltage response was 161.5 dB (re $1{\mu}Pa$/V at 1 m) at 50.23 kHz with a bandwidth of 2.16 kHz, and the averaged receiving sensitivity for four receiving quadrants was -178.13 dB (re 1 V/${\mu}Pa$) at 49.8 kHz with a bandwidth of 2.64 kHz.

• 한국통신학회논문지
• /
• 제31권3A호
• /
• pp.321-327
• /
• 2006

본 논문은 접지된 유전체 평면 위에 균일한 저항율을 갖는 저항띠 격자구조로 임의의 방향으로 입사되는 H-분극 전자파산란 문제를 모멘트 법으로 해석하였다. 기존의 논문에서는 전류밀도의 분포에 따라 기저함수를 다양한 직교다항식으로 변경하여 I-분극의 경우만 수치해석 하였다. 반면에, 본 연구에서는 각 저항띠의 양끝에서 유도 전류밀도가 0 이 되도록 cosine 함수와 sine 함수로 구성된 다항식의 급수로 나타내었다. 산란 전자계는 주기적인 구조에 대응시킬 수 있는 Floquet 모드함수의 급수로 전재하였으며, 미지의 계수를 구하기 위하여 경계조건을 적용하였다. 또한, Fourier-Galerkin 모멘트 법을 적용함으로서 접지된 유전체 위에 여러 가지 저항율을 갖는 저항띠에 대하여 기하광학적인 정규화 된 반사전력에 관한 스트립 폭 및 주기, 입사각의 영향을 수치해석 하였다.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.656-663
• /
• 2007

본 논문은 접지된 2중의 유전체 평면 사이에 변화하는 저항율을 갖는 저항 띠 격자 구조로 임의의 각도로 입사되는 E-분극 전자파 산란 문제를 모멘트 법으로 해석하였다. E-분극 산란에서는 저항 띠의 모서리 양끝에서 유도되는 전류 밀도가 매우 높을 것으로 예측되므로, 이 특성과 일치하는 기저 함수를 직교 다항식 일종인 2종 Chebyshev 다항식의 급수로 전개하여 수치 해석하였다. 산란 전자계는 주기적인 구조에 대응시킬 수 있는 Floquet 모드 함수의 급수로 전개하였고, 미지의 계수를 구하기 위하여 경계 조건을 적용하였다 또한, Fourier-Galerkin 모멘트 법을 적용함으로써 접지된 2중의 유전체 사이에 다양한 저항율을 갖는 저항 띠에 대해 기하광학적인 정규화 된 반사 전력에 관한 스트립 폭과 주기, 입사각의 영향 등을 수치 해석하였다.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.287-295
• /
• 1998

흙 사면의 안정성 해석에는 한계평형법이 널리 사용되고 있다. 그러나 절 리가 발달한 암반사면의 파괴는 절리의 거동에 지배를 받으므로 절리의 방향성과 파괴특성이 동시에 고려되어야 한다. 본 논문에서는 이러한 암반사면의 안정성해석을 위하여 임의방향으로 발달한 두 조의 절리군을 고려할 수 있는 편재절리모델을 사용하여 사면과 절리의 상대적인 방향성이 사면의 안전율에 어떠한 영향을 주는지 살펴보았다. 이를 위하여 이미 개발된 바 있는 비등방 탄소성 모델을 사면안정 해석에 적용할 수 있도록 수정하였으며, 안전율 계산 routine을 상용프로그램인 FLAC인 FISH macro 언어를 사용하여 작성하였다. 개발된 모델의 검증을 위하여 1요소에 대한 직접전단시험을 수치해석적으로 수행하였고, 안전율이 1인 흙사면을 선택하여 서로 수직인 2조의 절리군이 발달한 암반의 안정성 해석을 수행하여 Culmann의 평면파괴해와 비교하였다. 또한 UDEC에 의한 해석을 수행하여 사면파괴양상을 비교하였다. 절리의 간격이 충분히 작을 경우 편재절리모델은 정확한 결과를 나타내어 절리암반사면의 설계 및 안정성 해석에 활용될 수 있을 것으로 생각된다.

• 한국추진공학회지
• /
• 제9권2호
• /
• pp.97-104
• /
• 2005

많은 장점에도 불구하고 유동함수를 이용한 수치해석용 격자생성 좌표변환기법의 단점은 저속영역에서의 격자간격이 고속영역에 비해 상대적으로 큼에 따라 수치적 처리에 많은 오차를 내포하고 있다는 점이다. 본 연구에서는 이러한 저속영역에서의 단점을 보완하기 위하여 격자간격을 속도크기 및 영역에 따라 적절히 조절할 수 있도록 수학적으로 변형된 압축성 유동함수를 이용한 좌표변환기법을 제안하고 가스터빈엔진에 주로 적용되는 유동모델로서 동심원상 두개 이상의 난류제트혼합유동에 대해 적용하였으며 해당 실험치, 즉 축 방향 평균속도분포, 난류운동에너지, 그리고 난류전단응력분포와 비교하여 난류운동에너지가 약간 과소평가 된 대칭축을 제외한 혼합경계층 내에서 $3.5\%$ 이내의 신뢰성을 확보하였다. 본 기법은 특히 터보팬엔진에 대한 내부흐름들의 혼합유동을 규명하거나 또는 난류전단응력에 의한 제트소음발생 및 저감방법을 도모하는데 유용하게 활용될 것으로 기대된다.

• Advances in materials Research
• /
• 제2권1호
• /
• pp.37-49
• /
• 2013

The transition metal salt doped solid polymer electrolyte [TSPE] were prepared with HPMC as a host polymer. The virgin and doped films were prepared by solution-casting method and investigated using wide angle X-ray scattering method. Micro structural parameters like lattice strain (g%), stacking/twin faults, the average number of unit cells counted in a direction perpendicular to the Bragg's plane (hkl) spacing of (hkl) planes dhkl, crystallite size Ds, distortion width, standard deviation were determined by whole pattern powder fitting (WPPF) method, which is an extension of single order method. It is found that the crystallite size decreases with the increase in the content of $FeCl_3$. This decrease is due to increase in localized breaking of polymer network which also accounts for the amorphous nature of the material. The filler inorganic salt $FeCl_3$ acts as plasticizer. FTIR study also confirms and justifies the interaction between the polymer and in-organic salt in the matrix. Physical properties like mechanical stability and Ac conductivity in these films are in conformity with the X-ray results.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.254-259
• /
• 2012

This paper presents a closely spaced two-element folded-dipole-driven quasi-Yagi array with low mutual coupling between adjacent elements. The antenna utilizes a T-junction power divider as the feeding network, with an input impedance of $50{\Omega}$. A microstrip-stub is added to the ground plane in the middle of the two elements to improve the mutual coupling characteristics. The folded dipole driver is connected to a $50{\Omega}$ microstrip line via a broadband microstrip-to-coplanar stripline transition with a quarter radial stub. A mutual coupling of less than -22 dB is measured between two folded-dipole-driven quasi-Yagi antennas with a center-to-center spacing of 30 mm ($0.55{\lambda}_0$ at 5.5 GHz). The proposed quasi-Yagi array yields a measured bandwidth of 4.75~6.43 GHz for the -10 dB reflection coefficient and a gain of 6.14~7.12 dBi within the bandwidth range.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.641-651
• /
• 2017

Ground improvement with use of geosynthetic products is globally accepted now. The present paper discusses the improvement in bearing capacity of square footing placed at surface of cohesionless soil reinforced with geocell. Mohr-Coulomb failure criterion has been used in the observations. To study effects of geocell with respect to planar geogrid, model tests were conducted on planar reinforcement also. A comparative study of unreinforced soil and soil reinforced with plane geogrid and geocell has also been made. Numerical analysis results obtained by PLaxis have been compared with those obtained from model tests and were found to be in good agreement. A parametric study revealed the role of length of reinforcement, spacing between layers, placement of reinforcement from top surface etc. on bearing capacity. A design example given in paper illustrates the savings in cost of construction of footing on reinforced sand. The study shows that there is improvement in bearing capacity with respect to unreinforced soil which is of the order of 86%. Similarly settlement reduction is 13.07% for single layer of geocell which for double layers of geocell is 693% and 86.48% respectively. The cost reduction in case of reinforced soil is 35% as compared to unreinforced soil.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.195-203
• /
• 2000

The local heat/mass transfer coefficients for arrays of impinging circular air jets on a plane surface are determined by means of the naphthalene sublimation method. Fluid from the spent jets is constrained to flow out of the system in one direction. Therefore, the spent fluid makes a crossflow in the confined space. The present study investigates effects of jet-orifice-plate to impingement-surface spacing and jet Reynolds number. The spanwise- and overall-averaged heat/mass transfer coefficients are obtained by numerical integrating the local heat transfer coefficients. The local maximum heat/mass transfer coefficients move further in the downstream direction due to the increase of crossflow velocity. At the mid-way between adjacent jets, the heat/mass transfer coefficients have a small peak owing to the collision of the adjacent wall jets and are affected strongly by the crossflow. The effect of the crossflow occurs strongly at the small orifice-to-impingement surface distance.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2367-2374
• /
• 1996

A generalized Scheil equation for the solute redistribution in the absence of the back diffusion during the dendritic solidification of binary alloys is derived, in which coarsening of the secondary dendrite arms is taken into account. The obtained equation essentially includes the original Scheil equation as a subset. Calculated results for typical cases show that the coarsening affects the microsegregation significantly. The eutectic fraction predicted for coarsening is considerably smaller than that for fixed arm spacing. The most important feature of the present equation in comparison with the Scheil equation lies in the fact that there exists a lower limit of the initial composition below which the eutectic is not formed. Based on the generalized Scheil equation and the lever rule, a new regime map of the eutectic formation on the initial composition-equilibrium partition coefficient plane is proposed. The map consists of three regimes: the eutectic not formed, conditionally formed and unconditionally formed, bounded by the solubility and diffusion controlled limit lines.