• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.880-884
• /
• 2011

ZnO nanorods were grown by hydrothermal method. Two kinds of seed layers, Au film and island seed layers were prepared to investigate the effect of seed layer on ZnO nanorods. The ZnO nanorod on Au island seed layer has more unifom diameter and higher density compared to that of ZnO nanorod on Au film seed layer. The ZnO nanorods on Au island seed layer were annealed at various temperatures ranging from 300 to $850^{\circ}C$. The pinholes at the surface of the ZnO nanorods is formed as the annealing temperature is increased. It is noted that the pyramid structure on the surface of ZnO nanorod is observed at $850^{\circ}C$. The intensity of ZnO (002) diffraction peak in X-ray diffraction pattern and intensity of near band edge emission (NBE) peak in photoluminescence (PL) are increased as the ZnO nanorods were annealed at the temperature of $300^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 춘계학술대회 논문집
• /
• pp.46-49
• /
• 1992

Cadmium sulfide thin films were deposited on glass substrate by Chemical Mist Deposition from solutions containing equimolar (0.1M) cadmium chloride and thiourea [(NH$_2$)$_2$CS] at a mist velocity of 1.6m/sec. Substrate temperatures were ranged between 200$^{\circ}C$ and 400$^{\circ}C$. The microstructure and semiconducting property of the films were investigated using SEM, X-ray diffraction, UV transmittance measurement and four point probe method. All the films have hexagonal structure and diffraction patterns indicate that the intensity of (112) and (101) reflections increase with increasing substrate temperature, whereas (002) reflection substrate temperature, whereas(002) reflection decrease for substrate temperatures between 250$^{\circ}C$ and 350$^{\circ}C$. The films prepared at lower temperature have a significant number of pinholes due probably to entrapped gaseous reaction. Optical transmittance of the films deposited at 350$^{\circ}C$ was about 75%. Optical bandgap of the films were 2.43eV regardless of substrate temperature. The dark resistivity of the films decreased with increasing substrate temperature up to 300$^{\circ}C$ and increased with further increasing substrate temperature. The films were photosensitive and had dark-to-light resistivity ratios of about 10 at room temperature for a white-light photoexcitation intensity of 50mw/$\textrm{cm}^2$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.47-47
• /
• 2010

Discharge under the water is very hard and demand considerable high voltage. But specially improved electrode can generate plasma discharge to salty water with relatively low voltage. A round shape ceramic electrode having many pinholes combined with metallic one can generate plasma. 400 volt, 10 kHz and 3 micro second pulse width were applied to repeatedly running synthetic seawater with 10 L/m velocity, containing cultivated E. coli and Bacillus. As a result, 18, 94, 99.97, 100, 100 % disinfection rates to E. coli and 17.1, 17.1, 82.9, 99.4, 99.9 % disinfection rates to Bacillus subtilis were achieved to 1, 2, 3, 4, 5 times repetitive treatment respectively. In the plasma condition, the ions and electrons are separated and new kinds of components are re-synthesized by the intensive movement of the components. Especially chlorine ions are separated and recombined to residual free chlorine like HOCl, $OCl^-$. The residual free chlorine concentrations of discharged water were 0.25, 0.88, 1.39, 1.59, 1.66 mg $Cl_2$/L after 5 times treatment respectively. Another unconfirmed radical and oxidants for example, OH, $H_2O_2$, and $O_3$ can have an effect on microorganism of course.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.301-306
• /
• 2003

Multilayered WC-Ti/suv $1-x/Al_{x}$ N coatings were deposited on AISI D2 steel using cathodic arc deposition (CAD) method. These coatings contain structural defects such as pores or droplets. Thus, the substrate is not completely isolated from the corrosive environment. The growth defects (pores, pinholes) in the coatings are detrimental to corrosion resistance of the coatings used in severe corrosion environments. The localized corrosion behavior of the coatings was studied in deaerated 3.5 wt.% NaCl solution using electrochemical techniques (potentiodynamic polarization test) and surface analyses (GDOES, SEM, AES, TEM). The porosity was calculated from the result of potentiodynamic polarization test of the uncoated and coated specimens. The calculated porosity is higher in the $WC-Ti_{0.6}$ $Al_{0.4}$ N than others, which is closely related to the packing factor. The positive effects of greater packing factor act on inhibiting the passage of the corrosive electrolyte to the substrate and lowering the localized corrosion kinetics. From the electrochemical tests and surface analyses, the major corrosion mechanisms can be classified into two basic categories: localized corrosion and galvanic corrosion.

• 한국인공지능학회지
• /
• 제10권2호
• /
• pp.7-11
• /
• 2022

OLED displays cannot be used permanently due to burn-in or generation of dark spots due to degradation. Therefore, the time when the display can operate normally is very important. It is close to impossible to physically measure the time when the display operates normally. Therefore, the time that works normally should be predicted in a way other than a physical way. Therefore, if you do computer simulations based on artificial intelligence, you can increase the accuracy of prediction by saving time and continuous learning. Therefore, if we do computer simulations based on artificial intelligence, we can increase the accuracy of prediction by saving time and continuous learning. In this paper, a dataset in the form of development from generation to diffusion of dark spots, which is one of the causes related to the life of OLED, was generated by applying the finite element method. The dark spots were generated in nine conditions, such as 0.1 to 2.0 ㎛ with the size of pinholes, the number was 10 to 100, and 50% with water content. The learning data created in this way may be a criterion for generating an artificial intelligence-based dataset.

• 한국재료학회지
• /
• 제34권4호
• /
• pp.215-222
• /
• 2024

Because collagen is inherently piezoelectric, research is being actively conducted to utilize it to harvest energy. In this study, a collagen solution was prepared using edible low-molecular-weight peptide collagen powder, and collagen films were fabricated using a dip coating method. The collagen films prepared by dip coating showed a smooth surface without defects such as pinholes or cracks. Dehydrothermal treatment of the collagen films was performed to induce a stable molecular structure through cross-linking. The collagen film subjected to dehydrothermal treatment at 110 ℃ for 24 h showed a thickness reduction rate of 19 %. Analysis of the collagen films showed that the crystallinity of the collagen film improved by about 7.9 % after dehydrothermal treatment. A collagen film-based piezoelectric nanogenerator showed output characteristics of approximately 13.7 V and 1.4 ㎂ in a pressure test of 120 N. The generator showed a maximum power density of about 2.91 mW/m² and an output voltage of about 8~19 V during various human body movements such as finger tapping. The collagen film-based piezoelectric generator showed improved output performance with improved crystallinity and piezoelectricity after dehydrothermal treatment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.86.2-86.2
• /
• 2010

In order to improve polymer electrolyte membrane fuel cell (PEMFC) durability, the durability of membrane electrode assemblies (MEA), in which the electrochemical reactions actually occur, is one of the vital issues. Many articles have dealt with catalyst layer degradation of the durability-related factors on MEAs in relation to loss of catalyst surface area caused by agglomeration, dissolution, migration, formation of metal complexes and oxides, and/or instability of the carbon support. Degradation of catalyst layer during long-term operation includes cracking or delamination of the layer which result either from change in the catalyst microstructure or loss of electronic or ionic contact with the active surface, can result in apparent activity loss in the catalyst layer. Membrane degradation of the durability-related factors on MEAs can be caused by mechanical or thermal stress resulting in formation of pinholes and tears and/or by chemical attack of hydrogen peroxide radicals formed during the electrochemical reactions. All of these effects, the mechanical damage of membrane and degradation of catalyst layers are more facilitated by uneven stress or improper MEA fabrication process. In order to improve the PEMFC durability, therefore, it is most important to minimize the uneven stress or improper MEA fabrication process in the course of the fabrication of MEA. We analyzed the effects of the MEA fabrication condition on the PEMFC durability with MEA produced using CCM (catalyst coated membrane) method. This paper also investigated the effects of MEA fabrication condition on the PEMFC durability by adding additional treatment process, hot pressing and pressing, on the MEA produced using CCM method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.187-193
• /
• 2010

Chromium nitride (CrN) samples with two different layer structures (multilayer and single layer) were coated on bipolar plates of polymer electrolyte membrane fuel cells (PEMFC) using the reactive sputtering method. The effects with respect to layer structure on corrosion resistance and overall cell performance were investigated. A continuous and thin chromium nitride layer ($Cr_{0.48}\;N_{0.52}$) was formed on the surface of the SUS 316L when the nitrogen flow rate was 10 sccm. The electrochemical stability of the coated layers was examined using the potentiodynamic and potentiostatic methods in the simulated corrosive circumstances of the PEMFC under $80^{\circ}C$. Interfacial contact resistance (ICR) between the CrN coated sample and the gas diffusion layer was measured by using Wang's method. A single cell performance test was also conducted. The test results showed that CrN coated SUS316L with multilayer structure had excellent corrosion resistance compared to single layer structures and single cell performance results with $25\;cm^2$ in effective area also showed the same tendency. The difference of the electrochemical properties between the single and multilayer samples was attributed to the Cr interlayer layer, which improved the corrosion resistance. Because the coating layer was damaged by pinholes, the Cr layer prevented the penetration of corrosive media into the substrate. Therefore, the CrN with a multilayer structure is an effective coating method to increase the corrosion resistance and to decrease the ICR for metallic bipolar plates in PEMFC.

• 한국식품저장유통학회지
• /
• 제15권6호
• /
• pp.791-795
• /
• 2008

아황산가스 발생제를 자가 제조하여 포도의 저장 중 병해발생 방지에 이용하는 방법을 확립하기 위하여 sulfite 화합물의 아황산가스 발생 정도와 지속 기간을 측정하고 아황산가스 발생 조절 및 간이 검출 방법을 개발하였다. 포도의 저장 중 잿빛곰팡이병을 일으키는 B. cinerea의 포자 발아와 균사생장은 각각 400 ppm과 3200 ppm의 아황산가스 농도 조건에서 억제되었다. 5종류의 sulfite 및 bisulfite 화합물 중 sodium hydrosulfite는 아황산가스 발생량이 가장 높았으며 이를 비닐 포장하여 포장의 pinhole수를 조절하거나 산 또는 알카리의 pH 조절제를 혼합하면 가스 발생량과 발생 지속 기간을 조절할 수 있었다. Malachite green 용액은 아황산가스에 의해 정량적으로 탈색되어 아황산가스 검출에 이용할 수 있었으며 여과지에 흡수하여 건조할 경우 아황산가스 검출지로 활용할 수 있었다. MBA 포도를 속효성과 지효성의 아황산가스 발생제를 동시에 처리하여 저온 저장할 경우 병해 발생을 감소시킬 수 있었다.