• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.309-319
• /
• 2001

This paper demonstrates the development of optical temperature sensor based on the etched silica-based planar waveguide Bragg grating. Topics include design and fabrication of the etched planar waveguide Bragg grating optical temperature sensor. The typical bandwidth and reflectivity of the surface etched grating has been ∼0.2nm and ∼9%, respectively, at a wavelength of ∼1552nm. The temperature-induced wavelength change is found to be slightly non-linear over ∼200$^{\circ}C$ temperature range. Typically, the temperature-induced fractional Bragg wavelength shift measured in this experiment is 0.0132nm/$^{\circ}C$ with linear curve fit. Theoretical models with nonlinear temperature effect for the grating response based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• 한국광학회지
• /
• 제16권2호
• /
• pp.138-142
• /
• 2005

본 논문에서는 하나의 얇은 반파장판(half-wave plate)을 이용하여 광섬유-평면도파로 결합기(fiber-to-planar waveguide coupler)의 편광 의존성을 줄이기 위한 방법이 제안되었고 실험적으로 검증되었다. 소자의 편광의존성 제거 원리를 설명하였고 제조과정을 기술하였다. 실험 결과는 소자의 공진 파장이 입력광의 편광상태에 독립적임을 보였다.

• Current Optics and Photonics
• /
• 제3권2호
• /
• pp.172-176
• /
• 2019

The work reports on the fabrication of an optical planar waveguide in the Nd:CNGG crystal by the 0.4-MeV hydrogen ion implantation with a fluence of $8.0{\times}10^{16}ions/cm^2$. The nuclear energy loss of the implanted hydrogen ions was derived by using SRIM 2013 code. The microscope image of the proton-implanted Nd:CNGG crystal cross section was captured by a metallographic microscope. The transmittance spectra were recorded before and after the ion implantation. The light intensity distribution of the planar waveguide at 632.8 nm was experimentally measured to validate its effect on one dimension confinement. The investigation shows that the proton-implanted Nd:CNGG waveguide is a candidate for an optoelectronic integrated device.

• 한국광학회지
• /
• 제15권2호
• /
• pp.109-113
• /
• 2004

광섬유와 평면도파로 결합기의 소산장 결합을 이용하여 디아릴에텐 유도체 DM-BTE(1,2-bis[2,5-dimethylthio-phen-3-yl]-hexafluorocyclopentene)의 광유도 굴절률 변화(photo-induced refractive index change)에 관하여 그 특성을 평가하였다. DM-BTE가 분산된 평면도 파로는 자외선과 가시광선(λ＞450 nm)의 조사에 의해 광변색 반응이 가역적으로 진행되었으며 굴절률변화에 의한 공명 파장 또한 가역적으로 이동하였다. 광변색 반응이 진행되는 동안 평면도 파로의 결정상태(crystal shape)는 일정한 형태를 유지하였으며, 자외선 조사시간에 대한 소자의 파장응답은 0.057 nm/sec 이었고 포화시간은 60 sec로 나타났으며, 가시광선이 다시 조사될 때의 공명파장의 변화는 0.028 nm/sec 이었고, 복귀시간은 140 sec로 측정되었다.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.128-131
• /
• 2011

After the successful extension of the rotating planar waveguide model to Wave Optics, where a clear identification between the angular velocity of one hypothetical waveguide and the phase differences between two points on the path of one bounded mode was found, an application of the model to explain the interference theory is presented. We demonstrate that, for two bounded modes to create an interference pattern, a constrain to the relative parameters among both is imposed by the fiber optics. This result, not reported in the literature up to date, provides a new horizon to understand the interaction light-light when propagated within optical fibers.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.16-21
• /
• 2005

Photonic crystals, periodic structure with a high refractive index contrast modulation, have recently become very interesting platform for the manipulation of light. The existence of a photonic bandgap, a frequency range in which the propagation of light is prevented in all directions, makes photonic crystal very useful in application where the spatial localization of light is required, for example waveguide, beam splitter, and cavity. However, the fabrication of 3 dimensional photonic crystals is still difficult process. A concept that has recently attracted a lot of attention is a planar photonic crystal based on a dielectric membrane, suspended in the air and perforated with two dimensional lattice of hole. The fabrication of Si master with pillar structure using hot embossing process is investigated for two dimensional, low-index-contrast photonic crystal waveguide. From our research we show that the multiple stamp copy process proved to be feasible and useful.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.443-444
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.343-344
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.221-222
• /
• 2007

The UV laser trimming can be useful to have an accurate performance specification of the passive waveguide devices. In order to measure the change of the refractive index of polymer overclad layer under the irradiation of uv light in a high precision Bragg grating is fabricated on the silica core of planar waveguide and the corresponding transmittance spectrum was analyzed. An effective refractive index change of $4.7x10^{-5}$ was obtained for a straight waveguide when its $60{\mu}m$-thick overclad was irradiated by UV laser pulses of its total fluence 24 $J/cm^2$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.498-501
• /
• 2005

Photonic crystals, periodic structure with a high refractive index contrast modulation, have recently become very interesting platform for manipulation of light. The existence of a photonic bandgap, a frequency range in which propagation of light is prevented in all direction, makes photonic crystal very useful in application where spatial localization of light is required for waveguide, beam splitter, and cavity. But fabrication of 3 dimensional photonic crystal is still difficult process. a concept that has recently attracted a lot of attention is a planar photonic crystal based on a dielectric membrane, suspended in the air, and perforated with 2 dimensional lattice of hole. We show that the polymer slabs suspended in air with triangular lattice of air hole can exhibit the in-plane photonic bandgap for TE-like modes. The fabrication of Si master with pillar structure using hot embossing process was investigated for 2 dimensional low-index-contrast photonic crystal waveguide.