• 한국운동역학회지
• /
• 제30권1호
• /
• pp.1-6
• /
• 2020

Objective: The incidence rate of elbow ulnar collateral ligament injuries is dependent on the throwing speed or pitching type, especially in adolescent baseball players. However, mixed results have been reported due to a lack of controlled biomechanical analysis. Thus, the purpose of this study was to investigate the biomechanical analysis of the elbow in relation to throwing speed and pitching type. Method: Four overhead type high-school baseball players were recruited for this study. The participants were asked to throw balls with different types of pitch and speed. While the throwing speeds were measured, each pitching moment of the elbow was recorded. Descriptive statistics, frequency analysis, mean comparison analysis, and Pearson's correlation analysis were performed in order to examine differences in peak varus and valgus moment during pitching motion in the elbow in all throwing speed and pitching types. Results: There was no significant difference in physical characteristics, throwing speed, and momentum variability among all players. The mean varus moments were 44.38±1.55 Nm, 48.83±1.66 Nm, and 48.94±0.95 Nm, and the moment gaps between varus and valgus were 7.36±3.25 Nm, 7.44±2.02 Nm, and 7.36±2.62 Nm in fastball, curveball, and slider ball, respectively. The varus moment was higher in the curved and slider balls than in the fastballs, and there was no significant differences between the varus moments regarding the pitching type. However, the increase in valgus moment and decrease in moment gap according to throwing speed was significantly increased in the slider ball (r=0.718 and -0.591, respectively). Conclusion: The possibility of elbow injury caused by the valgus moment or moment gapincreases more rapidly in slider balls as the speed increases. Based on our results, appropriate pitching guidelines should be suggested to prevent ulnarligament injuries, especially in adolescent baseball players.

• 스마트미디어저널
• /
• 제13권4호
• /
• pp.16-22
• /
• 2024

투구는 야구의 시작이라 할 만큼 야구에서 주요한 부분을 차지한다. 투구 동작의 정확한 분석은 경기력 향상과 부상 예방 측면에서 매우 중요하다. 올바른 투구 동작을 분석할 때, 현재 주로 사용되는 모션캡처는 환경적으로 치명적인 단점들이 몇 가지 존재한다. 본 논문에서 우리는 이러한 단점들이 존재하는 모션캡처를 대체하기 위하여 RGB 기반의 Human Pose Estimation(HPE) 모델을 활용한 투구 동작의 분석을 제안하며 이에 대한 신뢰도를 검증하기 위해 모션캡처 데이터와 HPE 데이터의 관절 좌표를 Dynamic Time Warping(DTW) 알고리즘의 비교를 통해 두 데이터의 유사도를 검증하였다.

• 한국자동차공학회논문집
• /
• 제3권5호
• /
• pp.100-110
• /
• 1995

The human subject perception response according to vertical vibration and pitching was analyzed with a five degree of freedom model. The vehicle dynamic system with the delayed colored noise excitation and the passenger perception response was arranged as an integrated viration system and could be analyzed simultaneously for seven different combination of vehicle suspension. ISO2631 and BS6841 was adapted for analyzing the passenger perception reponse. Simulation results shows that passenger feel relatively less discomfort due to pitching compared to vertical vibration and road type was not necessary to be considered as a design parameter in view of comfort analysis.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.154-160
• /
• 1998

Ride quality of medium truck became a very important factor in the suspension design, to the demand of more comfortable ride of passengers. This study describes how to determine and evaluate design parameters related to the chassis suspension system with time and frequency analysis. The spring stiffness and damping force of the chassis suspension system were obtained by observing the vertical acceleration PSD. The simulation was carried out on various road profiles, which was suggested by ISO. The pitching motion of the medium size truck was observed to improve the ride quality. A computer simulated truck model was constructed using DADS, a commercial dynamic analysis software, in order to simulate the truck motions. From the analyzed process of suspension parameters, it was concluded that the spring and the shock absorbers affect the pitching of the vehicle. In order to validate the computer simulated truck model, a physical prototype was constructed and tested.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1695-1702
• /
• 2015

This paper presents the characteristic analysis and experiment of force characteristics in permanent magnet linear synchronous motor for accuracy prediction of linear motion machine tools. In particular, the pitching moment resulting from attraction force ripple has been analysed and tested. Firstly, we analysed the characteristics of detent force, attraction force, and pitching moment in permanent magnet linear synchronous motor according to the design techniques such as auxiliary teeth, chamfering, and permanent magnet skewing. In addition, we suggested the experimental set for measurement of pitching moment. Finally, the results from measurement shows the good agreement with those obtained from finite element analysis results.

• 대한정형도수물리치료학회지
• /
• 제29권2호
• /
• pp.39-48
• /
• 2023

Background: The position of pitcher requires a lot of repetitive motion, and because of this, it is known that not only professional baseball players, but also middle and high school players are frequently exposed to injuries in baseball. The purpose of this study is to examine the differences in upper extremity muscle activity during repeated pitching and the activity of each muscle during repeated pitching by analyzing middle and high school pitchers, divided into groups by age. Methods: Twenty participants (10 middle school male students and 10 high school male students) were recruited for this research. The outcome measures included neuromuscular motor control, including the upper trapezius (UT), triceps brachii (TB), deltoid (DT), latissimus dorsi (LD), biceps brachii (BB), pectoralis major(PM), extensor carpi radialis(ER), and flexor carpi radialis (FR). Results: The two-way analysis of varaince (ANOVA) was used to compare the muscle activity variables between the middle school and high school students. The one-way ANOVA was used to compare the muscle activity variables within time differences each groups. Conclusion: Our results provided promising clinical evidence that guide for upper extremity muscles to increase pitching efficiency in middle and high school base ball players.

• 한국운동역학회지
• /
• 제12권2호
• /
• pp.109-130
• /
• 2002

따라서 본 연구의 목적은 국가대표 수준급 대학 우수 야구 투수를 대상으로 한 3차원 영상분석을 통한 데이터를 가지고 직구 커브볼에 대한 구간별 운동학적 패턴을 비교 분석하여 자료를 제시하는데 있다. 본 연구는 부산 D대학교 우완 오버핸드 투수 가운데 국가대표 2명과 수준급 대학선수 2명, 총 4명을 대상으로 직구 커브 투구시 구간별로 나타나는 여러 운동학적 변인의 차이를 비교 분석한 결과 다음과 같은 결론을 얻었다. 직구 및 커브볼 투구시 구간별, 국면별 투구시간은 거의 비슷하게 나타냈으며, 직구의 총 소요시간은 1.78${\pm}$0.07초이며 커브 총 소요시간은 1.77${\pm}$0.11초로 나타났다. 직구 및 커브볼 투구시 Z(상 하)방향에 대한 신체 중심의 위치변화는 구간별, 국면별 거의 차이가 나지 않았다. 직구 및 커브볼 투구시 왼쪽 다리의 무릎높이는 각각 $125.38{\pm}11.85cm,\;124.95{\pm}11.63cm$로 큰 차이가 없었다. 신장대비율(%H)로는 직구, 커브 각각 68.42${\pm}$5.53(%H), 68.40${\pm}$5.45(%H)로 나타났다. 직구 및 커브볼 투구시 스트라이드 거리는 각각 140.35${\pm}$4.96cm, 144.83${\pm}$1.69cm로 커브 투구시 더 많은 스트라이드 거리를 보였다. 직구 및 커브볼 투구시 왼쪽 슬관절 ST 구간과 LKU 구간, HBP 구간에서는 별 차이가 없었지만 LFC, MCP, BRP구간에서는 직구보다 커브 투구시 슬관절 각도가 더 굴곡 된 것으로 나타났다. 직구 및 커브볼 투구시 오른팔 견관절 각도는 ST 구간과 LKU구간, HBP 구간에서는 별차이가 없었다. 직구 및 커브볼 투구시 오른팔 주관절 각도는 ST 구간과 LKU구간, HBP 구간에서는 별차이 가 없었다. LFC구간과 MCP구간에서는 직구보다 커브가 다소 많이 굴곡되었고, BRP구간에서 는 직구, 커브 모두 다 근소한 차로 신전 된 것으로 나타났다. 직구 및 커브볼 투구시 오른팔 수관절 각도는 LFC 구간과 MCP 구간에서는 커브가 직구보다 더 신전되었다. 그리고 BRP 구간은 직구가 커브보다 더 신전 된 것으로 나타났다.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.71-78
• /
• 2011

A kart is a vehicle without the suspension system and the differential gear. The kart frame as an elastic body plays the role of a spring. By the cornering of a kart, rolling, pitching and twisting motions are induced in the kart frame. Also the slip or noncontact of the wheel and a permanent deformation of the kart frame can be induced. In order to examine closely this phenomenon, measurement on height-displacements with various sensors and tracking system and analysis on the kart frame twisting characteristics with the rolling and pitching angle are needed. According to the measurement result, while driving in a curve at high speed the kart frame is quite twisted. Analysis on the measurement results shows that a kart used primarily in high speed requires a frame with low torsional stiffness and a frame material with high tensile strength and large elongation.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.53-59
• /
• 2011

In this study, steady and unsteady aerodynamic analyses of a huge rocket configuration have been conducted in a transonic flow region. The launch vehicle structural response are coupled with the transonic flow state transitions at the nose of the payload fairing. Before performing the coupled fluid-structure transonic aeroealstic simulations transonic aerodynamic characteristics are investigated for the pitching motions of the rocket at finite angle-of-attack. An unsteady CFD analysis method with a moving grid technique based on the Reynolds-averaged Navier-Stokes equations with the k-w SST transition turbulence model is applied to accurately predict the transonic loads of the rocket at pitching motion. It is shown that the fluctuating amplitude of the lateral aerodynamic loads imposed on the rocket due to the pitching motion can be significantly increased in the transonic flow region.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.924-929
• /
• 2001

The flying height of contact slider is determined by vertical and pitching motions of slider. This paper performed the computer simulation for flying height change of contact slider. It is changed by many parameters, contact stiffness, contact damping, air bearing stiffness ratio, a location of mass center, and so on. Computer simulation is performed for knowing for what change of these parameters influences in flying height of contact slider. Disk surface is modeled in harmonic wave with from 10㎑ to 600㎑. Tri-pad slider is modeled in that contact slider has 2-DOF motion (vertical motion, pitching motion). Tri-pad contact slider is analyzed by numerical analysis method in computer simulation.