• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4541-4554
• /
• 2019

This paper proposes a planar projection DV-hop location algorithm (PTCDV-hop) based on the LED semi-angle at half power (SAHP, which accounts for LED SAHP characteristics in visible light communication (VLC)) and uses the DV-hop algorithm for range-free localization. Distances between source nodes and nodes positioned in three-dimensional indoor space are projected onto a two-dimensional plane to reduce complexity. Circles are structured by assigning source nodes (projected onto the horizontal plane of the assigned nodes) to be centers and the projection distances as radii. The proposed PTCDV-hop algorithm then determines the position of node location coordinates using the trilateral-weighted-centroid algorithm. Simulation results show localization errors of the proposed algorithm are on the order of magnitude of a millimeter when three sources are used. The PTCDV-hop algorithm has higher positioning accuracy and stronger dominance than the traditional DV-hop algorithm.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.5
• /
• pp.90-102
• /
• 1993

In this paper, we propose a prgressive image transmission technique using hierarchical pyramid data structure which is constructed based on the projection data of an image. To construct hierarchical Gaussian pyramids, we first divide an image into 4$\times$4 subblocks and generate the projection data of each block along the horizontal, vertical, diagonal, and antidiagonal directions. Among images reconstructed by backprojecting the projection data along a single direction, the one giving the minimum distortion is selected. The Gaussian pyramid is recursively generated by the proposed algorithm and the proposed Gaussian images are shown to preserve edge information well. Also, based on the projection concept a new transmission scheme of the lowest Laplacian plane is presented. Computer simulation shows that the quantitative performance of the proposed pyramid coding technique using projection concept is similar to those of the conventional methods with transmission rate reduced by 0.1 ~ 0.2 bpp and its subjective performance is shown to be better due to the edge preserving property of a projection operation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.3
• /
• pp.183-192
• /
• 2013

As a worldwide trend, the spatial information that is established by country, institution and purpose is integrated into the data with a single spatial reference to improve the data connectivity and usability. In this study, a new national single origin plane rectangular coordinate system was studied to efficiently respond to the changes in the spatial reference according to the introduction of a new national geodetic standard and to the demand of seamless data service in the spatial information sector. For this purpose, the Korean Peninsula was set as the projection region and the projection distortion in the projection region was analyzed. The projection parameters were defined to homogenize and minimize the projection distortion, and their standardization and registration on the international organizations were conducted. The study on the required optimal projection equation resulted in the Hooijberg projection equation and projection parameters (${\Phi}$, ${\lambda}$, K, N, E) resulted in $38^{\circ}N$ and $128^{\circ}E$ projection origin, and a scale factor of 0.99924. The proper false northing and easting were 700,000m N and 400,000m E, respectively, considering the introduction of country station index system.

• The Journal of the Korea Contents Association
• /
• v.9 no.9
• /
• pp.97-104
• /
• 2009

This paper describes comparison and analysis of methodology which enables us in order to search the projection technique of optimum for projection in the plane. For this methodology, we applies the high-dimensional facial motion capture data respectively in linear and nonlinear projection techniques. The one core element of the methodology is to applies the high-dimensional facial expression data of frame unit in PCA where is a linear projection technique and Isomap, MDS, CCA, Sammon's Mapping and LLE where are a nonlinear projection techniques. And another is to find out the methodology which distributes in this low-dimensional space, and analyze the result last. For this goal, we calculate the distance between the high-dimensional facial expression frame data of existing. And we distribute it in two-dimensional plane space to maintain the distance relationship between the high-dimensional facial expression frame data of existing like that from the condition which applies linear and nonlinear projection techniques. When comparing the facial expression data which distribute in two-dimensional space and the data of existing, we find out the projection technique to maintain the relationship of distance between the frame data like that in condition of optimum. Finally, this paper compare linear and nonlinear projection techniques to projection high-dimensional facial expression data in low-dimensional space and analyze it. And we find out the projection technique of optimum from it.

• Bulletin of the Korean Mathematical Society
• /
• v.33 no.1
• /
• pp.65-73
• /
• 1996

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.6
• /
• pp.17-30
• /
• 1999

This paper proposes a new stereophonic acoustic echo canceller to prevent impairments on the voice quality and to remove acoustic echo effectively appearing in stereo environment at the instant of abrupt change of the transmission room environment in teleconferencing system. In stereophonic acoustic echo canceller, the major defective problems are the large computational complexity of estimating echo path systems due to the long impulse response of the true echo paths and the performance degradation of echo canceller due to large correlation between dual stereo signals. Moreover, the change of the suboptimal solution for the echo canceller was considered as a critical deficient factor on to the performance of stereophonic echo canceller. To overcome these problems, this paper proposes pseudo stereophonic acoustic echo canceller using Hyper-plane projection algorithm, which shows the robustness to the environment change of the transmission room and the efficiency of computational complexity.

• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.316-324
• /
• 2007

Maximum Intensity Projection (MIP) identifies patients' anatomical structures from MR or CT data sets. Recently, it becomes possible to generate MIP images with interactive speed by exploiting Graphics Processing Unit (GPU) even in large volume data sets. Generally, volume boundary plane is obliquely crossed with view-aligned texture plane in hardware-texture based volume rendering. Since the ray sampling distance is not increased at volume boundary in volume rendering, the aliasing problem occurs due to data loss. In this paper, we propose an efficient method to overcome this problem by Re-rendering volume boundary planes. Our method improves image quality to make dense distances between samples near volume boundary which is a high frequency area. Since it is only 6 clipping planes are additionally needed for Re-rendering, high quality rendering can be performed without sacrificing computational efficiency. Furthermore, our method couldbe applied to Minimum Intensity Projection (MinIP) volume rendering.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2533-2540
• /
• 2009

Performance of processing protocols is one most important goal in a network or systems constituting the network. Measurement of performance, thus, is an essential element to not only establish the network but also develop systems. A projection in vector mathematics is the transformation of points and lines in one plane onto another plane by connecting corresponding points on the two planes with parallel lines. This is a method, as an application of vector mathematics, which is widely used in engineering as well to consider elements dedicated to the measurement object. This paper proposes a sound methodology for measuring the performance of the SIP protocol, which is based on the projection. The SIP protocol is a typical standard protocol for call-processing in the internet telephony of Next Generation Convergence Network. Owing to use the projected protocol which excludes unnecessary operation paths, the methodology can be effective in implementation and resource utilization. This paper also presents a process based on the proposed methodology to measure the performance of a SIP proxy server.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.108-113
• /
• 2011

The electron spin resonance lineshape (ESRLS) function for the electron spin resonance linewidth (ESRLW) of $Cr^{3+}$ (S = 3/2) in ferroelectric lithium niobate single crystals doped with 0.05 wt% of Cr, is obtained by using the projection operator technique (POT), developed by Argyres and Sigel. The ESRLS function is calculated to be axially symmetric about the c - axis and analyzed by using the spin Hamiltonian $H_{SP}={\mu}_B(B{\cdot}{^\leftrightarrow_{g}}{\cdot}S)+S{\cdot}{^\leftrightarrow_{D}}{\cdot}S$ with the parameters g = 1.972 and D = $0.395\;cm^{-1}$. In the ca plane, the linewidths show a strong angular dependence, whereas in the ab plane, they are independent of the angle. This result implies that the resonance center has an axial symmetry along the c - axis. Further, from the temperature dependence of the linewidths that is shown, it can be seen that the linewidths increase as the temperature increases, at a frequency of v = 9.27GHz. This result implies that the scattering effect increases with increasing temperature. Thus, the POT is considered to be more convenient to explain the scattering mechanism as in the case of other optical resonant systems.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.181-193
• /
• 2010

The paper presents an alternative way to classical stereocorrelation. First, 2D image processing of random patterns is described. Sub-pixel displacements are determined using phase analysis. Then distortion evaluation is presented. The distortion is identified without any assumption on the lens model because of the use of a grid technique approach. Last, shape measurement and shape variation is caught by fringe projection. Analysis is based on two pin-hole assumptions for the video-projector and the camera. Then, fringe projection is coupled to in-plane displacement to give rise to 3D measurement set-up. Metrological characterization shows a resolution comparable to classical (stereo) correlation technique ($1/100^{th}$ pixel). Spatial resolution seems to be an advantage of the method, because of the use of temporal phase stepping (shape measurement, 1 pixel) and windowed Fourier transform (in plane displacements measurement, 9 pixels). Two examples are given. First one is the study of skin properties; second one is a study on leather fabric. In both cases, results are convincing, and have been exploited to give mechanical interpretation.