• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.712-713
• /
• 2011

In this paper, the AMBA AXI slave unit that can verify the pipelined arithmetic unit is proposed and the 2-stage 16-bit pipelined multiplier is introduced as design example. The proposed AXI slave unit consists of input buffer block memory, control registers, pipelined arithmetic unit, control unit, output buffer block memory, and AXI slave interface unit. The main operational procedures are divided into the following steps, such as burst-mode input data loading for the input buffer memory, programming of control registers, arithmetic operations for block data in the input buffer memory, and burst-mode output data unloading from output buffer memory to host processor. Because the proposed AXI slave unit is general structure, it can be efficiently applicable to AMBA AXI and AHB slave unit with pipelined arithmetic unit.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.225-225
• /
• 2004

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.570-576
• /
• 2004

In this paper, we design the IFFT/FFT (Inverse fast Fourier Transform/Fast Fourier Transform) modules for IEEE 802.11a-1999, which is a standard of the High-speed Wireless LAN using the OFDM (Orthogonal Frequency Division Multiplexing). The designed IFFT/FFT is the 64-point FFT to be compatible with IEEE 802.11a and the pipelined architecture which needs neither serial-to-parallel nor parallel-to-serial converter. We compare four types of IFFT/FFT modules for the hardware complexity and operation : R22SDF (Radix-2 Single-path Delay feedback), the R2SDF (Radix-2 Single-path Delay feedback), R2SDF (Radix-4 Single-path Delay Feedback), and R4SDC (Radix-4 Single-path Delay Commutator). In order to minimize the error, we design the IFFT/FFT module to operate with additional decimal parts after butterfly operation. In case of the R22SDF, the IFFT/FFT module has 44,747 gate counts excluding RAMs and the minimized error rate as compared with other types. And we know that the R22SDF has a small hardware structure as compared with other types.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.18-27
• /
• 1994

An 8-bit 2-stage pipelined current mode A/D converter is designed with a new architecture, where the wideband track-and-hold amplifiers which have 2 integrators in parallel sample input signal twice per clock cycle. The conversion speed of the A-D converter is two times faster than that of conventional pipelined method. The converter is designed to be operated at the power supply voltage of 3.3V with the input dynamic range of 0-256$\mu$A. HSPICE simulation results show the performance of up to 55Msamples/s and power consumption of 150mW with the parameters of ISRC $1.5\mu$m BICMOS process. The chip area is 3${\times}4mm^{2}$.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.7-10
• /
• 2004

This paper describes techniques to implement low-cost adapt ive Pipelined LMS filter for ASIC implement ions of high communication receivers. Power consumpiton can be reduced using a careful selection of architectural, algorithmic, and VLSI circuit techlifue A Pipelined architecture for the strength-reduced algorithm is then developed via the relaxed look-ahead transformation. This technique, which is an approximation of the conventional look-ahead compution, maintains the functionality of the algorithm rather than the input-output behavior Convergence maiysis of the Proposed architecture has been presented and support via simulation results. The resulting pipelined adaptive filter achives a higher though put requires lower power as compared to the filter using the serial algorithm.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.374-385
• /
• 2019

This paper presents an optimal implementation of a Daubechies-based pipelined discrete wavelet packet transform (DWPT) processor using finite impulse response (FIR) filter banks. The feed-forward pipelined (FFP) architecture is exploited for implementation of the DWPT on the field-programmable gate array (FPGA). The proposed DWPT is based on an efficient transpose form structure, thereby reducing its computational complexity by half of the system. Moreover, the efficiency of the design is further improved by using a canonical-signed digit-based binary expression (CSDBE) and advanced functional sharing (AFS) methods. In this work, the AFS technique is proposed to optimize the convolution of FIR filter banks for DWPT decomposition, which reduces the hardware resource utilization by not requiring any embedded digital signal processing (DSP) blocks. The proposed AFS and CSDBE-based DWPT system is embedded on the Virtex-7 FPGA board for testing. The proposed design is implemented as an intellectual property (IP) logic core that can easily be integrated into DSP systems for sub-band analysis. The achieved results conclude that the proposed method is very efficient in improving hardware resource utilization while maintaining accuracy of the result of DWPT.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.53-67
• /
• 1994

This paper describes the design of a high-level synthesis system. SODAS-VP. which automatically generates hardwares executing operation sequences in pipelined fashion.Target architecture and clocking schemes to drive pipelined datapath are determined, and the handling of pipeline hazards which degrade the performance of pipeline is considered. Partitioning of an operation into load, operation, and store stages, each of which is executed in partitiones control step, is performend. Pipelinecl hardware is generated by handling pipeline hazards with internal forwarding or delay insertion techniques in partitioning process and resolving resource conflicts among the partitioned control steps with similarity measure as a priority function in module allocation process. Experimental results show that SODAS-VP generates hardwares that execute faster than those generated by HAL and ALPS systems. SODAS-VP brings improvement in execution speed by 17.1% and 7.4% comparing with HAL and ALPS systems for a MCNC benchmark program, 5th order elliptical wave filter,respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.837-840
• /
• 2005

This paper presents 3D graphics lighting processor based on vector processing using pipeline chaining. The lighting process of 3D graphics rendering contains many arithmetic operations and its complexity is very high. For high throughput, proposed processor uses pipelined functional units. To implement fully pipelined architecture, we have to use many functional units. Hence, the number of functional units is restricted. However, with the restricted number of pipelined functional units, the utilization of the units is reduced and a resource reservation problem is caused. To resolve these problems, the proposed architecture uses vector processing using pipeline chaining. Due to its pipeline chaining based architecture, it can perform 4.09M vertices per 1 second with 100MHz frequency. The proposed 3D graphics lighting processor is compatible with OpenGL ES API and the design is implemented and verified on FPGA.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.63-66
• /
• 1999

Echo and near-end crosstalk(NEXT) can be generated in two-wire duplex transmission. In this paper investigates how to cancel echoes of high speed communication. A pipeline algorithm is used to remove the echoes that high speed communication. It is least mean squared(LMS) algorithm based on the relaxed look-ahead concept, is focused on the pipelined LMS, and its performance is compared to that of the serial LMS algorithm. And we design pipelined adaptive filtering. In advanced of the hardware implementation with VHDL code the performance of pipelined LMS algorithm is verified by the computer simulation.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.49-57
• /
• 2006

This paper describes the architecture for reducing its size and increasing the computation rate in implementing the SEED algorithm of a 12B-bit block cipher, and the result of the circuit design. In order to increase the computation rate, it is used the architecture of the pipelined systolic array, This architecture is a simple thing without involving any buffer at the input and output part. By this circuit, it can be recorded 320 Mbps encryption rate at 10 MHz clock. We have designed the circuit with the VHDL coding, implemented with a FPGA of 50,000 gates.