• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.956-963
• /
• 2002

A linearly polarized folded type and H-shape slit folded type microstrip patch antenna at GPS(center frequency:1.575 GHz) were designed and fabricated by folding a conventional single $\lambda_{g}/2(\lambda_{g}:wavelength)$ rectangular patch a half along the length direction at the center of patch and inserting ground plane in the middle. As a result, two types of omnidirectional radiation patterns for E-plane (for zx-plane) in the direction of the length of patch and H-plane (for xy-plane) have been acquired. The experimental results show that the average gains of folded type and slit folded type for omnidirectional E-plane and H-plane are -1.5 dBd (-2.4 dBd) and -3.27 dBd(-2.5 dBd). Slit folded type microstrip patch antenna was more miniaturized than folded type microstrip patch antenna by 27.5 %. In case of slit folded type antenna, average gains of omnidirectional radiation pattern for E & H-plane are almost same.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.2
• /
• pp.27-34
• /
• 2012

This study aims to examine and classify plane types of Hanok at Haengbok village, analyze changes, area distribution and space structures of space components and sort plane types and their characteristics. Plane types were divided into four; living room, kitchen, dining room, etc. These plane types were labelled as LK type, L+K type, L+DK type and LDK type. LK type and L+K type were mainly found at single-wing house and made of living room and kitchen centered space structure, but substantially they were designed to ensure guest room, room and living room. Therefore, hanok built at Haengbok village were designed to combine the functions of residential function and lodging. Plane type was preferred to be used for double functions of residence and lodging. On the other side, L+DK type and LDK type were mainly found in house with several wings and they were designed centering around living room for family space. In addition entrance was placed to simplify entry from the outside and each room and guest room were arranged to be accessed from living room. It means that the functions of house focused on residence rather than lodging and all rooms had the structure to be used as residential space in case of emergency.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.16-26
• /
• 1998

This paper presents a design methodology for magnetically tunable X-band E-plane type waveguide filters. The proposed design is based on using of quarter wavelength transmission line for compensating the negative length transmission line of end K-inverters of E-plane type waveguide filters. The derived formulae are applied for initial design and the correction method is also provided for final design by considering the frequency dependent characteristic of K-inverters. The analysis results of E-plane pype waveguide structure loaded with ferrite slab are obtained using the edge based finite element method including higher order mode effecets. It is shown that the unilateral finline E-plane type waveguide filter as well as the bilateral finline E-plane type waveguide filter achieves the the manetically tunable characteristic. The X-band experimantal results for bilateral and unilateral finline E-plane type waveguide filters agree well with the simulated data.

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.869-880
• /
• 1992

The purpose of this study was to evaluate the difference and relationship between the slope of articular eminence and the inclination of upper and lower incisor teeth, which are related to the functional stability of occlusion in mandibular protrusion, according to Ricketts' facial types, by the use of lateral cephalogram and SAM2 articulator in 68-adult normal occlusion without tooth missing, orthodontic treatment and occlusal equilibration. The results of this study were as follows : 1 . The angle of articular eminence slope to occlusal plane in brachyfacial type was steeper than that in dolichofacial type, but the angle of articular eminence slope to SN plane and FH plane was not different between facial types. 2. The upper incisor axis in dolichofacial type was steeper than that in brachyfacial type, but lingual surface slope of upper incisor was not different between facial types. 3. In all samples there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to SN plane, FH plane and occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the lingual surface slope of upper incisor to occlusal plane. 4. In all samples there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane, and in mesofacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to occlusal plane, and in brachyfacial type there was a positive correlation between the angle of articular eminence slope and the angle of Dc-Gn to SN plane and FH plane. 5. In all samples there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane and FH plane, and in mesofacial type there was a positive correlation between the angle of Dc-Gn and the lingual surface slope of upper incisor to SN plane. 6. In all samples and facial types there was a negative correlation between MP to 1 axis and condylar incisal angle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.148-148
• /
• 2011

일반적으로 LED 제작에 사용되는 c-plane GaN는 c축 방향으로 발생하는 분극의 영향을 받게 된다. 분극은 LED내 양자우물의 밴드를 기울게 하여 그 결과 전자와 홀의 재결합 확률을 감소시켜 낮은 내부양자효율을 가지게 된다. 이러한 문제를 해결하기 위한 여러 가지 방법들이 제시되었는데 그 중에서도 특히 a-plane 혹은 m-plane면과 같은 무분극 면을 사용하는 GaN LED가 주목받고 있다. 그 이유는 무분극 면은 분극이 발생하는 c축과 수직이기 때문에 분극의 영향을 받지 않아 높은 내부 양자효율을 가질수 있다. 본 연구에서는 MOCVD 장비를 사용하여 2인치 r-plane 사파이어 기판위에 3um두께의 a-plane GaN을 성장하였다. 그위에 2um정도로 Si을 도핑하여 n-type GaN 형성한후 단일 양자우물, 그리고 Mg을 도핑하여 p-type GaN을 성장하였다. 장파장대역의 a-plane LED의 특성을 알아보기 위해서 양자우물 형성시 In의 조성비를 높였다. 일반적인 포토리소그래피 공정과 Dry etching 공정을 사용하여 메사구조를 형성하였으며 Ti/Al/Pt/Au와 Ni/Au를 각각 n-type과 p-type의 전극 물질로 사용하였다. 제작된 LED의 특성을 파악하기 위해서 인가전류를 0부터 100mA까지 출력 스펙트럼을 측정하였으며 orange대역의 파장을 갖는 LED를 얻었다. 인가전류별 Peak 파장의 변화와 반측폭의 변화를 파악하여 장파장 대역의 a-plane LED의 특성을 확인하였다.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.139-146
• /
• 2015

In this study, the plane type of main building relics of unified Silla period house site which excavated in Gyeongju city after 1990s was classified and the architectural characteristic of them was investigated. The chronology of building relics in Silla capital city site was mostly known as 8-9th century, and by standard of column arrangement, the plane types of them could be classified as grid type, front veranda-grid type, outer column type. The outstanding characteristic of plane is wide span and open front veranda. In most relics the span were over 4 meters, and inner foundations for small post and strip foundation were found between columns. The front veranda added type buildings were composited of enclosed main room and open front veranda, and column arrangement of them dose not fall into line in most case. Thus it thought that the structures of enclosed main room and open front veranda were independent. The interior space of enclosed main room were divided two rooms by partition wall in some case. In this case, one room is enclosed by wall, and the other room has open front side. This plane is considered for the pleasant life in cold winter and hot summer.

• Kyungpook Mathematical Journal
• /
• v.54 no.1
• /
• pp.1-9
• /
• 2014

We build new Hilbert-type integral inequalities in the whole plane with the non-homogeneous kernel involving some parameters and the best constant factors. We also consider their reverse.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.128-133
• /
• 2005

An iris-coupled partial H-plane filter as a new type of partial H-plane filter is proposed. The proposed filter can be compared with conventional H-plane filter and uses an iris-type evanescent waveguide as a coupling structure. Filter design technique based on numerical simulation is developed to design and compare the proposed filter and H-plane filter. Designed iris-coupled partial H-plane filter has the same frequency response as that of the conventional H-plane filter while its cross section is one quarter. A good agreement between measurements and theoretical prediction is achieved.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.220-224
• /
• 2011

Die-upset magnets from a mechanically-milled Pr(Co,In)$_5$-type alloy are known to have a peculiar texture; the easy magnetization axis (c-axis) is perpendicular to the pressing direction. This peculiar texture is thought to be linked closely to the anisotropic mechanical properties of Pr(Co,In)$_5$-type hexagonal compounds. The hardness of the Pr(Co,In)$_5$-type crystal was measured using selectively grown grains in an annealed $Pr_{17}Co_{82}In_1$ alloy button, and the crystallographic orientation was determined by observing the magnetic domain image. The hardness (549 VHN) on the plane with a 'cogwheel'-type domain image was significantly higher than that (510 VHN) on the plane with a 'cigar'-type domain image, indicating that the inter-layer bonding force between the (000l) basal planes is stronger than that between the (hki0) planes. This suggests that the most probable slip plane is the (hki0) plane parallel to the c-axis. During die-upsetting of the Pr(Co,In)$_5$-type alloys the deformation proceeds by (hki0) plane slip, and the c-axis rotates to ultimately become oriented perpendicular to the pressing direction. It is proposed that the peculiar texture in the die-upset Pr(Co,In)$_5$-type magnets is probably developed by slip deformation of the (hki0) plane of the Pr(Co,In)$_5$-type grains.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.112-117
• /
• 2001

The factor affecting on the fatigue strength of spot welded specimen have been studied. To analyze and predict crack initiation position and propagation directions on the spot welded area are very important for strength design of the automobile body structure. In fact, there are a various of loads in running automobile but, it is impossible to replay like an actual conditions in the laboratory. So, in this study tensile-shear type and in-plane bending type specimens were used in fatigue test and includes an analysis of fatigue crack initiation position and propagation directions about earth specimens. The results obtained in the present study are summarized as follows: 1. In tensile-shear type fatigue test, the region of fatigue crack initiation position was affected by out-of-plane bending deformation due to bending angle. 2 In in-plane bending type fatigue test, the behavior of fatigue crack initiation position and propagation derections due to angle between upper plate and lower plate was dominated by magnitude of in-plane bending moment.