• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1370-1376
• /
• 2009

Reinforcing steel works should be carefully controlled by the construction manager considering the severe fluctuation of the price of reinforcing steel bars and for the safety of structure in building constructions. In particular, preparing rebar placing drawings needs more effort and time than before because of the emergence of higher and more complicated buildings. Moreover, the experience of field engineers or foremen (fabricators or detailers) in preparing placing drawings gives rise to the differences in fabricated bar type and quantity of bars used. To address these problems, this study proposed the support system in preparing placing drawings for reinforcing steel works efficiency. In the near future, if this system can be made available on the web, multiple end-users will be able to share the result; the efficiency of rebar supply chain management will also be improved.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.39-46
• /
• 2009

The erection bar is defined as the assistant bar used to fix the position of the reinforcing steel as the reinforcing steel is placed on site. As the erection bar do not bear the structural load and is not showed in the structural drawings, it is not managed importantly. But as chair bars in mat footing is used in large quantities to support the upper main bars, the detailing standards need to be suggested. and some erection bar is placed by experience of the fabricator and placer. Therefore, in this study, a survey about the erection bars was conducted to the reinforcement detailer, the fabricator and placer of domestic construction industry. 11 placing drawings is analyzed to find out the problems of detailing and the quantities of the erection bars. According to the analysis of the survey, the erection bar details in placing drawings were not standardized, and some erection bars are omitted in placing drawings. The improvement in the erection bar detailing was sought by analyzing the results of the survey.

• 한국건축시공학회지
• /
• 제20권3호
• /
• pp.289-296
• /
• 2020

본 연구는 철근 배근과 관련된 증강현실을 구현할 수 있도록 2D 도면에서 배근 정보를 자동으로 추출하여 3D 배근 모델을 생성하는 방법론을 제시하였다. 사용자가 쉽게 도면정보를 획득할 수 있도록 휴대용 단말기에 내장된 카메라를 이용하여 도면을 촬영한 후 화상 인식(Image Recogni-tion)과 문자 인식(OCR; Optical Character Recognition) 도구를 활용하여 배근 정보를 추출하는 방법을 제시하였다. 또한, 게임 엔진을 활용하여 도면에서 추출된 정보를 입력받아 자동으로 3D 부재를 모델링하고 이를 실제 이미지와 중첩해서 배근 모델을 검토할 수 있는 증강현실 앱을 구현하였다. 기존에 개발된 프로그래밍 도구를 활용하여 제시한 방법론에 적용할 수 있도록 세부 내용을 기술하였으며, 건설현장에서 전형적인 부재를 대상으로 철근 배근 증강현실 모델을 구현한 결과를 검토하였다. 제시된 증강현실 배근 모델 자동 생성 방법론은 배근 교육이나 시공검토에 활용될 수 있을 것으로 기대된다.

• 한국건축시공학회지
• /
• 제10권4호
• /
• pp.123-132
• /
• 2010

Rebar work accounts for approximately 30% of the total construction costs for rebars and concrete. Recently, the high rising prices of rebars have become one of the principle factors of rising construction costs. Therefore, construction companies are putting much effort into loss reduction of rebars. Consequently, in this study, we wished to present loss reduction methods of rebars before the preparation of the placing drawings. To devise such methods, we collected previous case studies and analyzed methods that were applied for loss reduction. As a result of the analysis, we were able to find the following methods for loss reduction of rebars: method of reducing the number of splices at the mat foundation, method of reducing splice length at the internal columns or walls of the underground parking lot, method of reducing cap-ties of internal beams of basement floors excluding perimeter beams, and method of reducing anchorage length at the internal column or wall of the underground parking lot. Based on those analysis results, we presented our own loss reduction methods of rebars. Applying our methods resulted in considerable loss reduction.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.83-90
• /
• 2008

The reinforcing steel process is composed of the development of placing drawing, cutting and bending, and the placement and fabrication of the reinforcement, and is participated in by reinforcement detailer, the fabricator and placer. Because the reinforcing steel process-from estimating and rebar detailing, to production, material tracking, billing, and general accounting-is conducted by many participant, reinforcement details based on building code and reinforcing bar detailing standards are essential. The process, however, holds some problems. Building code has been revised recently, and the utilization of placing drawings was proved to be low, and the reinforcement estimating in early stage of the process is below what is required for placement. Therefore, in this study, a survey was conducted to the reinforcement detailer, the fabricator and placer of domestic construction industry. According to the analysis of the survey, the reinforcement details on site was not standardized. The improvement in reinforcing steel detailing standards was sought by analyzing the results of the survey including reinforcement constructability.

• 한국건축시공학회지
• /
• 제18권5호
• /
• pp.471-477
• /
• 2018

본 연구는 최근 건설분야에서 활용도가 높아지고 있는 증강현실 도구를 활용하여 학생들이 철근공사 배근작업을 학습할 수 있는 교육지원 컨텐츠를 개발하고 적용효과를 분석하였다. 구조도면에 대한 이해도를 높이기 위해 구조도면을 마커 이미지로 활용하였으며, 구조도면에 따라 배근된 가상의 3D 배근 모델을 화면에 겹쳐 표현하는 방식으로 증강현실을 구현하였다. 또한 3D 배근 모델과 함께 2D도면의 독도법, 이음 정착길이 기준, 부재별 구조설계기준에 따른 배근방법, 그리고 실제 배근하는 순서 등을 학습할 수 있도록 컨텐츠를 구성하였다. 적용결과 인터페이스 스타일, 지각된 유용성, 지각된 활용의 용이성, 지각된 즐거움, 활용 태도, 활용 의도 측면에서 긍정적으로 평가되었으며, 증강현실은 교육적 측면에서 시각화와 상호작용의 장점이 있기 때문에 활용가치가 높을 것으로 판단된다.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.63-70
• /
• 2008

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results with work zone information.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.358-363
• /
• 2007

철근콘크리트 구조물 형태의 건설공사에 있어 철근공사는 구조적인 측면이나 공사비 비중으로 볼 때 매우 중요한 부분을 차지한다. 철근물량의 정확한 산출은 이러한 철근공사의 효과적인 관리를 위한 기본적인 업무로 볼 수 있으나, 기술의 발전이나 개선 노력에도 불구하고 여전히 철근 숙련공의 경험이나 인력에 의존하는 전 근대적인 방식에서 벗어나지 못하는 실정이다. 따라서 본 연구는 철근 물량을 부재별/배근별로 보다 신속하고 정확하게 산출하기 위한 전산프로그램의 개발을 목적으로 하며, 이를 위해 연결된 부재의 철근 배근 상태를 감안하여 이음길이와 정착 길이, 피복두께등을 고려한 물량산출 알고리즘을 개발하였다. 개발된 프로그램은 전문 인력의 판단이 아닌 논리적인 게산에 의해 신속하게 수량을 산출할 수 있으며, 설계 변경이 잦은 철근공사에 유연하게 대처할 수 있다는 장점을 지니며 물량산출 과정에서 나온 결과 값을 바탕으로 시공 상세도를 자동으로 작성하는 기능을 포함한다.

• 토지주택연구
• /
• 제8권4호
• /
• pp.257-266
• /
• 2017

LH has been using ultra high strength reinforcing bars (SD500 and SD600), since 2011. Such a change requires an adjustment of the old extra rates of bar splice to reflect use of ultra high strength reinforcing bars, as these rates had been set based on SD400 bars. It is particularly difficult to calculate precisely rebar lap-splice locations for large areas, such as those in apartment buildings. This research aims to adjust the extra rates of bar splice to reflect a reasonable rate; the rebar lap-splice length is not an exact estimation, but instead, an extra rates of bar splice is set and the rebar lap-splice length is increased by 2% (D 10) - 7% (025) depending on the bar size. The subjects of this study are LH apartments undergoing frame construction. We studied the quantity estimations from the design drawings, and analyzed the settlement quantities of construction field. The results of the study revealed that, when each of the quantities are analyzed, consider adjusting the extra rates of bar splice of some rebar to 1% - 3.5%. This was caused by an overuse of reinforcing bars in onsite construction and the use of supporting bars that have not been reflected in the documents, among other reasons. Based on the results of our study, an improvement plan for the current extra rates of bar splice seems to be necessary, cutting or raising the rate depending on the analysis of the data. Through this study, we expect to contribute to the calculation of reasonable construction costs, improvements in the quality of rebar work, and improvements in the capacity of design techniques for apartment buildings.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.186-191
• /
• 2020

이 논문에서는 차량 운반선에서 선적 계획과 하적 계획에 따른 차량 선적을 효과적으로 진행하기 위하여, 선박 내 데크에 차량을 효율적으로 배치하는 최적화 기법을 제안하였다. 이를 위해, 선박의 공간 정보를 나타내는 XML 데이터의 변환, 병합 및 분할 알고리즘, 유전자 알고리즘을 활용하였으며, 또한 최적화된 차량 배치 결과를 시각화하는 기능까지 구현하였다. 기존의 전형적인 유전자 알고리즘에서 사용되는 선택, 교차, 변이, 엘리트 보존 등의 기법들을 활용하였으며, 특히 차량의 선적을 위한 선박 공간을 병합 및 분할하는 기법을 함께 제안하여 차량 배치 최적화 기법을 제안하였다. 실험 결과, 기존의 유전자 알고리즘만으로 최적화하기 힘든 부분에 제안한 병합 및 분할 기법을 적용하는 것이 최적화 과정에 효과적이었음을 확인할 수 있었다. 또한, 시각화 기법을 통해 차량 배치 결과를 도면 형태로 보여줌으로써 배치 결과의 효율성을 전문가가 쉽게 판단할 수 있도록 하였다.