• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1333-1354
• /
• 2015

A higher order analytical solution for static analysis of a truncated conical composite sandwich panel subjected to different loading conditions was presented in this paper which was based on a new improved higher order sandwich panel theory. Bending analysis of sandwich structures with flexible cores subjected to concentrated load, uniform distributed load on a patch, harmonic and uniform distributed loads on the top and/or bottom face sheet of the sandwich structure was also investigated. For the first time, bending analysis of truncated conical composite sandwich panels with flexible cores was performed. The governing equations were derived by principle of minimum potential energy. The first order shear deformation theory was used for the composite face sheets and for the core while assuming a polynomial description of the displacement fields. Also, the in-plane hoop stresses of the core were considered. In order to assure accuracy of the present formulations, convergence of the results was examined. Effects of types of boundary conditions, types of applied loads, conical angles and fiber angles on bending analysis of truncated conical composite sandwich panels were studied. As, there is no research on higher order bending analysis of conical sandwich panels with flexible cores, the results were validated by ABAQUS FE code. The present approach can be linked with the standard optimization programs and it can be used in the iteration process of the structural optimization. The proposed approach facilitates investigation of the effect of physical and geometrical parameters on the bending response of sandwich composite structures.

• 전산구조공학
• /
• 제3권1호
• /
• pp.97-107
• /
• 1990

본 연구에서는 쉘구조물의 해석을 위한 개선된 degenerated 쉘유한요소를 제시하였다. 본 연구의 개선된 degenerated 쉘요소는 shear locking 해결에 우수한 결과를 보인 가정된 전단변형도를 사용하고, membrane locking 현상을 제거하기 위해 평면내 변형도의 구성시 감차적분을 행하며, 쉘요소자체의 거동을 보완하기위해 비적합 변위형을 선택적으로 추가하였다. 본 요소는 기존 degenerated 요소계열에서 가장 큰 문제점중의 하나인 locking 현상과 전달가능한 거짓영에너지모드가 발생하지 않으며, 조각시험도 통과한다. 본 개선된 쉘요소의 거동을 알아보기위해 다수의 예제시험을 행하였다. 수치시험결과 본 요소는 빠른 수렴성과 안정성을 보여준다.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.615-626
• /
• 2010

The discrete-layer model is proposed to analyze the edge-effect problem of laminates under extension and flexure. Based on three-dimensional elasticity theory, the displacement fields of each layer in a laminate have been treated discretely in terms of three displacement components across the thickness. The displacement fields at bottom and top surfaces within a layer are approximated by two-dimensional shape functions. Then two surfaces are connected by one-dimensional high order shape functions. Thus the p-convergent refinement on approximated one- and two-dimensional shape functions can be implemented independently of each other. The quality of present model is mostly determined by polynomial degrees of shape functions for given displacement fields. For nodal modes with physical meaning, the linear Lagrangian polynomials are considered. Additional modes without physical meaning, which are created by increasing nodeless degrees of shape functions, are derived from integrals of Legendre polynomials which have an orthogonality property. Also, it is assumed that mapping functions are linear in the light of shape of laminated plates. The results obtained by this proposed model are compared with those available in literatures. Especially, three-dimensional out-of-plane stresses in the interior and near the free edges are evaluated and convergence performance of the present model is established with the stress results.

• Journal of information and communication convergence engineering
• /
• 제17권4호
• /
• pp.246-254
• /
• 2019

This paper proposes a solution to the problem of finding a subgraph for a given instance of many terminals on a Euclidean plane. The subgraph is a tree, whose nodes represent the chosen terminals from the problem instance, and whose edges are line segments that connect two corresponding terminals. The tree is required to have the maximum number of nodes while the length is limited and is not sufficient to interconnect all the given terminals. The problem is shown to be NP-hard, and therefore a genetic algorithm is designed as an efficient practical approach. The method is suitable to various probable applications in layout optimization in areas such as communication network construction, industrial construction, and a variety of machine and electronics design problems. The proposed heuristic can be used as a general-purpose practical solver to reduce industrial costs by determining feasible interconnections among many types of components over different types of physical planes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.248-251
• /
• 2005

To investigate the degeneration process in the intervertebral disc, a three dimensional (3D) poroelastic finite-element (FE) model was developed. Disc was modeled as two different regions, such as annulus modeled with fiber reinforced 20 node poroelastic ground matrix and nucleus having large porosity. Excess Von Mises stress in the disc element assumed to be a possible source of degeneration under compressive loading condition. Recursive calculation was continued until the desired convergence was attained by changing the permeability and porosity of those elements, which could be predicted from the previous iteration. The degenerated disc model showed that relatively small compressive stresses were generated in the nucleus elements compared to normal disc. Its distribution along the sagittal plane was matched well with a previously reported experimental result. Contrasts to this result, pore pressures in the nucleus were higher than those in the normal disc. Total stress indicated similar values for two different models. This new approach using poroelastic modeling could provide the explanation of the interaction between fluid and solid matrix in the disc during the degeneration process.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1290-1300
• /
• 1996

The finite element method, based on rigid-plastic formulation, is widely used to simulate metal forming processes. In order to improve the computational efficiency of the rigid-plastic FEM, one-point integration is used to evaluate the stiffness matrix with four-node rectangular elements and eight-node brick elements. In order to control the hourglass modes, hourglass strain rate components were introduced and included in the effective strain rate definition, Numerical tests have shown that the proposed one-point integration scheme reduces the stiffness matrix evaluation time without deteriorating the convergence behavior of Newton-Raphson method. Simulations of a ring compression, a plane-strain closed-die forging and the three-dimensional spike forging processes were carried out by using the proposed integration method. The simulation results are compared to those obtained by applying the conventional integraiton method in terms of the solution accuracy and computational efficiency.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.670-676
• /
• 2008

VoIP 서비스는 인터넷 기반기술을 사용하므로 인터넷망에서 발생하는 보안위협이 내재해 있고 실시간 서비스 특성으로 기존 보안솔루션의 수정이나 변경 없이 보호하기는 어려운 면이 있고,단일 망으로 음성 데이터 통합서비스를 제공하기 때문에 상대적으로 데이터 망만을 보호하기 위한 노력과 비용이 복잡해지고, IP망에서 발생 가능한 보안 위협이 내재되어 있고, 단일 망으로 음성 데이터 통합서비스를 제공하기 때문에 상대적으로 데이터 망만을 보호하기 위한 노력과 비용이 복잡해지고, IP망에서 발생 가능한 보안 위협이 내재되어 있다. 본 논문에서는 VoIP 스팸에 대한 정의와 VoIP 스팸 기술에 대한 분석 그리고 VoIP 스팸을 막을 수 있는 여러 가지 대응방법들에 대해서 설명을 하도록 한다.

• Journal of information and communication convergence engineering
• /
• 제16권4호
• /
• pp.252-257
• /
• 2018

A wideband double radiator circular disc annular monopole antenna is proposed is this work. The radiators are etched on the surfaces of two Taconic TLY-5 substrates with a circular hole cut out of each of the radiators initially at the centers of the radiators with subsequent downward displacement of the holes. The antenna is designed with a two-step feeding transformer system for impedance matching between the input power source supplied by a $50-{\Omega}$ SMA connector and the monopole radiators. The transformer system improves the bandwidth performance at higher frequencies. The proposed antenna achieves a wideband having the capability of working between 0.645 and 18.775 GHz, corresponding to a -10 dB bandwidth of 186.7% with gain ranging from 0.95 to 8.26 dBi. In comparison to other metal disc planar monopole antennas, the proposed antenna has a small total size width due to the size of the ground plane, which has a diameter 100 mm. The frequency range of the antenna provides applications in global positioning systems, mobile communications, ultra-wideband short distance communications, and wireless computer networks.

• 융합경영연구
• /
• 제8권2호
• /
• pp.19-26
• /
• 2020

Purpose: The goal of this study is to comprehensively grasp the current status of ecommerce and to use as basic data for information-related policies. In this work, we understand recent ecommerce utilization, purchasing business by main factors, and look over the association between business type on sales orders (BTSO) and three variables: region, occupation and group type. Research design, data and methodology: The resource of this research is obtained by Ministry of Science and Technology Information and Communication in 2017, and investigated about 14,000 national business samples. Two statistical methods are used to analyze the association between the three variables: chi-square test and correspondence analysis. Results: The findings show that BTSO is pairwise associated with thee categorical variables, and the association between the categories of the two variables can be visually examined on two dimensional plane. Conclusions: This study suggests 'household & individual consumers' among BTSO are closely connected with 'Chungbuk' and 'Kyungnam' for region, 'others', 'finance & insurance' and 'association, repairing & other personal service' for occupation, and 'national & local government' for group type. Additionally, 'other companies' among BTSO are, particularly, related to 'Chunnam' for region, 'manufacturing industry' for occupation, and 'company corporations' for group type.

• Journal of information and communication convergence engineering
• /
• 제19권2호
• /
• pp.114-119
• /
• 2021

This paper proposes a method to find an optimal T' with the most terminal of the subset of T' trees that can be connected by a given length by improving a memetic genetic algorithm within several constraints, when the set of terminal T is given to the Euclidean plane R². Constraint (1) is that a given length cannot connect all terminals of T, and (2) considers only the rectilinear layout of the edge connecting each terminal. The construction of interconnections has been used in various design-related areas, from network to architecture. Among these areas, there are cases where only the rectilinear layout is considered, such as wiring paths in the computer network and VLSI design, network design, and circuit connection length estimation in standard cell deployment. Therefore, the heuristics proposed in this paper are expected to provide various cost savings in the rectilinear layout.