• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.62-71
• /
• 1991

New Zealand 남섬의 Canterbury 지방과 Nelson 지방의 붕소(硼素) 결핍지역(缺乏地域)과 붕소(硼素) 시비지역(施肥地域)에 생육(生育)하고 있는 라디아타소나무의 해부학적(解剖學的) 차이(差異)를 조사(調査)하였다. 즉 가도관(假導官)의 길이, 방사방향(放射方向)의 가도관(假導官) 내경(內徑), 방사방향(放射方向) 세포벽(細胞璧)의 두께를 조(早), 만재별(晩材別)로 측정(測定)하였고 광학현미경(光學顯微鏡) 및 전자현미경(電子顯微鐘) 특성(特性)을 관찰(觀察) 하였다. 만재(晩材)에서는 가도관(假導官)의 길이에 붕소(硼素) 결핍지역(缺乏地域) 간(間)에 유의차(有意差)가 인정(認定)되었으나, 조재(早材)에서의 가도관(假導官)의 길이 및 가도관(假導官)의 내경(內徑) 및 가도관벽(假導官璧)의 두께는 조(早), 만재(晩材) 모두에서 유의차(有意差)가 인정(認定)되지 않았다. 그러나 붕소(硼素) 결핍지역(缺乏地域)에서 생육(生育)된 리디아타소마누에서는 세포벽(細胞璧)의 박리현상(剝離現象) 및 목질화(木質化)가 덜된 부분(部分)에 많이 관찰(觀察)되었고, 찌그러진 세포(細胞)의 다수출현(多數出現) 및 세포(細胞)의 크기가 불균일(不均一)한 것이 많이 출현(出現)되었으며 세포벽(細胞璧)의 간층(間層)이 넓었음이 관찰(觀察)되었다.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.507-518
• /
• 1982

Biogeochemistry of a 34-year-old red pine plantation on a Typic Udipsamment was investigated in the central sand plains of Wisconsin Biomass and net primary production were $106Mg\;ha^{-1}$ and $11.0Mg\;ha^{-1}y^{-1}$ respectively. Concentrations of elements in the vegetation were greatest in the 2- to 3-year-old needles, followed by current needles, current twigs, bole bark, live branches, dead branches, bolewood production, and bolewood. For a given tree component (excluding the current twigs), elemental concentrations were greatest in the upper one- third and least in the lower one- third of the tree. Total elements in the vegetation are ranked: N($222kg\;ha^{-1}$), Ca(217), K (85), Mg(38), S(31), and p. The soil contained from 60 to 89% of the readily available P, K, Ca, Mg, and S in the ecosystem. Whereas precipitation was the major source of N and S, weathering supplied the bulk of the Ca, Mg, P, and K. Output of a given element by leaching was less than $7kg\;ha^{-1}y^{-1}$ except for S which was $12kg\;ha^{-1}y^{-1}$ Whereas throughfall returned the greatest amounts of N, K, and S to the forest floor, litterfall accounted for the greatest returns of Ca, Mg, and P. Because of foliar leaching, net loading of all elements studied in the throughfall exceeded that of the precipitation. Ammonium in net precipitation was reduced by a factor of three within the upper 7.5cm due to uptake by fine roots.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.528-537
• /
• 2015

To reuse the waste bone from restaurants or butcher houses, the possibility of using waste bone powder after cooking as a filler for wood adhesives used in manufacturing plywood was investigated. Radiata pine (Pinus radiata D. Don) plywoods were manufactured by using commonly used wood adhesives such as urea-melamine formaldehyde (UMF) resin, urea-formaldehyde (UF) resin, and phenol-formaldehyde (PF) resin and the prepared fillers from cattle bone powder, pig bone powder, and seashell powder. Plywood fabricated by using cattle bone powder, pig bone powder, and seashell powder showed weaker performance in dry and wet glue-joint shear strength and wood failure than those of the plywood with wheat flour. The result showed that it was hard to use only bone powder for the replacement of wheat flour. However, the filler mixed with wheat flour and bone powders showed equivalent dry bonding strength and better water resistance than the wheat flour, indicating that bone powders mixed with wheat flour might be used for the manufacture of plywood. When bone powders were mixed with wheat flour as adhesive fillers the shell powder showed the lowest bonding properties and there was no big difference between the cattle bone powder and the pig bone powder.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.393-404
• /
• 2020

This study examined the material properties of MDF manufactured using acetylated pinus radiata fibers against moisture and compared the properties with the fiberboard quality standards of KS F 3200. Since acetylated MDF shows very low moisture content, water absorption and thickness swelling than the quality standards, it is expected to have an excellent dimensional stability. The bending strength in wetting condition of the acetylated MDF reached approximately 70% of the bending strength in dry condition, making it suitable for the quality standards. The internal bond of the acetylated MDF in the wetting condition was higher than the minimum internal bond of the quality standards in the dry condition, showing a good water resistance. Since the water droplet contact angle of the acetylated MDF is larger than that of untreated MDF, it is determined that it contributes in improving the water resistance due to the low wettability.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.4
• /
• pp.311-322
• /
• 2017

This study examined the traditional edible basis and ingredients of Song-gi used for Pyeon of Jong-ga ancestral ritual food. Through an investigation of references, a case study, and ingredient analysis for traditional edible basis of Song-gi, the nutritional value and availability as food material were reviewed. Among the 4 kinds of pine trees from 4,705 types of edible materials usable as food listed in the ${\ll}$Korea Food Standards Codex${\gg}$, 'Pinus radiata D. Don', in which the husk is acknowledged as an edible food, was applied in this study. This study processed the Song-gi following the method of jong-ga and divided into pine inner bark (PIB) and pine inner bark powder (PIBP) to analyze the general composition and dietary fiber. The main composition of PIB was carbohydrate, in which the content was 88.7% per 100 g. The content of dietary fiber was 73.7% per 100 g and the insoluble dietary fiber reached 92.3% in total dietary fiber. In conclusion, the edibility of Song-gi, which has a considerable amount of insoluble dietary fiber caused constipation because it absorbed the moisture in the intestine due to the lack of nutrients but may be developed as a functional food that helps the digestive activation of the intestine and improve the health of the intestine if taken with balanced nutrition.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.6
• /
• pp.616-623
• /
• 2010

Recently, interests in indoor air quality (IAQ) have been increased; however, a number of researchers have mainly focused on anthropogenic volatile organic compounds (AVOC) emitted from building materials. Therefore, the properties of natural VOC (NVOC) and anthropogenic VOC (AVOC) emitted from wood-based panels was investigated in this work. VOCs emitted from these panels were sampled through Tenax TA/Cabotrap and analyzed by GC-MS and GC-FID. Comparisons were made concerning TVOC, NVOC, and composition ratios of NVOC. It was revealed that TVOC emission rates of midium density fiber (MDF) were the highest. Besides, it was found that emissions of NVOC from wood-based panels were much higher than those of anthropogenic AVOC except for plywood of Oceania timber. It was also observed that the composition ratio of NVOC emitted from plywood of Pinus radiata was the highest as 65% of TVOC. Major NVOC components were monoterpene compounds such as $\alpha$-pinene, $\beta$-pinene, d-limonene, camphene and $\alpha$-terpinene. It was concluded that the composition rates of VOCs emitted from building materials were clearly different according to the raw materials and manufacturing methods.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.5
• /
• pp.548-557
• /
• 2017

This study investigated the effects of insoluble dietary fibers from pine (Pinus radiata D. Don) inner bark powder (PIBP) on loperamide constipation in rats. Male Sprague-Dawley rats were administered PIBP in their diets at concentrations of 5% and 10% for 4 weeks. Rats were divided in to four groups, normal diet group (Cont), a normal diet and loperamide group (Lop), 5% PIBP experimental diet and loperamide group (Lop+PIBP 5%), and 10% PIBP experimental diet and loperamide group (Lop+PIBP 10%). Constipation was induced by oral administration of loperamide (2 mg/kg, twice per day) for the last three days of the experiment. Food intake, body weight, properties of feces, gastrointestinal transit time, and serum lipid profiles were measured. When compared with the normal diet and loperamide group (Lop), there were increases in fecal pellet number (p<0.05), wet weight (p<0.001), and water content (p<0.001). Positive results were derived from relevant indicators to improve constipation. In addition, the number of fecal pellets in the colon was not significant, and decreased as PIBP content increased. PIBP had a concentration-dependent effect on reduction of total cholesterol, LDL-cholesterol, and triglycerides and elevation of HDL-cholesterol. These results indicate that PIBP may effectively prevent constipation.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.1-32
• /
• 1972

By means of the interspecific hybridization in the Sub-genus Diploxylon of the Genus Pinus, $F_1$ hybrids of Pinus rigida${\times}$elliottii, Pinus rigida${\times}$radiata, P. rigida${\times}$serotina and P. densiflora${\times}$thunbergii had been produced. And on the basis of the crossabilities of these hybrids the taxonomic affinities of these pines were examined. And the needle characteristics of these hybrid and the occurence of phenolic substances in these $F_1$ hybrid were also investigated to see the potential usefulness of these characteristics for the diagnosis of the taxonomic affinity. And, the growth performances of the $F_1$ hybrids have also been compared with those of parental species. In order to contribute to the establishment of the hybrid seed orchard the introgression phenomena between P. densiflora and P. thunbergii in the eastern coastal area have also been investigated along with the investigation of the heterozygosity of plus trees of P. densiflora growing in the clone bank in Suwon. And the results were summarized as follows. 1. On the basis of crossabilities as well as on the taxonomic affinities according to the systems of Shaw, Pilger and Duffield, it has been proven that the parental species of those hybrids are of close affinities and range of the fertile hybrid seed production rate was as high as 28-58% in the best hybrid combination (Table 13). 2. Among those hybrids, the ${\times}$ Pinus, rigiserotina hybrid seemed to be most promising in the growth performance exhibiting 109-155% more volume growth compared to the seed parent with the statistic significance of 1% level (Tables 16 and 17). 3. Notwithstanding the fact that the all of the pollen parents are cold tender, all hybrids exhibit cold hardiness as much as their seed parent and it seems to suggest that the characteristics of cold hardiness were transmitted from the seed parent. 4. Though a striking difference in needle length was observed between the parental species of each hybrid, it was difficult to distinguish each hybrid from their seed parent by the needle length except ${\times}$P. rigiserotina which is characterized by long needle which is 65% more longer than the needle of the seed parent (Table 21). 5. With regard to the anatomical characteristics of needle, the hypoderm is apparently thicker in most of the $F_1$ hybrid pines and the characteristics of resin canals are dominated by medial in most $F_1$ hybrid. And, the fibrovascular bundles were apart as were in their seed parent. Therefore it was found to be possible to distinguish the hybrids pines from their parents by the needle characteristics. And, it is to be noticed that the ${\times}$P. densithunbergii was more close to the pollen parent having RDI value of 0.73 (Fig.l, Table 22). 6. It has been demonstrated that ${\times}$P. rigielliottii, ${\times}$P. rigiradiata and ${\times}$P. rigitaeda have a phenolic substance (No.7) of light yellow at Rf-0.46, same as their seed parent, but no trace of phenolic substance was observed in their pollen parent. This fact will serve as an important criteria for early identification of hybridity in progeny testing. However, the fact that both of ${\times}$P. rigiserotina and ${\times}$P. densithunbergii exhibit the same reactions of phenolic substances as well their parental species seems to indicate the close affinities between the parental species of the respective hybrid (Fig.2, Table 23). 7. The separation and the reaction of phenolic substance developed on TLC were found to be same in the same species showing no variations between the individuals, and no variations due to tree part of sampling, tree age or pollen sources. And the reaction was also observed regardless of the not varied by the kind of developing solvent whether it is Aceton-Chloroform (3:7 v/v) or Benzene-Methanol-Acetic acid (90:16:8 v/v). 8. The introgression phenomena of natural Pinus densifiora stand in both east and west coastal area indicates that the major part of the red pines investigated are all heterozygous and the heterozygosity of pines are higher in the west coast than in the east coast(Tables 24 and 25). 9. Based on the RDI, among the plus trees of Pinus densiflora selected in Korea and Japan as well, no pure P. densiflora has been found. Since all of the sample trees of Pinus densiflora were found to be as heterozygous bearing part of the characteristics of P. thunbergii, those red pines were considered to be natural heterotic hybrid pines(Figs. 3 and 4. Tables 26 and 27).