• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.509-516
• /
• 2001

This paper introduced some advantages of the time-frequency analysis of vibration and investigated, using the time-frequency transform, the characteristics of the transient motion of a tractor seat, which occurred during the tractor traversed over a rectangular obstacle on the flat surface. The characteristics of the short-time courier and wavelet transforms as time-frequency analysis methods were introduced and discussed to figure out which is more suitable to the analysis of the transient motions of agricultural tractors. Using each transform, transient vibration of a tractor seat was analyzed. Results of the analysis showed that the transient vibration of the seat was influenced by the natural frequencies of vertical mode of chassis, pitching mode of engine and pitching mode of cab of the tractor. The time sequence of the natural mode of tractor vibration was also revealed by the time-frequency analysis. The vibration path analysis by the time-frequency transform showed that the vibration energies transmitted from the front mounts to the seat were less than those from the rear mounts. The energy reduction ratios between the cab mounts and seat were also estimated to be about 72∼78%. The front mounts showed larger reduction than the rear mounts. However, the reduction difference between the right and left sides mounts was negligibly small. The short time Fourier transform was found to be a proper method for investigating the transient motions of farm machines and their effects on the ride vibration.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.81-90
• /
• 2007

The effort identifying positioning information of the moving object in real time has been a issue not only in sport biomechanics but also other academic areas. In order to solve this issue, this study tried to track the movement of a pitched ball that might provide an easier prediction because of a clear focus and simple movement of the object. Machine learning has been leading the research of extracting information from continuous images such as object tracking. Though the rule-based methods in artificial intelligence prevailed for decades, it has evolved into the methods of statistical approach that finds the maximum a posterior location in the image. The development of machine learning, accompanied by the development of recording technology and computational power of computer, made it possible to extract the trajectory of pitched baseball from recorded images. We present a method of baseball tracking, based on object tracking methods in machine learning. We introduce three state-of-the-art researches regarding the object tracking and show how we can combine these researches to yield a novel engine that finds trajectory from continuous pitching images. The first research is about mean shift method which finds the mode of a supposed continuous distribution from a set of data. The second research is about the research that explains how we can find the mode and object region effectively when we are given the previous image's location of object and the region. The third is about the research of representing data into features that we can deal with. From those features, we can establish a distribution to generate a set of data for mean shift. In this paper, we combine three works to track baseball's location in the continuous image frames. From the information of locations from two sets of images, we can reconstruct the real 3-D trajectory of pitched ball. We show how this works in real pitching images.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.767-772
• /
• 2011

궤적생성은 로봇보행의 안정성, 연속성 그리고 보행특성을 결정하는 가장 중요한 일이다. 보통 궤적생성법으로 LIPM을 많이 쓰지만 그것은 그것의 선형화 기법 때문에 수직방향으로의 동작생성을 할 수 없다는 단점이 있다. 이 논문에서는 ELIPM이라는 새로운 궤적생성법을 제안한다. 이 궤적생성법은 전진방향의 동작은 물론이고 수직방향의 동작을 간단하게 생성할 수 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.291-293
• /
• 2003

This paper deals with a thrust generation of flapping-airfoil by dynamic stall. From many other previous research results, phase angle $ between pitching and plunging mode of flapping motion must be 90 deg. to satisfy maximum propulsive efficiency. In this case, leading edge vortex is relatively small. This phenomenon is related dynamic stall. So preventing leading edge vortex induced by dynamic stall guarantees maximum propulsive efficiency. But, in this paper we insist the leading edge vortex yields quite a positive influence on thrust generation and propulsive efficiency. In order to certify our opinion, pitching and plunging motions were calculated with the parameter of amplitude and frequency by using the unsteady, incompressible Navier-Stokes flow solver with a two-equation turbulence model. For more efficient computation, it is parallelized by MPI programming method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.792-798
• /
• 2012

This study shows the vibration characteristics of an actuator with six wire-suspensions, used in optical pickups of optical disc drives (ODDs). In this paper, the vibration characteristics of this beam structure is induced mathematically. To obtain vibration modes of focusing direction, the vibration analysis is achieved in lateral and longitudinal directions of the structure. The accuracy of induced vibration characteristics is proved by comparing mode frequencies with a finite element analysis. Finally, it is shown that mode shapes can be modified by changing design parameters in mathematical expressions.

• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1128-1136
• /
• 2012

This paper analyzes the vibration characteristics of an optical pickup actuator, which has six wire-suspensions and is used in optical disc drives(ODDs). The vibration characteristics of the actuator is mathematically described by analyzing its beam configuration and motion condition confined to lateral and longitudinal directions of the beams. The accuracy of the vibration characteristics is proved by comparing mode frequencies with a finite element analysis. Finally, it is shown that mode frequencies and shapes can be modified by changing design parameters in mathematical expressions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.30-35
• /
• 2010

The railway vehicle is a multi-body system running on the track which consists of carbody, bogie and wheelset, each of components is connected with rigid mass, spring and damper. each of components has translation motions of longitudinal (X axis), lateral(Y axis) and vertical(Z axis) direction, and rotation motions of X, Y, Z axis which are named Rolling, Pitching and Yawing. The vibration mode of railway vehicle is difficult to find the characteristics of motion during the operation on the track because these happen to independence or duplication motion caused by vehicle, wheel/rail and track irregularity etc. This paper presents the result of ramp test to show the bounce, roll, pitch and yaw mode frequency of the railway vehicle.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권2호
• /
• pp.241-249
• /
• 2008

In this study, lateral vibration analysis has been conducted on a propulsion and lift shafting system for an air cushion vehicle using ANSYS code. The shafting system is totally flexible multi-elements system including air propeller, aluminum alloy of lift fan and thin walled shaft with flexible coupling. The analysis included the lateral natural frequencies, mode shapes and harmonic analysis of the shafting system taking into account three-dimensional models for propulsion and lifting shaft system. In case of ACV the yawing and pitching rate of craft will be quite high. During yawing and pitching of craft significant gyroscopic moment will be applied to the shafting and will generate high amplitude of lateral vibration. So, such a shafting system has very intricate lateral vibrating characteristics and natural frequencies of shafting must be avoided in the range of operating revolution. The control of lateral vibration is included in this study.

• 수산해양기술연구
• /
• 제40권2호
• /
• pp.138-143
• /
• 2004

제주대학교 실습선 아라호에 정착된 능동형 횡동요 감쇠장치의 성능에 관해 연구하기 위하여 33$^{\circ}$00‘.44”N, 125$^{\circ}$59’.88 ”E 위치에서 선박을 정지한 후, 횡동요 감쇠장치를 정지 (Passive A.R.T), 작동 (Active A.R.T)을 했을 때 경사계에 의한 횡동요각 및 종동요각, 풍속계에 의한 풍속의 변화와 그리고 선박이 항해 중에 감쇠장치의 작동을 정지(Passive A.R.T), 작동(Active A.R.T) 했을 때 의 능동형 횡동요 감쇠장치의 성능을 분석한 결과에 대해 요약하면 다음과 같다. 1. 선박이 정지했을 때 횡동요 감쇠장치를 정지, 작동한 경우 횡동요각의 평균진폭 (Average Amplitude of Roll) 은 각각 8.30$^{\circ}$, 4.37$^{\circ}$, 횡동요각의 유의진폭(Significant Amplitude of Roll $_{{\pi}{1/3}}$)은 각각 10.10$^{\circ}$, 5.30$^{\circ}$으로 나타났다. 2. 선박이 항해 중 일 때에는 횡동요각의 평균진폭 (Average Amplitude of Roll)은 각각 5.01$^{\circ}$, 4.36$^{\circ}$, 횡동요각의 유의진폭 (Significant Amplitude of Roll$^{\circ}$) 은 각각 5.50$^{\circ}$, 5.10$^{\circ}$으로 각각 나타났다. 3. 횡동요 감쇠장치는 선박이 정치했을 때에는 47.5%, 선박이 운항 했을 때는 12.7% 정도의 감쇠 효율을 보여서 정지했을 때 그 효율이 높은 것으로 나타났다. 4. 횡동요 감쇠 장치는 종동요(Pitching)에 대해서는 거의 영향을 미치지 않았다.

• 항공우주기술
• /
• 제4권1호
• /
• pp.39-44
• /
• 2005

로터의 성능 예측 검증을 위해 tilt rotor aeroacoustic model(TRAM)에 대한 3차원 CFD 해석을 수행하였고 로터 파워 효과에 의한 영향을 분석하기 위해 수치해석을 행하였다. 수치 기법은 multiple reference method(MRF)와 sliding mesh technique을 사용하였다. TRAM 실험치와 비교 결과 정지 비행시에는 수치해석이 실험보다 적은 추력을 예측하였고 전진 비행시에는 실험결과와 매우 유사한 결과를 예측하였다. 로터효과를 고려한 비행체의 양력은 감소하고 항력 및 피칭 모멘트는 거의 변화가 없는 것으로 판단된다.