• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.185-189
• /
• 2007

A novel technology for CWDM (Coarse Wavelength Division Multiplexer) utilizing a PLC (Planar Lightwave Circuit)-AWG (Arrayed Waveguide Grating) fabrication process is proposed. BPM (Beam Propagation Method) Simulation results on the employed parabolic-horn-type input slab waveguide of AWG and the performance of the 20 nm-channel spacing CWDM with flattened passband are presented. Waveguides of $0.75{\triangle}%$ have been used in this experiment and the insertion loss at the peak wavelength is 3.5 dB for a Gaussian spectrum and is 4.8 dB for a flat-top spectrum. The bandwidth at 3 dB is better than 10 nm and 13 nm for Gaussian and flat-top spectra, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.45-52
• /
• 2000

We present a novel method for simple and efficient analysis of the rectangular MQW waveguide. Preferentially two-dimensional structure is transformed into one-dimensional structure by using the effective index method. Then, the characteristic matrix of the resultant planar MQW waveguide is analyzed by scanning angle method. The effective index, modal intensity, and optical confinement factor of rectangular MQW waveguide can be effectively obtained by this method. Our simulation results show excellent agreement with the accurate solutions based on the finite element method. We also introduce the approximation methods for the analysis of rectangular MQW waveguide and investigate their validity. By using perturbation approach, modal power loss of guided wave in rectangular MQW waveguide is newly investigated and compared with the conventional method using the approximation of planar MQW waveguide.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.105-109
• /
• 1987

A solution which combines ray and aperture integration(AI) techniques is presented for the problem of electromagnetic plane wave scattering by an open-ended, perfectly-conducting, semi-infinite parallel plate waveguide with a thin, uniform layer of lossy or absorbing material on its inner walls, and with a simple planar termination inside. Numerical results are given for the fields outside the waveguide.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.3
• /
• pp.101-109
• /
• 2012

Because the installation problem of parabola antenna that is tilted to 45 degree when this antenna is installed at the area of middle latitude, the study on planar antenna in place of parabola antenna is made rapid progess. Especially, The development of the planar antenna for VSAT is needed depending on the increased Ka-band satellite communications. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. Especially, for the lower sidelobe level, the design method of the radiation power distribution control using the different slot widths is proposed. An array antenna consisting of 32 leakywave waveguide antennas is showing 35.16 dBi of gain, 2.5 degree of beamwidth at azimuth, below than -30 dB of sidelobe level, 45.8 degree of beam tilt angle in center frequency 30.2 GHz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.19-24
• /
• 1992

In this paper, a high frequency method is developed which combines the uniform Geometrical Theory of Diffraction(GTD) and the Aperture Integration(AI) to analyze electromagnetic plane wave scattering by a perfectly-conducting, open-ended, semi-infinite parallel plate waveguide with a uniform layer of absorbing material on its inner wall, and with a slanted planar termination inside. In this method, first, the field of an arbitary point inside the paraller plate waveguide is computed by the GTD. Second, the field scattered into exterior region by the waveguide is found using the equivalent current, which can be obtaind from the aperture field of the waveguide and using the AI. Numerical results based on this GTD method are presented and compared with those based on the mode matching method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.390-390
• /
• 2008

In this paper, we have designed and fabricated optical waveguides based on the Mach-Zehnder Interferometer (MZI) for application to sensor. The evanecent-wave sensor based on the MZI principle has sufficiently high sensitivity to measure the change of the refractive index on surface of a waveguide. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of MZI optical waveguides was performed by a conventional Planar Lightwave Circuit (PLC) fabrication process. The fabricated MZI optical waveguide device was measured. According to the measurement result, the insertion loss of MZI optical waveguide device was below 3.5 dB and the polarization dependent loss (PDL) was within 0.1dB. In addition, we analyzed optical properties of MZI sensor according to the refractive index change of the sensor arm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.7
• /
• pp.72-76
• /
• 2008

In this paper, the several printed square loop antennas which modified monopole antennas are proposed. The proposed antennas are reduced about 20% physical size of antenna and miniaturized reactance value of impedance due to fold center part of the loop. They obtained omni-directional radiation patterns with broad bandwidth and feed method used coplanar waveguide to composed single planar. The proposed antenna bandwidth is about 900MHz($2.63{\sim}3.56GHz]$) resonance frequency on $VSWR{\le}2$. it can be sufficiency of S-DMB band.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.156-161
• /
• 1998

We developed aerosol flame deposition method and made stress-free Pyrex-based optical waveguide on silicon substrate using this method. Zr is doped to control the refractive index of Pyrex waveguide layers. The refractive index of the film changes from 1.460 to 1.475 as the content of Zr changes from 0 to 3 wt%. Er is doped to see the possibility of applying this Pyrex waveguide as PLC-type (Planar Lightwave Circuit) optical amplifier. The refractive index of the film changes from 1.460 to 1.465 as the content of Zr changes from 0 to 1 wt%. Light launching using a prism coupler to the fabricated waveguide showed good quality for application to PLC. The polarization dependence of refractive-index of the Pyrex film is measured to be less than $2{\times}10^{-4}$.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.130-134
• /
• 2016

The influence of Au/Ni-based contact formed on a lightly-doped (7.3×1017cm−3, Zn-doped) InGaAsP layer for electrical compensation of surface plasmon polariton (SPP) propagation under various rapid thermal annealing (RTA) conditions has been studied. The active control of SPP propagation is realized by electrically pumping the InGaAsP multiple quantum wells (MQWs) beneath the metal planar waveguide. The metal planar film acts as the electric contact layer and SPP waveguide, simultaneously. The RTA process can lower the metal-semiconductor electric contact resistance. Nevertheless, it inevitably increases the contact interface morphological roughness, which is detrimental to SPP propagation. Based on this dilemma, in this work we focus on studying the influence of RTA conditions on electrical control of SPPs. The experimental results indicate that there is obvious degradation of electrical pumping compensation for SPP propagation loss in the devices annealed at 400℃ compared to those with no annealing treatment. With increasing annealing duration time, more significant degradation of the active performance is observed even under sufficient current injection. When the annealing temperature is set at 400℃ and the duration time approaches 60s, the SPP propagation is nearly no longer supported as the waveguide surface morphology is severely changed. It seems that eutectic mixture stemming from the RTA process significantly increases the metal film roughness and interferes with the SPP signal propagation.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.946-949
• /
• 2012

We present the optimization of a birefringence-enhanced-waveguide (BWG)-based polarization beam splitter (PBS) in a Mach-Zehnder interferometer (MZI) configuration and analyze the structure-dependent or polarization-dependent phase difference, using a delay-line MZI (DL-MZI). We fabricate the DL-MZI using silica-based planar lightwave circuit technology and, using the DL-MZI, demonstrate the ability to optimize a PBS by measuring the birefringence of the BWG and structure-dependent phase offset.