• 제목/요약/키워드: Pivot

검색결과 363건 처리시간 0.024초

기존 RC 기둥 부재의 이력거동 예측을 위한 비선형 해석모델 (Nonlinear Analysis Models to Predict the Hysteretic Behavior of Existing RC Column Members)

  • 최명호;이창환
    • 한국공간구조학회논문집
    • /
    • 제22권4호
    • /
    • pp.89-98
    • /
    • 2022
  • The recent earthquake in Korea caused a lot of damage to reinforced concrete (RC) columns with non-seismic details. The nonlinear analysis enables predicting the hysteresis behavior of RC columns under earthquakes, but the analytical model used for the columns must be accurate and practical. This paper studied the nonlinear analysis models built into a commercial structural analysis program for the existing RC columns. The load-displacement relationships, maximum strength, initial stiffness, and energy dissipation predicted by the three analysis models were compared and analyzed. The results were similar to those tested in the order of the fiber, Pivot, and Takeda models, whereas the fiber model took the most time to build. For columns subjected to axial load, the Pivot model could predict the behavior at a similar level to that of the fiber model. Based on the above, it is expected that the Pivot model can be applied most practically for existing RC columns.

『영추ㆍ경맥편』과 『상한론』의 태음병의 상관성 연구 (Study of Relationship on TaiYin-disease between the Chapter of Channels in Miraculous Pivot of Emperor's Classic of Internal Medicine and in ShangHanRun)

  • 이승렬;김윤태;신흥묵
    • 동의생리병리학회지
    • /
    • 제18권2호
    • /
    • pp.396-400
    • /
    • 2004
  • The oriental medical doctors who had studied Shang Han Run thought highly of meridians and until now it was generally known that the chapter of heat in the Plain Questions of Emperor's Classic Internal Medicine(ECIM: 皇帝內經, 素門, 熱論) was the basis of Shang Han Run. The chapter of heat in the Plain Questions of ECIM was the first text in which the basic theory on six-channels according to the types of illness was introduced. In my point of view, the theory of treating six-channels had close relation to the Chapter of Channels in Miraculous Pivot of ECIM(皇帝內經, 靈樞ㆍ經脈篇) as well as the chapter of heat in the Plain Questions of ECIM. Therefore I took a look at the origin of treating six-channels in Shang Han Lun and illuminated again the meaning to compare the parts of in Shang Han Lun with the Chapter of Channels in Miraculous Pivot of ECIM. Conclusion : The symptoms of TaiYin-channel(太陰經) in the Chapter of Channels in Miraculous Pivot of ECIM were, for the most part, accord with those of TaiYin-disease in Shang Han Lun. Furthermore, the symptoms in Shang Han Lun were explained definitely and in detail. Therefore the theory of Shang Han Lun has been developed on the basis of ECIM with the changes of the times. TaiYin-disease implied symptoms of pi-spleen meridian(脾經) and fei-lung meridian(肺經). Therefore Shang Han Lun was the foundation of treatment based on overall analysis of signs and symptoms(辨證論治) in respect of meridian as well as the text in which the steps of infectious diseases(外感病) of human bodies were explained.

SIMD 기반의 VBP 기법을 적용한 효율적인 퀵정렬의 구현 (An Implementation of Efficient Quicksort Utilizing SIMD-Based VBP Technique)

  • 홍길석;김홍연;강성현;민준기
    • 정보과학회 컴퓨팅의 실제 논문지
    • /
    • 제23권8호
    • /
    • pp.498-503
    • /
    • 2017
  • SIMD(Single Instruction Multiple Data)는 대표적인 병렬화 아키텍처 중 하나로, SIMD 레지스터에 적재된 여러 개의 데이터들을 하나의 명령어로 처리하는 기술이다. 퀵정렬(Quicksort)은 데이터 값들이 리스트로 저장되어 있을 때, 임의의 위치에 있는 데이터 값을 피봇으로 하여 그것보다 작은 값은 왼편으로, 큰 값은 오른편으로 분할하여 생성된 두 개의 서브리스트에 대하여 같은 작업을 반복함으로써 데이터 값들을 정렬하는 정렬 알고리즘이다. 본 연구에서는 SIMD 명령어를 이용하여 파이프라인 아키텍처에서 조건 예측 실패에 따른 성능 저하를 유발하지 않도록 분기 조건을 최소로 사용하는 효율적인 퀵정렬(Quicksort) 알고리즘을 제안한다. 또한, VBP(Vertical Bit Parallel) 기법과 얼리 프루닝(early pruning) 기법을 적용하여 SIMD 레지스터에 데이터를 바이트 단위로 적재함으로써 퀵 정렬 알고리즘의 성능을 향상하였다.

영추(靈樞).골도(骨度)에 대(對)한 연구(硏究) (A study on the Gal Do(骨度) of the Young Chu(靈樞))

  • 두자성;노스텔라;이태호;;금경수;정헌영
    • 대한한의학원전학회지
    • /
    • 제19권3호
    • /
    • pp.305-313
    • /
    • 2006
  • According to the bone-standard measuring, the length between the elbow and the wrist has the span of 1.25 cheoks whereas it has the span of 1.2 cheoks or 1.2 cheoks today, the breadth of the chest has the span of 9.5 chons whereas it has the span of 8 chons today, and the length from celestial pivot to transverse bone has the span of 6.5 chons whereas it has the span of 5 chons, and the length from free rib region to thigh pivot has the span of 6 chons whereas it has the span of 9 chons today. It is said that all of the acupuncture points are correctly prescribed by the bone-standard measuring irrespective of men and women of all ages, fat and lean, and whether large or small in height. This lies at the root of the selecting acupuncture points. The bone standard in Spiritual Pivot and that in common use at present have a little difference and the bone standard of today is based upon A-B Classic. Spiritual Pivot named as Acupuncture Classic was in good preservation until the mid-eleventh century, but the book lost a lot in contents was the incomplete edition. In the 8th year of the king Cheoljong's reign of the North Song Dynasty in 1093, though the nine-volume Spiritual Pivot drafted from the Goryo Dynasty was published, the book was wanting in consistency. While on the other, I think that A-B Classic which has been in a state of perfection had a great influence on the healers of the day.

  • PDF

긍정 데이터 분포를 반영한 다중 인스턴스 지지 벡터 기계 학습 (Learning Multiple Instance Support Vector Machine through Positive Data Distribution)

  • 황중원;박성배;이상조
    • 정보과학회 논문지
    • /
    • 제42권2호
    • /
    • pp.227-234
    • /
    • 2015
  • 본 논문에서는 데이터 분포를 고려한 다중 인스턴스 지지 벡터 기계 학습 알고리즘을 제안한다. 기존의 방법은 긍정 가방 안에서 "가장 긍정"인 인스턴스만 고려하여 마진을 찾는다. 일반적으로 다중 인스턴스로 표현된 데이터에서, 긍정 가방에 포함된 인스턴스들 중 실제로 긍정을 나타내는 인스턴스들은 자질 공간 상에서 서로 유사한 곳에 위치해 있다. 제안한 방법은 기존의 다중 인스턴스 지지 벡터 기계 학습 알고리즘 중에서 긍정 인스턴스들의 교차점을 찾아 이 교차점과 거리를 계산하여 "가장 긍정"인 인스턴스를 선택한다. 긍정 인스턴스들의 교차점인 피벗 포인트를 구하는 방식은 두 가지이다. 먼저, 학습과정 중 추정된 긍정 인스턴스들의 중심점을 사용하는 방법과 학습 시작 시에 가장 긍정일 것으로 예상되는 긍정 인스턴스들의 중심점을 찾는 방법으로 나뉜다. 총 12개의 벤치마크 다중 인스턴스 데이터 셋을 통해 제안한 방법이 기존의 학습 알고리즘에 비해 더 좋은 성능을 보임을 보인다.

로커-백 피벗을 갖는 틸팅 패드 저널 베어링의 회전체동역학적 성능 예측 및 기존 결과와의 비교 (Rotordynamic Performance Predictions of Tilting Pad Journal Bearing with Rocker-Back Pivots and Comparison with Published Test Results)

  • 김태호;최태규;김충현
    • Tribology and Lubricants
    • /
    • 제31권6호
    • /
    • pp.294-301
    • /
    • 2015
  • In this paper, we predict the rotordynamic force coefficients of tilting pad journal bearings (TPJBs) with rocker-back pivots, and we compare the predictions to recently published predictions and test data. The present TPJB model considers the rocker-back pivot stiffness calculated based on the Hertzian contact-stress theory, which is nonlinear with the application of a force . For the five-pad TPJB in load-between-pad and load-on-pad configurations, the predictions show the pressure- and film-thickness distributions, the deflection and stiffness of the individual pivots, and bearing stiffness and damping coefficients. The minimum film thickness and peak pressure occur at the bottom pad on which the applied load is directed. Because of the preload, the pres- sure is positive even at the upper pad in the opposite direction to the applied load. The pivot deflection and stiff- ness are maximum at the bottom pad that receives the heaviest pressure load. The predicted stiffness coefficients increase as the static load and rotor speed increase, while the damping coefficients decrease as the rotor speed increases, but increase as the static load increases. In general, the predicted stiffness coefficients agree well with the test data. The predicted damping coefficients overestimate the test data, particularly for large static loads. In general, the current predictive model considering the pivot stiffness improves the accuracy of the rotordynamic performance compared to previously reported models.

Experimental verification of leverage-type stiffness-controllable tuned mass damper using direct output feedback LQR control with time-delay compensation

  • Chu, Shih-Yu;Yeh, Shih-Wei;Lu, Lyan-Ywan;Peng, Chih-Hua
    • Earthquakes and Structures
    • /
    • 제12권4호
    • /
    • pp.425-436
    • /
    • 2017
  • Vibration control using a tuned mass damper (TMD) is an effective technique that has been verified using analytical methods and experiments. It has been applied in mechanical, automotive, and structural applications. However, the damping of a TMD cannot be adjusted in real time. An excessive mass damper stroke may be introduced when the mass damper is subjected to a seismic excitation whose frequency content is within its operation range. The semi-active tuned mass damper (SATMD) has been proposed to solve this problem. The parameters of an SATMD can be adjusted in real time based on the measured structural responses and an appropriate control law. In this study, a stiffness-controllable TMD, called a leverage-type stiffness-controllable mass damper (LSCMD), is proposed and fabricated to verify its feasibility. The LSCMD contains a simple leverage mechanism and its stiffness can be altered by adjusting the pivot position. To determine the pivot position of the LSCMD in real time, a discrete-time direct output-feedback active control law that considers delay time is implemented. Moreover, an identification test for the transfer function of the pivot driving and control systems is proposed. The identification results demonstrate the target displacement can be achieved by the pivot displacement in 0-2 Hz range and the control delay time is about 0.1 s. A shaking-table test has been conducted to verify the theory and feasibility of the LSCMD. The comparisons of experimental and theoretical results of the LSCMD system show good consistency. It is shown that dynamic behavior of the LSCMD can be simulated correctly by the theoretical model and that the stiffness can be properly adjusted by the pivot position. Comparisons of experimental results of the LSCMD and passive TMD show the LSCMD with less demand on the mass damper stroke than that for the passive TMD.

Induced Magnetic Anisotropy of Sputtered FeN Films Due to Substrate Tilting

  • Park, Y.;S. Ryu;S. Jo
    • Journal of Magnetics
    • /
    • 제2권1호
    • /
    • pp.22-24
    • /
    • 1997
  • FeN thin films were deposited by RF-reactive diode sputtering to investigate magnetic characteristics variation due to substrate tilt during the film deposition, and their magnetic properties were measured by VSM, SEM and AFM. When the substrate tilt pivot edges were parallel to the applied field, the magnetic anisotropy was increased When the substrate tilt pivot edges were perpendicular to the applied field, the easy magnetization axis became the hard magnetization axis, and the hard axis became the easy axis as the tilt angles were increased. The reason is believed to be due to the fact that the tilt induced shape magnetic anisotropy became larger than the field induced magnetic anisotropy by DC magnetic field as the crystal grains are enlongated along the substrate tilt pivot edges due to "oblique incidence anisotropy" commonly found in eveporated thin films.

  • PDF

내진보강을 위한 피봇형 변위 증폭 감쇠 시스템의 성능 평가 (Performance Evaluation of a Pivot-Type Displacement Amplification Damper System for Seismic Strengthening)

  • 박장호;안성찬;박관순
    • 한국안전학회지
    • /
    • 제27권1호
    • /
    • pp.70-75
    • /
    • 2012
  • For the vibration control of earthquake-excited structures, a pivot-type displacement amplification damper system is proposed and its validity is investigated in this study. A rotational frame amplifies the stroke of the proposed damper system and it can absorb more vibrational energy compared to the conventional dampers of which strokes are not large. In order to prove the effectiveness of the system, time-history analyses are performed with a three story building modelled by a three dimensional frame and numerical results are compared with those for a conventional V-shape braced damper system. In addition, the seismic performances are investigated according to the changes of damper capacity and location.

Multiple Pivot loading 방법을 이용한 액체 환경에서의 수평방향 힘 교정 (Lateral Force Calibration in Liquid Environment using Multiple Pivot Loading)

  • 김류운;정구현
    • Tribology and Lubricants
    • /
    • 제29권2호
    • /
    • pp.91-97
    • /
    • 2013
  • Quantifying the nanoscale force between the atomic force microscopy (AFM) probe of a force-sensing cantilever and the sample is one of the challenges faced by AFM researchers. The normal force calibration is straightforward; however, the lateral force is complicated due to the twisting motion of the cantilever. Force measurement in a liquid environment is often needed for biological applications; however, calibrating the force of the AFM probes for those applications is more difficult owing to the limitations of conventional calibration methods. In this work, an accurate nondestructive lateral force calibration method using multiple pivot loading was proposed for liquid environment. The torque sensitivity at the location of the integrated probe was extrapolated based on accurately measured torque sensitivities across the cantilever width along a few cantilever lengths. The uncertainty of the torque sensitivity at the location of the integrated tip was about 13%, which is significantly smaller than those for other calibration methods in a liquid environment.