• Journal of the Korea Computer Industry Society
• /
• v.2 no.9
• /
• pp.1183-1190
• /
• 2001

In this paper, it used a different pipeline method from conventional method which is encoding the video signal of analog with digital. It designed with pipeline structure of 4 phases as the pixel clock ratio of the whole operation of the encoder, and secured the stable operational timing of the each sub-blocks, it was visible the effect which reduces a gate possibility as designing by the ROM table or the shift and adder method which is not used a multiplication flag method of case existing of multiplication of the fixed coefficient. The designed encoder shared with the each sub-block and it designed the FPGA using MAX+PLUS2 with VHDL.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.629-630
• /
• 2006

This paper presented a hardware implementation of ARIA, which is Korean standard block ciphering algorithm. In this work, we proposed a improved architecture based on pipeline structure and confirmed that the design operates in a clock frequency of 101.7MHz and in throughput of 957Mbps in Xilinx FPGA XCV-1600E.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.169-172
• /
• 2001

In this paper, it used a different pipeline method from conventional method which is encoding the video signal of analog with digital. It designed with pipeline structure of 4 phases as the pixel clock ratio of the whole operation of the encoder, and secured the stable operational timing of the each sub-blocks, it was visible the effect which reduces a gate possibility as designing by the ROM table or the shift and adder method which is not used a multiplication flag method of case existing of multiplication of the fixed coefficient. The designed encoder shared with the each sub-block and it designed the FPGA using MAX+PLUS2 with VHDL.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2675-2680
• /
• 2010

Computation steps for 3D graphic processing consist of two stages - fixed operation stage and programming required stage. Using this characteristic of 3D pipeline, a hybrid structure between graphics hardware designed by fixed structure and programmable hardware based on instructions, can handle graphic processing more efficiently. In this paper, fragment Shader is designed under this hybrid structure. It also supports OpenGL ES 2.0. Interior interface is optimized to reduce the delay of entire pipeline, which may be occurred by data I/O between the fixed hardware and the Shader. Interior register group of the Shader is designed by an interleaved structure to improve the register space and processing speed.

• Smart Structures and Systems
• /
• v.18 no.4
• /
• pp.643-662
• /
• 2016

The monitoring of structural integrity of pipeline tapered thread connections is of great significance in terms of safe operation in the industry. In order to detect effectively the loosening degree of tapered thread connection, an active sensing method using piezoceramic transducers was developed based on time reversal technique in this paper. As the piezoeramic transducers can be either as actuators or sensors to generate or detect stress waves, the energy transmission for tapered thread connection was analyzed. Subsequently, the detection principle for tapered thread connection based on time reversal was introduced. Finally, the inherent relationship between the contact area and tightness degree of tapered thread connection for the pipe structural model was investigated. Seven different contact area scenarios were tested. Each scenario was created by loosening connectors ranging from 3 turns to 4.5 turns in the right tapered threads when the contact area in the left tapered threads were 4.5 turns. The experiments were separately conducted with a highly noisy environment and various excitation signal amplitudes. The results show the focused peaks based on time reversal have the monotonously rising trend with the increase of the contact areas of tapered threads within an acceptable monitoring resolution for metal pipes. Compared with the energy method, the proposed time reversal based method to monitor tapered threads loosening demonstrates to be more robust in rejecting noise in Structural Health Monitoring (SHM) applications.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.283-287
• /
• 2008

The drag reduction agency (DRA) for gas pipeline, a novel method used for reducing friction or drag on a gas flowing to increase the transmission efficiency of gas pipeline, is a more flexible and economical technology than internal flow efficient coatings. In this paper, an effective DRA has been developed in Authors' Institute by analyzing the hydrodynamic friction resistance on internal gas pipeline and then studying the work mechanism and molecular structure of DRA. In the meantime, a group of property test for selecting DRA material has been determined, including viscosity, contact angle, volatility, corrosion, slab extending, and flow behavior in horizontal tube. The inhibition efficiency and drag reduction efficiency of the developed DRA have been investigated finally based on the relevant test methods. Results of corrosion test show that the developed DRA has very good inhibition effect on mild steel by brushing a thin layer of DRA on steel specimens, giving inhibition efficiency of 91.2% and 73.1% in 3%NaCl solution and standard salt fog environment respectively. Results of drag-reducing test also show that the Colebrook formula could be used to calculate friction factors on internal pipes with DRA as the Reynolds number is in the range of $0.75\times10^5\sim2.0\times10^5$. By comparing with normal industrial pipes, the friction resistance coefficient of the steel pipe with DRA on internal wall decreases by 13% and the gas flux increases by 7.3% in testing condition with Reynolds number of $2.0\times10^5$.

• Earthquakes and Structures
• /
• v.26 no.4
• /
• pp.261-267
• /
• 2024

With the increase in the exploitation depth of offshore oil and gas, it is possible to control the global buckling of deep-sea pipelines by the snake lay method. Previous studies mainly focused on the analysis of critical buckling force and critical temperature of pipelines under the snake-like laying method, and pipelines often suffer structural failure due to seismic disasters during operation. Therefore, seismic action is a necessary factor in the design and analysis of submarine pipelines. In this paper, the seismic action of steel pipes in the operation stage after global buckling has occurred under the active control method is analyzed. Firstly, we have established a simplified finite element model for the entire process cycle and found that this modeling method is accurate and efficient, solving the problem of difficult convergence of seismic wave and soil coupling in previous solid analysis, and improving the efficiency of calculations. Secondly, through parameter analysis, it was found that under seismic action, the pipe diameter mainly affects the stress amplitude of the pipeline. When the pipe wall thickness increases from 0.05 m to 0.09 m, the critical buckling force increases by 150%, and the maximum axial stress decreases by 56%. In the pipe soil interaction, the greater the soil viscosity, the greater the pipe soil interaction force, the greater the soil constraint on the pipeline, and the safer the pipeline. Finally, the pipeline failure determination formula was obtained through dimensionless analysis and verified, and it was found that the formula was accurate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.29-38
• /
• 1992

This paper describes the general formulation for the in-plane longitudinal and flexural coupled free vibration analysis of a branched structure. The branched structure, which is mainly found in machine tools, pipeline systems and so on, has some crooked parts and subsystems. And it modeled as a distributed mass system. The superiority of the present method to the transfer matrix method in the computation accuracy and speed was confirmed by the numerical computation results. Moreover, we comfirmed that boundary and intermediate conditions have been controlled by the spring constants.

• Journal of Welding and Joining
• /
• v.35 no.1
• /
• pp.55-60
• /
• 2017

There are many Industry Code and Standard (ICS) for Structural Integrity Assessment (SIA) on welded structure with defect. The general ICSs, such as R6, BS 7910 and API 579-1/ASME FFS-1, provide equations to determine the upper bound residual stress profiles based on collections from many literatures. However, these residual stress profiles used in the SIA cause the conservative design for welded structures. In this study, the structural integrity assessment for girth weld in pipeline has been conducted based on fracture mechanics. In addition, thermo-elastic plastic FE analysis was performed for evaluating the residual stress of girth weld in pipeline. The weight function solution is used to determine the stress intensity factor using the residual stress profile obtained by the FE analysis. This approach can account for redistribution and relaxation of residual stress as the defects grow. In order to the evaluate quantitative comparison between BS 7910 and weight function solution, structural integrity assessment determining allowable crack size on cracked pipe was performed with failure assessment diagram.

• Corrosion Science and Technology
• /
• v.16 no.3
• /
• pp.109-114
• /
• 2017

Monitoring of corrosion is in most cases based on simulation of environmental conditions on a large and complex structure such as a buried pipeline using a small probe, and the measurement of thermodynamics and kinetics of corrosion processes occurring on the probe surface. This paper presents a hybrid corrosion monitoring probe designed for simulating deteriorating conditions wrought by disbonded coatings and for measuring current densities and distribution of such densities on a simulated pipeline surface. The concept of the probe was experimentally evaluated using immersion tests under cathodic protection (CP) in high resistivity aqueous solution. Underneath the disbonded area, anodic currents and cathodic currents were carefully measured. Anodic current densities were used to calculate metal loss according to Faraday's law. Calculated corrosion patterns were compared with corrosion damage observed at the surface of the probe after a series of stringent tests. The capability of the probe to measure anodic current densities under CP, without requiring interruption, was demonstrated in high resistivity aqueous solution. The pattern of calculated metal loss correlated well with corrosion products distribution observed at the array surface. Working principles of the probe are explained in terms of electrochemistry.