• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.127-137
• /
• 2019

Nail art, which has been popularized recently, has increased convenience in the direction of nail art design harmonized with clothing and the increased interest and usage of nail art decoration. This study set out to propose practical planar and three-dimensional nail art designs in harmony with modern clothes by applying trimmings common in 18th century women's clothing, which used a variety of attachable decorations. As for the methodology, the investigator examined theories in previous studies, literature, and analyzed the types of trimming in female portraits from the 18th century at the museum at the Palace of Versailles in France. Planar and three-dimensional nail art designs were created for each of the top three trimming types- braids, laces, and ribbons, which were identified through analysis. The study applied the trimmings of the 18th century women's clothes to nail art design and had the following results: First, the top three trimming types were identified based on the analysis of the 18th century portraits. They were then used as motifs in the production of planar and three-dimensional nail art designs. The results show that the motifs of the clothes trimmings were fit for and had practical possibilities for expression in nail art designs. Secondly, diversity and the expansion of ideas in the study of nail art design were promoted. In addition, elements were increased to have mutually complementary effects with clothes. Finally, the study made various attempts at nail design methods by adopting a range of nail art expression techniques including hand painting, 2D & 3D art techniques, and using planar and three-dimensional nail decorations, thus proposing a positive direction for the organization of a curriculum to make use of 18th century women's clothing motifs in nail art education.

• The Korean Journal of Nuclear Medicine
• /
• v.25 no.1
• /
• pp.61-67
• /
• 1991

The usefulness of $^{99m}Tc-labeled$ RBC single photon emission CT (SPECT) scanning in the diagnosis of hepatic heminagiomas was evaluated in 22 patients with various focal hepatic lesions including 15 cases of hemangiomas, 3 cases each of hepatomas and metastasis and 1 case of abscess. The diagnoses were based on ultrasonography and/or CT scanning, clinical stability of lesion for at least 6 months or surgical exploration. Seven cases of 15 hemangiomas were detected by delayed planar RBC scanning, whereas 4 cases were detected by delayed RBC-SPECT scanning. The smallest hemangioma shown by delayed RBC-SPECT scanning was 1.0 cm in diameter. compared with 2.2 cm by planar RBC scanning. One small hemangioma (2.0 cm) located adjacent to the heart was not found by either method. The sensitivities in detecting the hemangioma according to the site by planar imaging were 16.6% $(1.0\sim1.9cm)$, 66.7% $(2.0\sim2.9cm)$ and 83.3% (more than 3.0 cm) and by SPECT were 50.0%, 66.7% and 100%, respectively. Seven cases of non-hemangiomatous lesions did not show any significant increase in activity in the delayed blood pool images. It is concluded that $^{99m}Tc-RBC$ blood-pool SPECT scanning is clearly more sensitive in detecting small hemangioma than planar scanning and is, therefore, a choice of method for the detection of hepatic hemangioma.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.409-417
• /
• 1999

Talairach atlas consists of three orthogonal sets of coronal, sagittal, and axial slices. This atlas has recently an important role as a standard brain atlas in diagnosing disease related with brain function and analyzing cause of brain disease. The 3D digital volume data set reconstructed from the atlas is widely applied to visualization and quantitative analysis of results processed in the digital computer. This paper represented application method of bi-linear interpolation technique, proposed tri-planar interpolation algorithm for 3D volume data reconstruction of Talairach atlas. And we implemented Talairach atlas editor and discussed problems in volume reconstruction of Talairach atlas. The bi-linear method was applied to only one set of the slices and considered the on intensity value in the interpolation process. The tri-planar technique concurrently uses three orthogonal sets of slices with the same information of brain structures. Talairach atlas editor visualized three sets. of atlas slices on the same coordinate and had editing function. Using the atlas editor, we represented problems in volume reconstruction by showing inconsistency of brain structures among three sets of atlas slices.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.36-40
• /
• 2016

Connectors transmit electric signals to different parts in compact mobile display products. As products that apply this have become lightweight and smaller in size, there are growing demands for smaller and more integrated connectors, which are internal parts of the products. As a measure to address these demands, there is the planar array connector that minimizes the part by arranging the single-direction BTB connectors to two directions. As connectors become smaller in size and more highly integrated, maintaining intensity to prevent defects during impact and maintaining adhesive force to smoothly transmit electric signals are growing in importance. Thus, in order to identify the impact of concave shaping on improving adhesive power in connector terminal pins as a method to increase the connecting power of planar array connector terminal pins, this study predicted and examined the concave shaping method, number of concave shapes, and the adhesive power according to the size of the concave shape through CAE. For concave shaping, the model that added concave shaping towards the lower part of the connector terminal pin and added spokes for the area pressed down by the concave shaping was 0.74 N, showing increased adhesive force compared to existing models. Furthermore, when applying two concave shaping, rather than just one, there was a tendency for adhesive force to increase. In the case of adhesive power trends according to the size of the concave shaping, adhesive power increased and the width of the concave shape decreased, and the biggest adhesive force trends were shown when the concave shaping depth was 0.01mm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.515-519
• /
• 2015

In this paper, we suggested the novel monopole antenna for dual band characteristics by a linear monopole antenna combined with crossed planar monopole antenna. The target frequency is ISM(Industrial Scientific Medical) 2.45GHz/5.8GHz. The distinctive features of the proposed antenna in this paper is based on the slit in the surface of a crossed planar monopole for the dual band characteristics and the omnidirectional radiation patterns. The compact size of the proposed antenna is $36mm{\times}5.4mm{\times}5.4mm$. According to the simulation results, the bandwidth, the reflection coefficients below -10dB, of 2.45GHz and 5.8GHz are 150MHz and 1.43GHz, respectively. Consequently the proposed antenna structures is apply to the antenna for dual band characteristics.

• Structural Engineering and Mechanics
• /
• v.74 no.1
• /
• pp.1-18
• /
• 2020

For the large deformation of shear walls under vertical and horizontal loads, there are difficulties in obtaining accurate simulation results using the response analysis method, even with fine mesh elements. Furthermore, concrete material nonlinearity, stiffness degradation, concrete cracking and crushing, and steel bar damage may occur during the large deformation of reinforced concrete (RC) shear walls. Matrix operations that are involved in nonlinear analysis using the traditional finite-element method (FEM) may also result in flaws, and may thus lead to serious errors. To solve these problems, a planar four-node element was developed based on vector mechanics. Owing to particle-based formulation along the path element, the method does not require repeated constructions of a global stiffness matrix for the nonlinear behavior of the structure. The nonlinear concrete constitutive model and bilinear steel material model are integrated with the developed element, to ensure that large deformation and damage behavior can be addressed. For verification, simulation analyses were performed to obtain experimental results on an RC shear wall subjected to a monotonically increasing lateral load with a constant vertical load. To appropriately evaluate the parameters, investigations were conducted on the loading speed, meshing dimension, and the damping factor, because vector mechanics is based on the equation of motion. The static problem was then verified to obtain a stable solution by employing a balanced equation of motion. Using the parameters obtained, the simulated pushover response, including the bearing capacity, deformation ability, curvature development, and energy dissipation, were found to be in accordance with the experimental observation. This study demonstrated the potential of the developed planar element for simulating the entire process of large deformation and damage behavior in RC shear walls.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.73-78
• /
• 2007

In this paper, the CPW-fed triple-band internal planar monopole antenna which simultaneously meets the three bands such as Cellular, PCS and Wibro is designed. The size of the radiation elements can be reduced to about $\lambda/4$ by designing the CPW-fed monopole antenna and then we can miniaturize the antenna size by meandering the radiation elements. In addition, we design the planar antenna for the slim-type mobile phone. We can obtain the desired antenna properties by controlling the length of each radiation elements. The measured return loss of the antenna is less than -7 dB at the desired bandwidth. And the measured radiation patterns are similar to that of the monopole antenna. The designed antenna has the gains -5.2 dBi. -2 dBi, -0.4 dBi at each resonant frequencies respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.60-66
• /
• 2008

In this paper, the CPW-fed Ultra-wideband antenna is designed and fabricated for UWB communications. To achieve ultra-wide bandwidth of the antenna, we propose the mutual coupling of two planar monopole antennas. The mutual coupling of monopole pair of the proposed antenna is optimized by adjusting the parameters, the widths of the planar monopoles and the space between two monopoles. Two UWB antennas with different horizontal sections of the CPW-fed monopole antenna are fabricated and measured to examine the mutual coupling effects on the monopole pair antenna. The measured result show that two antennas are satisfied with UWB communication band(3.1$\sim$10.6Ghz).

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.418-424
• /
• 1984

Rate constants for the hydrolysis of cinnamonitrile in the concentration range of 1 ∼ 5M of perchloric acid at 25$^{\circ}$C have been determined by UV spectrophotometry and from the Bunnett equations, hydration parameters (${\omega}$ = 9.8, ${\omega}^*$ = 0.42 & ${\phi}$=1.6) were obtained. CNDO/2 MO calculations were performed to determine relative stability, net charges, and overlap population of various conformational isomers. The results show that the (E)-planar is more stable than the (Z)-planar and protonation is favored on the nitrogen atom. On the basis of above findings, the acid hydrolysis is initiated by the protonation of the nitrogen atom of cinnamonitrile and then water molecule acting as nucleophile and as a proton transfer agent in the rate determining step. In the transition state of the acid hydrolysis, nucleophilic addition of water molecule occurs by sigma approach to the positively charged $C_7({\alpha}$) atom of the conjugate acid. As the results, we may conclude that the hydrolysis of cinnamonitrile in the strong acidic media proceeds through the A-2 type mechanism.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.1-6
• /
• 2007

This paper presents an equal 3-way planar-type power divider. In conventional 3-way Wilkinson dividers, it has been difficult to realize the circuit because of the crossover of isolation resistors. In the proposed divider, the isolation resistors can be easily attached to the planar structure of the divider. In addition, no phase difference is observed at output ports without extra line compensation because of its symmetric structure. The fabricated 3-way divider has a greatly improved bandwidth by 160 % in $S_{11}$, 22.4 dB, min of isolation, and in phase characteristics between output ports at 2.4 GHz of center frequency from measurement.