• Smart Structures and Systems
• /
• v.14 no.1
• /
• pp.55-70
• /
• 2014

The paper presents a multi-objective optimization strategy for a multi-type sensor placement for Structural Health Monitoring (SHM) of long span bridges. The problem is formulated for simultaneous placement of strain sensors and accelerometers (heterogeneous network) based on application demands for SHM system. Modal Identification (MI) and Accurate Mode Shape Expansion (AMSE) were chosen as the application demands for SHM. The optimization problem is solved through the use of integer Genetic Algorithm (GA) to maximize a common metric to ensure adequate MI and AMSE. The performance of the joint optimization problem solved by GA is compared with other established methods for homogenous sensor placement. The results indicate that the use of a multi-type sensor system can improve the quality of SHM. It has also been demonstrated that use of GA improves the overall quality of the sensor placement compared to other methods for optimization of sensor placement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.405-413
• /
• 2006

Purpose : This study was conducted to evaluate the effect of denture placement on nutrition status and quality of life in the urban elderly Material and method : The first survey was conducted from 45 targeted elderly people(25 experimental group, 20 control). In the first survey, information on general characteristics, chewing ability, food intake and nutrient intake, anthropometric measurement, and degree of satisfaction in life were obtained. The second survey was conducted to evaluate the effect of denture placement with same method as the first survey. Results : Before denture placement, there are no statistical significant differences (in general characteristics, chewing ability, nutrient intake, anthropometric measurement, and degree of satisfaction in life) between experimental group and control. But after denture placement, survey shows that there is statistically significant difference in chewing ability between two groups. The experimental group have higher intake of energy, protein, carbohydrate, iron, and vitamin C. in nutrient intake. And after denture replacement, there is significant improvement in degree of satisfaction in life. After denture placement there are significant changes in agitation and attitude toward own aging according to Lawton's factor classification. Conclusion: In short, this study shows that chewing ability improvement of the elderly has strong positive effects to their food intake, nutrient status and quality of life.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.33-39
• /
• 1997

Recently the method of basal compound fertilizer (N : P : K = 18.2 : 9.8 : 35.0) Placement has been changed from banding to broadcasting in tobacco cultivation. The effects of the compound fertilizer placement, level of fertilizer and additional urea application on the agronomic characteristics, two chemical compositions and physical Properties of burley tobacco(Nicotiana tabacum L. cv. KB 108) were investigated at Chonju Experiment Station, Korea Ginseng and Tobacco Research Institute in 1995-1996. Six treatments consisted of (1) band (method of fertilizer Placement) + In kg/10a(compound fertilizer) + 0(additional urea applied), (2) broadcast+140+0, (3) broadcast+140+25, (4) band+180+0, (5) broadcast+180+0, and (6) broadcast +180+25. The additional urea was applied at hilling. No significant differences were detected between banding and broadcasting method of compound fertilizer Placement in field 9rowth, wield, organoleptic qualify(price Per kilogram), chemical composition and Physical properties of cured leaf, The increased compound fertilizer by 30%(40k/10a) or the additional urea application by 25kg per 10a produced slightly higher yield than the recommended amount of basal compound fertilizer without additional urea application did. It also increased the total alkaloid content of cured leaf. It is recommended that no more basal fertilizer above the recommended amount and no additional urea application are needed in burley tobacco fertilization, even though the method of basal fertilizer placement being chanced from banding to broadcasting. Key words : Nicotiana tabacum, fertilizer placement, additional urea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.281-287
• /
• 1991

This study was designed to investigate the influence of the clasp arm length on the change of retentive force with repeated placement or removal. The author measured the retentive force of Akers clasp and I-bar clasp in the depth of undercut 0.5mm, 0.25mm, respectively, varying the length of clasp arm, that is, 10mm, 14mm, 17mm in Akers clasp and 16mm, 18mm, 20mm in I-bar clasp. The retentive force was measured just before the placement of removal, after 100 times repeated placement or removal, after 300 times repeated placement or removal. The obtained results were as follows : 1. The shorter the clasp arm, the greater retention in Akers clasp and I-bar clasp(p<0.05). 2. There was decreased retentive force of Akers clasp and I-bar clasp after 300 times repeated placement or removal(p.<0.005). 3. The decreasing rate of retentive force in Akers clasp with 10mm was higher than that with 17mm, after 300 times repeated placement or removal, but there was no statistica difference(p>0.05).

• Physical Therapy Korea
• /
• v.4 no.1
• /
• pp.30-38
• /
• 1997

The patients with hemiplegia show different body weight distribution as compared to normal subjects. These patients load their body weight more on sound leg than affected leg. The purpose of this study was to examine the effect of foot placement under three conditions: forward, intermediate, and backward placement, on body weight distribution and time needed to rise while assuming sit-to-stand. Fourteen patients with hemiplegia participated in the study. Their body weight distributions during sit-to-stand under the three different conditions were measured by a limb loader and time needed to rise was measured by a stopwatch. The data were analysed by the repeated measure of one-way ANOVA. Statistical Analysis demonstrated that body weight distribution was less asymmetric in backward foot placement. The difference of body weight bearing rate between sound leg and affected leg was significantly decreased as foot placement moved from forward to backward. These results show that backward foot placement during sit-to-stand make patient with henuplegia distribute their body weight more evenly on the lower extremity.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.440-448
• /
• 2019

The Internet of Things (IoT) is one of the main enablers for situation awareness needed in accomplishing smart cities. IoT devices, especially for monitoring purposes, have stringent timing requirements which may not be met by cloud computing. This deficiency of cloud computing can be overcome by fog computing for which fog nodes are placed close to IoT devices. Because of low capabilities of fog nodes compared to cloud data centers, fog nodes may not be deployed with all the services required by IoT devices. Thus, in this article, we focus on the issue of fog service placement and present the recent research trends in this issue. Most of the literature on fog service placement deals with determining an appropriate fog node satisfying the various requirements like delay from the perspective of one or more service requests. In this article, we aim to effectively place fog services in accordance with the pre-obtained service demands, which may have been collected during the prior time interval, instead of on-demand service placement for one or more service requests. The concept of the logical fog network is newly presented for the sake of the scalability of fog service placement in a large-scale smart city. The logical fog network is formed in a tree topology rooted at the cloud data center. Based on the logical fog network, a service placement approach is proposed so that services can be placed on fog nodes in a resource-effective way.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.125-134
• /
• 2022

Recently, there are an increased the number of reports on the misuse or malicious use of an UAS. Thus, many researchers are studying on defense schemes for UAS by developing or improving C-UAS sensor technology. However, the wrong placement of sensors may lead to a defense failure since the proper placement of sensors is critical for UAS defense. In this study, a multi-object optimization model for C-UAS sensor placement in an air base is proposed. To address the issue, we define two objective functions: the intersection ratio of interested area and the minimum detection range and try to find the optimized placement of sensors that maximizes the two functions. C-UAS placement model is designed using a NSGA-II algorithm, and through experiments and analyses the possibility of its optimization is verified.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.3892-3912
• /
• 2021

The recent rapid growth of mobile network traffic places multi-access edge computing in an important position to reduce network load and improve network capacity and service quality. Contrasting with traditional mobile cloud computing, multi-access edge computing includes a base station cooperative cache layer and user cooperative cache layer. Selecting the most appropriate cache content according to actual needs and determining the most appropriate location to optimize the cache performance have emerged as serious issues in multi-access edge computing that must be solved urgently. For this reason, a cache placement algorithm based on comprehensive utility in big data multi-access edge computing (CPBCU) is proposed in this work. Firstly, the cache value generated by cache placement is calculated using the cache capacity, data popularity, and node replacement rate. Secondly, the cache placement problem is then modeled according to the cache value, data object acquisition, and replacement cost. The cache placement model is then transformed into a combinatorial optimization problem and the cache objects are placed on the appropriate data nodes using tabu search algorithm. Finally, to verify the feasibility and effectiveness of the algorithm, a multi-access edge computing experimental environment is built. Experimental results show that CPBCU provides a significant improvement in cache service rate, data response time, and replacement number compared with other cache placement algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.444-448
• /
• 2003

In this paper, the Lagrange dynamics is studied. A state space representation of Lagrange dynamics and control algorithm based on the state feedback pole placement are presented. The state space model presented is descriptor type linear parameter dependent system. It is shown that the control algorithms based on the linear system theory can be applicable to the state space representation of Lagrange dynamics. To show that the linear system theory can be applicable to the state space representation of Lagrange dynamics, the LMI based regional pole-placement design algorithm is developed and present two examples.

• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.551-560
• /
• 2007

Kruskal and Wallis (1952) proposed typical nonparametric method in one-way layout problem. A special feature of this procedure is use of rank in mixed samples. In this paper, the new procedure based on placement as extension of the two sample placement tests described in Orban and Wolfe (1982) was proposed. Some critical values in small sample cases and comparative results of a Monte Carlo power study are presented.