• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1126-1133
• /
• 1994

When designing an internal gear. the bending strength around pitch point as well as that at tooth root fillet should be considered because the bending stress around pitch point may occur as high as that at tooth root fillet. In this study, including stress state around pitch point, the bending strength (tensile side and compressive side) of internal gear tooth is investigated by the use of the finite element method(FEM) with regarding many influencing factors of cutter and gear geometries. Then, the critical sections around pitch point and at tooth root fillet are determined, and the simple formulae based on nominal stresses(bending, compressive, and shear) are derived for the calculations of actual stresses as the functions of tooth thicknesses and radii of curvatures of involute and fillet curve at those critical sections. The stresses calculated by the formulae agree well with those by the FEM. And the bending stresses around pitch point and at tooth root are easily estimated by the use of those formulae, therefore, those formulae are useful for the purpose of the design or the bending strength estimation of internal gear.

• Carbon letters
• /
• 제23권
• /
• pp.22-29
• /
• 2017

The compressive strength and electrical resistance of pitch-based carbon fiber (CF) in cementitious materials are explored to determine the feasibility of its use as a functional material in construction. The most widely used CFs are manufactured from polyacrylonitrile (PAN-based CF). Alternatively, short CFs are obtained in an economical way using pitch as a precursor in a melt-blown process (pitch-based CF), which is cheaper and more eco-friendly method because this pitch-based CF is basically recycled from petroleum residue. In the construction field, PAN-based CFs in the form of fabric are used for rehabilitation purposes to reinforce concrete slabs and piers because of their high mechanical properties. However, studies have revealed that construction materials with pitch-based CF are not popular. This study explores the compressive strength and electrical resistances of a cement paste prism using pitch-based CF.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.20-28
• /
• 2017

피치계 탄소섬유를 함유한 모르타르의 직접인장강도는 평균압축강도의 1/27~1/22에 해당하였다. 동일 양의 PAN계 탄소섬유를 함유한 모르타르의 직접인장강도가 1/15임에 비하여, 낮은 수준으로 나타났다. 이 때, 무보강 기준시편의 직접인장강도는 1/29 수준이었다. 피치계 탄소섬유를 함유한 모르타르의 휨인장강도는 평균압축강도에 비해, 약 1/12 수준으로 나타났고, PAN계 탄소섬유를 함유한 모르타르와 무보강 모르타르는 각각 1/10, 1/13.5의 수준으로 나타났다. 피치계 탄소섬유를 혼입한 모르타르의 인장성능은 무보강 모르타르와 PAN계 탄소섬유를 혼입한 모르타르의 중간 수준으로 나타났다.

• Tribology and Lubricants
• /
• 제37권2호
• /
• pp.48-53
• /
• 2021

Wind energy is considered as the most competitive energy source in terms of power generation cost and efficiency. The power train of the pitch drive for a wind turbine uses a 3-stage complex planetary gear system in being developed locally. A gear train of the pitch drive consists of an electric or hydraulic motor and a planetary decelerator, which optimizes the pitch angle of the blade for wind generators in response to the change in wind speed. However, it is prone to many problems, such as excessive repair costs in case of failure. Complex planetary gears are very important parts of a pitch drive system because of strength problem. When gears are designed for the power train of a pitch drive, it is necessary to analyze the fatigue strength of gears. While calculating the specifications of the complex planetary gears along with the bending and compressive stresses of the gears, it is necessary to analyze the fatigue strength of gears to obtain an optimal design of the complex planetary gears in terms of cost and reliability. In this study, the specifications of planetary gears are calculated using a self-developed gear design program. The actual gear bending and compressive stresses of the planetary gear system were analyzed using the Lewes and Hertz equation. Additionally, the calculated specifications of the complex planetary gears were verified by evaluating the results from the Stress - No. of cycles curves of gears.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.560-567
• /
• 1998

The pitch of spot-weld is a important variable in a view of both production cost and strength of car-body. Various renditions for the selection of pitches have been researched and especially in this paper the buckling analysis is carried out for the 2-sheet pannel structures. The optimal pitch is obtained by optimization program and FEM, which can enhance the buckling strength.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.354.1-354
• /
• 2002

Pitch is a perception related to frequency, one of the psychological aspects or attributes of tones, and an important factor to determine sound quality of sound together with loudness and timber. while a study on pitch has been actively achieved In the part of speech recognition and speech separation, that for analysis and improvement of product sound quality is not yet enough. (omitted)

• Carbon letters
• /
• 제15권3호
• /
• pp.162-170
• /
• 2014

Pitch is an attractive raw material for carbon fiber precursors due to its low cost stemming from its availability as a residue of coking and petroleum processes. Ford Motor Company reported a carbon fiber target price of $11.0/kg by using a fast cycle-time manufacturing method with carbon fiber in an inexpensive format, allowing for an average retail price of gasoline of $3.58/gallon. They also recommended the use of carbon fiber with strength of 1700 MPa, modulus of 170 GPa, and 1.5% elongation. This study introduced a ca. $5.5{\mu}m$ carbon fiber with 2000 MPa tensile strength obtained from a precursor through simple distillation of petroleum residue. Petroleum pitch based carbon nanofibers prepared via electrospinning were characterized and potential applications were introduced on the basis of their large specific surface area and relatively high electrical conductivity.

• Carbon letters
• /
• 제16권2호
• /
• pp.121-126
• /
• 2015

Carbon fibers are prepared by stabilizing pitch fibers accompanying electron beam (E-beam) irradiation. The carbon fibers pretreated by E-beam irradiation achieve a higher stabilization index than the carbon fibers that are only heat-stabilized. In addition, the carbon fibers subjected to E-beam irradiation in the stabilization step exhibit a comparable tensile strength to that of general purpose carbon fibers. The carbon fibers pretreated with an absorbed dose of 3000 kGy have a tensile strength of 0.54 GPa for a similar fiber diameter. Elemental, Fourier-transform infrared spectroscopy, and thermogravimetric analyses indicate that E-beam irradiation is an efficient oxidation and dehydrogenation treatment for pitch fibers by showing that the intensity of the aliphatic C-H stretching and aromatic $CH_2$ bending (out-of-plane) bands significantly decrease and carbonyl and carboxylic groups form.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.182-188
• /
• 2016

In this paper, a feasible strategy for the recycling of nuclear graphite is reported, based on the formation mechanism and the removal of carbon-14 by micro-oxidation. We investigated whether ground micro-oxidation graphite could be used as a filler to make new recycled graphite and which graphite/pitch coke ratio will give the recycled graphite outstanding properties (e.g., apparent density, flexural strength, compressive strength, and tensile strength). According to the existing properties of nuclear graphite, the ratio of graphite to pitch coke should not exceed 3. The recycled reactor graphite has been proven superior in density, strength, and thermal conductivity. The micro-oxidation process enhances the strength of the recycled graphite because there are more pores and unsmooth surfaces on the oxidized graphite particles, which is beneficial for the access of the pitch binder and leads to efficient joint adhesion among the graphite particles.

• 공업화학
• /
• 제26권6호
• /
• pp.706-713
• /
• 2015

그라파이트 폼이 polyvinyl alcohol-acrylic acid (PVA-AAc) 용액에 다양한 함량의 메조페이스 핏치(mesophase pitch, MP)를 첨가한 후 열처리를 통해 제조되었다. 그라파이트 폼의 공극 크기는 슬러리 농도(고분자 용액에 첨가된 메조페이스 핏치의 함량)에 따라 조절되며, 그 열 전도도 및 압축강도는 각각의 조건에서 형성된 그라파이트 폼의 공극률에 의해서 조절됨을 확인하였다. 본 실험에서 얻어진 그라파이트 폼은 공극률 0.69에서 $53.414{\pm}0.002W/mK$의 가장 높은 열전도도 및 $1.348{\pm}0.864MPa$의 압축강도 값을 나타내었다. 메조페이스 핏치 기반의 그라파이트 폼의 열전도도는 등방성 핏치 기반의 그라파이트 폼에 비하여 흑연화 구조의 발달로 인하여 그 값이 23배로 크게 증가되었다.