• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.704-709
• /
• 2004

This paper presents the laser processing to adjust the roll and pitch directions of the flex suspension assembly for hard disk drive production. The adjustment is accomplished using a number of laser beam projections that can be approximated using the regression model of the existing measured roll and pitch directions. Information derived from the analysis can be applied to control the quality of flex suspension assembly. The performances of the proposed technique were observed using the flex suspension assembly plant in Thailand as an illustrative case study. The experimental results are given to support the improving manufacturing yields and some economic benefits of the proposed technique.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.603-606
• /
• 1998

In a large number of words and the continued speech recognition system using a phoneme as teh recognition unit, it is necessary to segment processing. In this paper, a normalized AMDF new method. The suggested parameter represents a degree of sharpness at valley point. This method can detect the speech segment between the steady state and transient region to the continued speech without a prior information of speech signal.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.630-633
• /
• 2003

Integrating the driver circuitry directly onto the glass substrate would be one of the advantages of polycrystalline Si (poly-Si) TFT-(LCD). Low-temperature poly-Si TFT(LTPS) is well-suited for higher-definition display applications due to its intrinsically superior electrical characteristics. In order to improve LTPS electrical characteristics, currently the excimer laser-induced crystallization (ELC) processes and sequential lateral solidification method were developed. Grain size of the poly-Si is mainly affected by beam pitch and energy density. Key parameter for making a larger poly-Si using excimer laser annealing(ELA) and increasing a throughput is due to increase in beam pitch and energy density to a certain degree. Furthermore, thin $SiO_{2}$ capping is effective to suppress the protrusion of the poly-Si thin films and to reduce the interface state density. From the ELA process, we are able to control grain size by varying different parameters such as number of shots and energy density.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.167-170
• /
• 2000

Recently the sub-micron structured substrates of 0.74 ${mu}ell$ track pitch and 800 $\AA$groove depth are required for DVD-RAM and the track pitch is expected to be narrower as the need for the information storage density is getting higher. For the accurate replication of the land-groove structure in the stamper to the plastic substrates it is important to control the injection -compression molding process such that the integrity of the replication for the land-groove structure is maximized. in the present study polycarbonate substrates were fabricated by injection comression molding and the land-groove structure regarded as one of mold temperature and the compression pressure on the integrity of the replication were examined experimentally. An efficient design methodology using the response surface method (RSM) the central composite design(CCD) technique and the analysis-of-variance (ANOVA) was developed to obtain the optimum processing conditions which maximize the integrity of the replication with a limited number of experiments.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.225-228
• /
• 2000

It is well known that a Frequency Domain Adaptive Filter (FDAF) converges faster than a Time Domain Adaptive Filter (TDAF) even when the input signal is colored such as a speech signal. We have proposed the FDAF using the Modified Discrete Fourier Transform Pair (MDFTP) and its realization and effectiveness has been confirmed through the computer simulations. In this paper, we apply the FDAF using the MDFTP to the noise cancellation system. The proposed system is based on the Adaptive Line Enhancer (ALE) and utilizes single microphone; therefore it is suitable for the portable electronic equipment. Moreover, we propose to utilize the MDFT for detecting of the pitch in the speech because the number of data points in the MDFT must be equal to the pitch to confirmed that the noise can be removed to near the level of SNR.

• Speech Sciences
• /
• v.15 no.2
• /
• pp.7-19
• /
• 2008

Information structure can be conveyed by prosodic structure (Poser 1984 for Japanese; Inkelas and Leben 1990 for Hausa; Cho 1990 for Korean; Hayes and Lahiri 1991 for Bengali; Selkirk and Shen 1990 for Shanghai Chinese). Different subfields of linguistics and different theoretical perspectives suggest many distinct types of information structure: topic vs. comment, focus vs. background. old vs. new information, etc. The purpose of this paper is to investigate phonetic realizations of focus and topic among these information structures in Korean. For this purpose, we conduct a phonetic experiment where we examine duration, pitch and dephrasing in focus and topic structures. We make four findings through this study. First, duration of 'nun' varies depending on the information structure of the following constituent. Second, the degree of accentual phrase-initial rising is larger in contrastive topic and focused phrases than in neutral phrases. Third, a contrastive topic phrase always constitutes an Intonation Phrase on its own. Fourth, dephrasing occurs variously depending on gender and the number of the syllables within a phrase.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.8-16
• /
• 2020

In this paper, a single-bit 2nd-order delta-sigma modulator with the architecture of cascaded-of-integrator feedforward (CIFF) is proposed for column-parallel analog-to-digital converter (ADC) array used in a low noise CMOS image sensor. The proposed modulator implements two switched capacitor integrators and a single-bit comparator within only 10-㎛ column-pitch for column-parallel ADC array. Also, peripheral circuits for driving all column modulators include a non-overlapping clock generator and a bias circuit. The proposed delta-sigma modulator has been implemented in a 110-nm CMOS process. It achieves 88.1-dB signal-to-noise-and-distortion ratio (SNDR), 88.6-dB spurious-free dynamic range (SFDR), and 14.3-bit effective-number-of-bits (ENOB) with an oversampling ratio (OSR) of 418 for 12-kHz bandwidth. The area and power consumption of the delta-sigma modulator are 970×10 ㎛2 and 248 ㎼, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.709-719
• /
• 2021

Recent progress in analysis and flight simulation methods enables wider use of a virtual certification and reduces number of certification flight tests. Aerodynamic database (AeroDB) is one of the most important components for the flight simulation. It is composed of aerodynamic coefficients at a range of flight conditions and control deflections. This paper proposes and efficient method for construction of AeroDB that combines Gaussian Process based Variable Fidelity Modeling with adaptive sampling algorithm. A case study of virtual certification of a F-16 fighter is presented. Four AeroDB were constructed using different number and distribution of high-fidelity data points. The constructed database is then used to simulate gliding, short pitch, and roll response. Compliance with certification regulations is then checked. The case study demonstrates that the proposed method can significantly reduce number of high-fidelity data points while maintaining high accuracy of the simulation.

• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1237-1253
• /
• 2018

Harmony search algorithm is an emerging meta-heuristic optimization algorithm, which is inspired by the music improvisation process and can solve different optimization problems. In order to further improve the performance of the algorithm, this paper proposes an improved harmony search algorithm. Key parameters including harmonic memory consideration (HMCR), pitch adjustment rate (PAR), and bandwidth (BW) are optimized as the number of iterations increases. Meanwhile, referring to the genetic algorithm, an improved method to generate a new crossover solutions rather than the traditional mechanism of improvisation. Four complex function optimization and pressure vessel optimization problems were simulated using the optimization algorithm of standard harmony search algorithm, improved harmony search algorithm and exploratory harmony search algorithm. The simulation results show that the algorithm improves the ability to find global search and evolutionary speed. Optimization effect simulation results are satisfactory.

• Korean Journal of Optics and Photonics
• /
• v.21 no.6
• /
• pp.247-253
• /
• 2010

A dual-layer light guide plate (DLGP) was designed and a simulation was done to optimize the structure of the light guide plates used at backlight units while maintaining the luminance, uniformity and viewing angle by reducing the optical sheet. The characteristic of DLGP with prism pattern with curvature on the top surface is simulated and the luminance and uniformity are obtained. In order to improve the uniformity, the V groove prism pattern on the bottom surface was turned by an angle of $90^{\circ}$. In particular, we used the pitch calculation program to select the value of the ratio (Max : Min) between the pitch at the extreme outside and the pitch at the middle, the number of V groove lines and the variance at the bottom pattern of DLGP. After that, the optimum distance between V grooves was determined. For optimizing the DLGP, we examined the uniformity again by changing the number of pattern grooves on the bottom surface of DLGP. As a result of the simulation, we find that the BLU with DLGP has a uniformity of 90.6% and viewing angle $145^{\circ}$.