• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.195-199
• /
• 2008

We present an approach to detect real plane for line base recognition and pose estimation Given 3D line segments, we set up reference plane for each line pair and measure the normal distance from the end point to the reference plane. And then, normal distances are measured between remains of line endpoints and reference plane to decide whether these lines are coplanar with respect to the reference plane. After we conduct this coplanarity test, we initiate visibility test using z-buffer value to prune out ambiguous planes from reference planes. We applied this algorithm to real images, and the results are found useful for evidence fusion and probabilistic verification to assist the line based recognition as well as 3D pose estimation.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.28-35
• /
• 2003

Fatigue tests of transverse fillet weldment were performed under out-of-plane bending loads. Significant increase of the fatigue strength was observed under out-of-plane bending loads, compared to the one under in-plane loads (axial loads). Applicability of the crack propagation analysis using LEFM for the surface crack of fillet weldment were investigated as well, in parallel with the fatigue tests. For the rational assessment of the fatigue strength of welded ship structures where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to complexity of applied load and structural geometry, further investigation is recommended for the effect of the out-of-plane bending stress on the fatigue strength of weldment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.164-168
• /
• 2004

The vibration analysis of an axially moving membrane are investigated when the membrane has the two sets of in-plane boundary conditions, which are free and fixed constraints in the lateral direction. Since the in-plane stiffness is much higher than the out-of-plane stiffness, it is assumed during deriving the equations of motion that the in-plane motion is in a steady state. Under this assumption. the equation of out-of\ulcornerplane motion is derived, which is a linear partial differential equation influenced by the in-plane stress distributions. After discretizing the equation by using the Galerkin method, the natural frequencies and mode shapes are computed. In particular, we put a focus on analyzing the effects of the in-plane boundary conditions on the natural frequencies and mode shapes of the moving membrane.

• 오토저널
• /
• 제15권2호
• /
• pp.121-129
• /
• 1993

Plane strain punch stretching test (PSST) was developed to evaluate stamping formability of sheet materials. In this test, the rectangular specimen of sheet material is uniformly stretched up to fracture by raising a specially designed punch to certainly assure plane strain stretching deformation along the longitudinal direction of the specimen. The stamping formability was evaluated by limit punch height(LPH) in plane strain punch stretching test compared to limit dome height(LDH) in hemispherical punch stretching test. LPH-value in PSST well ranks the stamping formability of various material and correlates with press performance. Moreover by using ultrasonic thickness gauge the plane strain intercept-limit plane strain(FLCo)-in forming limit curve can be accurately determined from thickness measurement around the fracture area. The FLCo derived from thickness measurement well correlates with the results from circle grid analysis for the deformed circle grid marked on the surface of the specimen.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.80-86
• /
• 1995

A method of eliminating the branch problem in driving crank center point plane for 3 position synthesis of 4 bar mechanism is introduced. By studying various transformation characteristics from the circle point plane into the center poi t plane, the curves in the center point plane transformed from the filemon line in circle point plane are analytically obtained, which will seperate the whole center point plane into many sub-areas for the selec- tion of the center point of the driving crank. And a simple method to identify which of the sub-areas will cause the branch problem is also presented. The method will allow the selection of the center point of driving crank without the branch problem.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권3호
• /
• pp.229-237
• /
• 2000

According to the functional matrix theory, Delaire proposes that individual occlusal plane was determined by variable effects of teeth, maxilla, mandible, cranium, cranial base and soft tissue matrix including the orofacial musculature. and that there is the ideal occlusal plane determined by the most proper spatial position of maxilla and mandible, functionally and esthetically. This study was designed to find out the relation between Delaire's ideal occlusal plane and muscle activity of masticatory muscles in individuals who have normal maxillo-mandibular relationships. Lateral cephalometric radiographs were taken and his/her individual occlusal plane and ideal occlusal plane were analyzed with Delaire's architectural and structural craniofacial analytic method. For evaluation of muscle activities of masticatory muscles, electromyography of anterior temporal muscle, superficial masseter muscle, and anterior belly of digastric muscle was recorded in fifty Korean normal Angle class I occlusion individuals. According to the average value of ideal occlusal plane, fifty normal Angle class I occlusion individuals were classified into three groups: Ideal occlusal plane group(I group), hyperrotation group(I+ group) and hyporotation group(I- group). The result of this study was as follows: 1. The results of Delaire's architectural and structural craniofacial analysis of lateral cephalography of the fifty Korean normal Angle class I occlusion individuals are that twelve persons(24%) have consistent or parallel with ideal occlusal plane and the average of angular difference was $1.22^{\circ}{\pm}3.69^{\circ}$. 2. There is no significant difference in muscle activities of masticatory muscles during resting(p<0.05), but significant increases of muscle activity of ipsilateral anterior temporal and masseter muscle, contralateral anterior belly of digastric muscle during unilateral chewing and of anterior temporal and masseter muscle during bilateral clenching(p<0.05). 3. To find out the effect of the angular difference between Delaire's ideal occlusal plane and real occlusal plane to muscle activity, muscle activities of masticatory muscles were compared with three groups in each other; I group, I+ group and I- group. The results were no significant differences during resting, unilateral chewing and bilateral clenching.(p>0.05) 4. Although there is no significant differences of masticatory muscle activities among the three groups, the fact that increasing tendency of masseter muscle activity of ideal occlusal plane group(I+) than those of any other groups(I+ and I-) during bilateral clenching was noted. There is only the implication that occlusal plane makes some effects on masticatory muscle activities, espacially that of masseter muscle during bilateral clenching. In conclusion, the hypothesis that occlusal plane is one of the factors which affect the muscle activities of masticatory muscles and that anyone whose occlusal plane consistent with Delaire's ideal occlusal plane has an extraordinary functional advantage in masticatory muscle function cannot be proven with electromyography methods.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.259-269
• /
• 2013

본 논문에서는 다양한 기판 집적 도파관 전송선 두께를 가지는 시스템에 적용을 위해서 천공된 기판 집적 도파관 다단 E-plane 변환기를 제안한다. 본 제안 구조는 ${\lambda}_g/4$ 임피던스 변환기 원리를 적용하여 ${\lambda}_g/4$ 길이 내에 천공을 삽입한다. 천공된 기판 집적 도파관은 도파관 내부의 낮아진 capacitance를 통해 특성 임피던스가 증가되어 E-plane 변환기로 구현된다. 또한, 체비셰프 다항식을 적용하여 구현한 천공된 기판 집적 도파관 다단 E-plane 변환기는 대역폭을 개선하였다. 천공된 기판 집적 도파관 2단 E-plane 변환기는 11.45~13.6 GHz의 주파수 대역에서 삽입 손실 $1.57{\pm}0.11$ dB, 입력 반사 손실은 15 dB 이상으로 나타났다.

• 디지털융복합연구
• /
• 제12권12호
• /
• pp.441-447
• /
• 2014

본 연구는 대기업에 근무하는 산업체 근로자를 대상으로 비만도에 따른 척추안정화근력의 차이를 분석하는데 목적을 두었다. 편의표본 추출방법(Convenience Sampling Method)에 의하여 50명을 표본을 추출하여, 체질량지수(BMI) $25kg/m^2$ 이상을 비만군(25명), 이하를 정상군(25명)으로 분류하여 독립표본 t검정(Independent t-test)으로 분석하였다. 집단간 척추안정화근력의 측정결과 정상군의 평균이 비만군에 비해 모두 높았으며, Sagittal Plane에서는 $0^{\circ}$ Forward에서 유의한 차이를 보였고, Coronal plane에서는 $90^{\circ}$ Left, $90^{\circ}$ Right에서 유의한 차이를 보였으며, Diagonal Plane에서는 $45^{\circ}$ Left Tilt, $45^{\circ}$ Right Tilt에 유의한 차이를 보였다. BMI 분류에 따른 근육량과 골격근량의 분석결과에서는 비만군이 정상군에 비해 모두 높았으며 통계적으로 유의한 차이를 보였다. 비만군이 정상군에 비해 근육량은 많지만 척추안정화근력은 약하다는 것을 감안하여 Sagittal Plane, Coronal plane, Diagonal Plane에서의 비만인을 위한 척추안정화 강화 프로그램의 개발이 요구된다.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.250-256
• /
• 2017

A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.107-113
• /
• 2008

본 논문에서는 차단 영역 도파로로 구현된 협소한 형태의 H-plane slot을 이용하여 다수의 감쇄극을 가지는 반파장 partial H-plane filter를 제안하였다. 협소한 형태의 H-plane slot은 대역 통과 필터의 어드미턴스 인버터 역할을 하는 동시에 특정 주파수에서 공진을 발생시킨다. 따라서 제안된 필터는 어떠한 부가적인 coupling이나 추가적인 구조의 변형 없이 저지 대역에서 감쇄극을 가지는 간단한 구조로 구현되고, 감쇄극 수는 인가되는 slot의 수만큼 발생된다. 제안된 필터는 일반적인 도파로의 1/4의 단면적을 가지는 partial H-plane waveguide로 설계되므로 소형화에 유리하다 저지 대역에서 각각 4개와 5개의 감쇄극을 갖는 3단과 4단 반파장 대역 통과 필터를 H-band에서 설계하여, 이론적 주파수 응답 특성이 실험적 응답 특성과 잘 일치함을 확인하였다.